MultiCS r82-hellboy

[turbopower]

Настройката при мен е следната. oscam през localhost на сървъра където е hb и oscam в къщи на телевизора където гледам. Дал съм си настройките в предишните постове. Единствено което се сещам е че понеже имам failban на hb и ми блокираше телевизора съм задал това NOIPFAILBAN: и ипто на телевизора. Всичко работи добре от момента в който съм го настроил

[turbopower]

Download link in the first post

Be careful with DISABLECRCCWS_ONLY_FOR it must be changed in the new way!

## r82-hellboy-V33
- [FIX] added 1801 to able to set provid
- [ENH] you can now exclude from crccwcheck with DISABLECRCCWS_ONLY_FOR: 0500:030B00,032830,043800,043820,050F00 (same syntax like oscam caid:provider,provider;caid;caid), to show the REMOTE DISABLED CWC CAIDS in correct format with provid and caid UPDATE RECOMENDED.
- [FIX] 1708,1709 half nulled DCW fix for lines
- [FIX] 1708,1709 for cache lines too, please don't forget to skip checksum test for this caid
- [CLN] Removed the club link because no more online support
- [FIX] all input field's like <select text input textarea> the whole page by refresh will not be updated till they on focus
- [ENH] added favicon to webif so no more error in console of browser because of missing
- [ENH] added search funtion to all the Pages where could be useful
- [FIX] Fix the username and password for cacheex now it can contains #$%^& and other chars as well ( please read the multics.cfg file for more Info )
- [ENH] if you move your mouse over the Debug Log Window, the Update of Log will stop, until you move your mouse out of Log area (like in Oscam)
- [FIX] cs378x keepalive fixed CS378X KEEPALIVE: YES after port

[turbopower]

Download link from the first post

IMPORTANT FROM HB34 CACHEEX IS NOT SUPPORTED ANY MORE!

## Changelog
## r82-hellboy-V34
- [FIX] If there someone not use the right new syntax for DISABLECRCCWS_ONLY_FOR: , the server won't start.
- [FIX] Show current Config ============ DISABLECRCCWS ============= will show the right values now.
- [FIX] If there is no DISABLECRCCWS option defined in config then it will take palce a default hardcoded list with these caids 098C:000000, 09C4:000000, 098D:000000, 1811:003311, 1811:023311, 1811:003315, 1811:003341, 1811:00331B, 1811:000007, 1811:000107, 0500:030B00, 0500:050F00, 1817:00006A, 1818:00006C, 1818:000007, 1819:00006D, 1819:000007, 0E00:000000, 1884:000000, 1708:000000, 1709:000000, 1841:000000
- [CLN] removed complete cacheex module not to have problems with oscam.

[EVIL DEAD]

Download link from the first post

IMPORTANT FROM HB34 CACHEEX IS NOT SUPPORTED ANY MORE!

[FONT="]## Changelog[/FONT]
[FONT="]## r82-hellboy-V34[/FONT]
[FONT="]- [FIX] If there someone not use the right new syntax for DISABLECRCCWS_ONLY_FOR: , the server won't start.[/FONT]
[FONT="]- [FIX] Show current Config ============ DISABLECRCCWS ============= will show the right values now.[/FONT]
[FONT="]- [FIX] If there is no DISABLECRCCWS option defined in config then it will take palce a default hardcoded list with these caids 098C:000000, 09C4:000000, 098D:000000, 1811:003311, 1811:023311, 1811:003315, 1811:003341, 1811:00331B, 1811:000007, 1811:000107, 0500:030B00, 0500:050F00, 1817:00006A, 1818:00006C, 1818:000007, 1819:00006D, 1819:000007, 0E00:000000, 1884:000000, 1708:000000, 1709:000000, 1841:000000[/FONT]
- [CLN] removed complete cacheex module not to have problems with oscam.

Thanks for the update , but why would they remove the cacheEx Completely from this version ?!

[turbopower]

Because some guys which doing oscam AIO patch complained about fake cwc pushed to oscam.
Actually most of the people didn't change their DISABLECRCCWSsetting when HB34.

[EVIL DEAD]

Because some guys which doing oscam AIO patch complained about fake cwc pushed to oscam.
Actually most of the people didn't change their DISABLECRCCWSsetting when HB34.

thanks for the info my friend , that's true multics is a source for fake dcw to oscam users and this mainly because of bad config and bad sources , but i think the hellboy version as stated will continue to use CacheEx and some other news say that it will limit the exchange to HB35 and above. Nothing is clear until now maybe the new version will be released by today i hope that .


regards

[turbopower]

Yes HB35 will be new start, but bare in mind. All of our lines will be down at the beginning until HB35 gain popularity. I will update it from the beginning. I hope everybody do the same.
This is the change log of the version, only some little testing is needed and it will be released.

r82-hellboy-V35
- [FIX] SMS box on cache page size overflow fixed
- [ENH] Hellboy up v35, MultiCS Cache will be accepted only from Hellboy v35 and up
- [ENH] Hellboy will block Cache from fake HB Versions
- [FIX] 0500 and some other caid's where not get cache hits is fixed
- [RET] Cacheex is back, because HBv35 tested to pull and push cacheex to oscam and MultiCS push only local generated clean CW's with no errors on oscam side
- [APY] Limit the F line number to 500, this is a hobby and we need to fight against PAYSERVERS, and HB was never PAYSERVER FUN and never supported PAYs!
- [UPD] DISABLECRCCWS_ONLY_FOR = 0500:030B00,032830,050F00;098C:000000;09 8D:000000;09C4:000000;1884:000000;1708:0 00000;1709:000000;1841:000000;1811:00331 1;0E00:000000 is hardcoded and tested by VFL and other members
- [ENH] CCcam will be allowed only (original, oscam and HB v35), all other will be blocked
- [ENH] Mgcamd and Newcamd servers will be blocked all versions and only (HB up v35 and oscam)will be allowed

[turbopower]

HB35 is here is a new start for multics old versions can exchange with this version!
Download link from the first post


r82-hellboy-V35
- [FIX] SMS box on cache page size overflow fixed
- [ENH] Hellboy up v35, MultiCS Cache will be accepted only from Hellboy v35 and up
- [ENH] Hellboy will block Cache from fake HB Versions
- [FIX] 0500 and some other caid's where not get cache hits is fixed
- [RET] Cacheex is back, because HBv35 tested to pull and push cacheex to oscam and MultiCS push only local generated clean CW's with no errors on oscam side
- [APY] Limit the F line number to 500, this is a hobby and we need to fight against PAYSERVERS, and HB was never PAYSERVER FUN and never supported PAYs!
- [UPD] DISABLECRCCWS_ONLY_FOR = 0500:030B00,032830,050F00;098C:000000;09 8D:000000;09C4:000000;1884:000000;1708:0 00000;1709:000000;1841:000000;1811:00331 1;0E00:000000 is hardcoded and tested by VFL and other members
- [ENH] CCcam will be allowed only (original, oscam and HB v35), all other will be blocked
- [ENH] Mgcamd and Newcamd servers will be blocked all versions and only (HB up v35 and oscam)will be allowed

[turbopower]

V36 е налична за сваляне https://www.satsupreme.com/download....82-hellboy-v36
Тази версия може да разменя линии само с V35 от предишните

## Changelog
## r82-hellboy-V36
- [FIX] CS378X fixed, now working LG Cacheex from OSCAM ( here must be some more functionalities to Implement, because only can to connect and if LG active then no hits ) and CS378X Normal lines working again
- [ENH] Added sort to all important Fields like in: Cache ( HOST, IP, ADDRESS, PING, REQUESTS, REPLIES, SENT REQ, SENT REP, CACHE HITS, INSTANT HITS ) and on Profiles ( TOTALECM, ACCEPTEDECM, ECM OK ) and at least in CacheEX ( HITS, INSTANT HITS ). If you are with mouse over these Tables the update is working only on ROW where the mouse over situated, if you move the mouse out of table the refresh comes back like normal. For sort you have to click on these Fields from table, every click change the sort order Descending then Ascending

[turbopower]

Пуснаха ver.37 може да я намерите в upload center
Поларис вече са с нов provider 000001

PROVIDERS:000000,000001

- [FIX] Polaris fix, now you able to set POVID in Profile fort this CAID: 4AEE since the provider changed to 000001
- [ENH] you should now have better times on client side on every provider ex: 09C4 now between 110-130ms