SatEurope.net
Z2U.com - IPTV
CardShare.cc
Advertise Here
Advertise Here
Advertise Here
Advertise Here
Advertise Here
Page 11 of 11 FirstFirst ... 691011
Results 101 to 107 of 107

Thread: ║➽║OScam║➽║ OScam-emu for gx chip║v.11.960║

  1. #101
    Super Moderator mehmetkarahanlı's Avatar
    Join Date
    29-12-2017
    Location
    bursa
    Posts
    33,094
    Uploads
    241
    Likes
    17,437

    Re: ║➽║OScam║OScam-emu for gx chip║v.11.920║

    updated to oscam-gx-2.26.01-11920-802@53e664fa
    fix: module monitor
    * fix: module monitor
    print date|time instead of time twice


    Compatible STBs:

    Octagon SF8008
    Octagon SFX6008
    Octagon SFX6018
    Octagon SX988
    Octagon SX88 V2
    Octagon SX888 V2 4K
    Octagon SF8008 SUPREME

    Next Innova 4K

    Hiremco Turbo S10
    Hiremco Turbo 4K

    Sungate Titan 4K

    Spider NO1
    Spider NO1+
    Spider VIP
    - oscam-gx-2.26.01-11920-802
    - fix module monitor
    - fix module monitor



  2. SatEurope.net
  3. #102
    Super Moderator mehmetkarahanlı's Avatar
    Join Date
    29-12-2017
    Location
    bursa
    Posts
    33,094
    Uploads
    241
    Likes
    17,437

    Re: ║➽║OScam║OScam-emu for gx chip║v.11.923║

    updated to oscam-gx-2.26.01-11923-802@e29c6da9

    * drop dead code in newcamd module
    des_key_spread will never leave key[7] non-null - v2mask and getmask would never be executed
    thx to @lpm11


    Compatible STBs:

    Octagon SF8008
    Octagon SFX6008
    Octagon SFX6018
    Octagon SX988
    Octagon SX88 V2
    Octagon SX888 V2 4K
    Octagon SF8008 SUPREME

    Next Innova 4K

    Hiremco Turbo S10
    Hiremco Turbo 4K

    Sungate Titan 4K

    Spider NO1
    Spider NO1+
    Spider VIP

    PHP Code:
    oscam-gx-2.26.01-11923-802@e29c6da9-hisi.zip 

  4. #103
    Super Moderator mehmetkarahanlı's Avatar
    Join Date
    29-12-2017
    Location
    bursa
    Posts
    33,094
    Uploads
    241
    Likes
    17,437

    Re: ║➽║OScam║OScam-emu for gx chip║v.11.940║

    updated to oscam-gx-2.26.01-11940-802@c0b080cd
    reader: add maxparallel feature to limit simultaneous services per reader

    This feature allows limiting the number of services that can use a reader
    simultaneously, essential for card readers with slot restrictions.

    === NEW CONFIGURATION OPTIONS ===

    maxparallel (default: 0 = unlimited)
    Maximum number of active services per reader. When reached, the reader
    is skipped and other readers are tried (fallover).

    paralleltimeout (default: 1000 ms)
    Buffer added to the measured ECM interval for slot expiration.
    A slot expires when no ECM is received within (measured_interval + timeout).

    parallelfactor (default: 1.5)
    Multiplier for pending slots to support zapping without blackscreen.
    Set to 0 to disable pending slots (strict maxparallel enforcement).

    === ARCHITECTURE ===

    Dual-slot system with active and pending services:

    - Active slots (size: maxparallel)
    Confirmed services actively receiving CWs from this reader.

    - Pending slots (size: maxparallel * parallelfactor)
    Temporary overflow during channel zapping. Pending services are
    promoted to active when slots free up (FIFO), or dropped when
    active services need the capacity.

    Slot reservation timing:
    Slots are reserved when a reader DELIVERS a CW, not when the request
    is sent. This prevents readers from blocking capacity for services
    they don't end up serving when multiple readers are queried in parallel.

    === BLOCKLIST FOR CLEAN FALLOVER ===

    When a pending service is dropped, the client+service combination is
    added to a per-reader blocklist. This causes:

    - Subsequent ECM requests for blocked combinations to skip this reader
    - Clean fallover to other readers without repeated drop cycles
    - No log spam from services repeatedly going to pending and getting dropped

    Blocklist lifecycle:
    - Added: when service is dropped from pending
    - Removed: when client zaps to a different service
    - Cleared: when an active slot becomes free

    === TYPICAL USE CASE ===

    - Reader 1: maxparallel=1 (card allows only 1 service)
    - Receiver records Service A on Reader 1, user zaps to Service B
    - Service B goes to pending slot (no blackscreen during zap)
    - Service A sends ECM -> Service B dropped from pending
    - Service B blocklisted on Reader 1 -> falls over to Reader 2 - User stops Service B -> block cleared, Reader 1 available again


    Compatible STBs:

    Octagon SX88
    Octagon SX88+
    Octagon SX88+ Optima
    Octagon SX88+ Combo
    Octagon SX888 IP
    Octagon ASAT HDR No.1
    Octagon SX87

    Denys H.265
    Denys H.265_EU
    Denys H.265_PRO
    Denys H.265_PRO_Combo
    Denys H. 265_PRO_Combo_EU
    Denys 2 / 2.2

    Golden Interstar ALPHA X

    Hiremco GT Turbo V8D+
    Hiremco Turbo IPTV

    Sungate Titan IPTV
    Sungate Titan Pro
    PHP Code:
    oscam-gx-2.26.01-11940-802@c0b080cd-hisi.zip 

  5. #104
    Super Moderator mehmetkarahanlı's Avatar
    Join Date
    29-12-2017
    Location
    bursa
    Posts
    33,094
    Uploads
    241
    Likes
    17,437

    Re: ║➽║OScam║OScam-emu for gx chip║v.11.940║

    updated to oscam-gx-2.26.01-11940-802@c0b080cd
    reader: add maxparallel feature to limit simultaneous services per reader

    This feature allows limiting the number of services that can use a reader
    simultaneously, essential for card readers with slot restrictions.

    === NEW CONFIGURATION OPTIONS ===

    maxparallel (default: 0 = unlimited)
    Maximum number of active services per reader. When reached, the reader
    is skipped and other readers are tried (fallover).

    paralleltimeout (default: 1000 ms)
    Buffer added to the measured ECM interval for slot expiration.
    A slot expires when no ECM is received within (measured_interval + timeout).

    parallelfactor (default: 1.5)
    Multiplier for pending slots to support zapping without blackscreen.
    Set to 0 to disable pending slots (strict maxparallel enforcement).

    === ARCHITECTURE ===

    Dual-slot system with active and pending services:

    - Active slots (size: maxparallel)
    Confirmed services actively receiving CWs from this reader.

    - Pending slots (size: maxparallel * parallelfactor)
    Temporary overflow during channel zapping. Pending services are
    promoted to active when slots free up (FIFO), or dropped when
    active services need the capacity.

    Slot reservation timing:
    Slots are reserved when a reader DELIVERS a CW, not when the request
    is sent. This prevents readers from blocking capacity for services
    they don't end up serving when multiple readers are queried in parallel.

    === BLOCKLIST FOR CLEAN FALLOVER ===

    When a pending service is dropped, the client+service combination is
    added to a per-reader blocklist. This causes:

    - Subsequent ECM requests for blocked combinations to skip this reader
    - Clean fallover to other readers without repeated drop cycles
    - No log spam from services repeatedly going to pending and getting dropped

    Blocklist lifecycle:
    - Added: when service is dropped from pending
    - Removed: when client zaps to a different service
    - Cleared: when an active slot becomes free

    === TYPICAL USE CASE ===

    - Reader 1: maxparallel=1 (card allows only 1 service)
    - Receiver records Service A on Reader 1, user zaps to Service B
    - Service B goes to pending slot (no blackscreen during zap)
    - Service A sends ECM -> Service B dropped from pending
    - Service B blocklisted on Reader 1 -> falls over to Reader 2 - User stops Service B -> block cleared, Reader 1 available again


    Compatible STBs:

    Octagon SF8008
    Octagon SFX6008
    Octagon SFX6018
    Octagon SX988
    Octagon SX88 V2
    Octagon SX888 V2 4K
    Octagon SF8008 SUPREME

    Next Innova 4K

    Hiremco Turbo S10
    Hiremco Turbo 4K

    Sungate Titan 4K

    Dreamstar Master 4K

    Spider NO1
    Spider NO1+
    Spider VIP

    PHP Code:
    oscam-gx-2.26.01-11940-802@c0b080cd-gx.zip 

  6. #105
    Super Moderator mehmetkarahanlı's Avatar
    Join Date
    29-12-2017
    Location
    bursa
    Posts
    33,094
    Uploads
    241
    Likes
    17,437

    Re: ║➽║OScam║ OScam-emu for gx chip║v.11.940║

    oscam-2.26.02-11943-802@c656fef9-armv7-vuplus4k-linux-gnueabihf-libusb-libdvbcsa
    PHP Code:
    oscam-2.26.02-11943-802@c656fef9-armv7-vuplus4k-linux-gnueabihf-libusb-libdvbcsa (1).zip 

  7. #106
    Super Moderator mehmetkarahanlı's Avatar
    Join Date
    29-12-2017
    Location
    bursa
    Posts
    33,094
    Uploads
    241
    Likes
    17,437

    Re: ║➽║OScam║ OScam-emu for gx chip║v.11.943║

    updated to oscam-gx-2.26.02-11943-802@c656fef9
    dvbapi: use SERVICE_TYPE_MASK descriptor to fix CW delivery for shared services
    When stream_write_cw() successfully delivers a CW to a stream client,
    it returns true and prevents the same CW from being written via the
    CA device (ioctl/netsend). This exclusive routing causes a CW gap
    on demuxers that require CA device delivery until the next cw cycle,
    because stream_write_cw() consumes the CW before the stream client
    has fully disconnected.

    Parse the SERVICE_TYPE_MASK descriptor (0x85) from the CA PMT to
    identify whether a demux serves a stream client (type 7/8) or requires
    direct CA device or netsend descrambling. For demuxers that require
    CA device or netsend delivery, always write the CW via dvbapi_write_cw
    regardless of whether stream_write_cw() consumed it. For stream-only
    demuxers and clients that don't send descriptor 0x85, preserve the original exclusive behavior.
    Compatible STBs:

    Octagon SF8008
    Octagon SFX6008
    Octagon SFX6018
    Octagon SX988
    Octagon SX88 V2
    Octagon SX888 V2 4K
    Octagon SF8008 SUPREME

    Next Innova 4K

    Hiremco Turbo S10
    Hiremco Turbo 4K

    Sungate Titan 4K

    Dreamstar Master 4K

    Spider NO1
    Spider NO1+
    Spider VIP
    PHP Code:
    oscam-gx-2.26.02-11943-802@c656fef9-hisi.zip 

  8. Z2U.com - IPTV
  9. #107
    Super Moderator mehmetkarahanlı's Avatar
    Join Date
    29-12-2017
    Location
    bursa
    Posts
    33,094
    Uploads
    241
    Likes
    17,437

    Re: ║➽║OScam║➽║ OScam-emu for gx chip║v.11.960║

    updated to oscam-gx-2.26.05-11960-802@d9e40e77
    webif: drop unused loop counter in pages_gen.c
    GCC >= 9 -Wunused-but-set-variable flags the 'i' counter in the
    strtok_r dependency loop — only incremented, never read. The two
    strtok_r() calls already drive the iteration via the ptr return, so the counter is dead weight.


    Compatible STBs:

    Octagon SF8008
    Octagon SFX6008
    Octagon SFX6018
    Octagon SX988
    Octagon SX88 V2
    Octagon SX888 V2 4K
    Octagon SF8008 SUPREME

    Next Innova 4K

    Hiremco Turbo S10
    Hiremco Turbo 4K

    Sungate Titan 4K

    Dreamstar Master 4K

    Spider NO1
    Spider NO1+
    Spider VIP




Page 11 of 11 FirstFirst ... 691011

Similar Threads

  1. Replies: 60
    Last Post: 23-08-2026, 01:19:26
  2. Update ║➽║OScam║➽║ OScam_Emu_Only║By VeRDe║🔴v.11.966║
    By Mafia_DZ in forum OSCam Binaries
    Replies: 42
    Last Post: 27-07-2026, 18:28:57
  3. Update ║➽║OScam║➽║Oscam_Binary tausch║11.965║By_kitte888║
    By mehmetkarahanlı in forum OSCam Binaries
    Replies: 20
    Last Post: 05-07-2026, 20:39:20
  4. Update ║➽║OScam║Emu Patch Manager║v.11.945║By speedy005║
    By mehmetkarahanlı in forum OSCam Binaries
    Replies: 19
    Last Post: 23-06-2026, 20:50:55
  5. Replies: 9
    Last Post: 17-05-2026, 13:29:00

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •