При вас има ли sky de при мен, без да съм тествал всички канали май само sky Action hd работи?
При вас има ли sky de при мен, без да съм тествал всички канали май само sky Action hd работи?
Работят си както преди/със забивки на някои канали/
Благодаря явно не всички са си обновили софтуера. Ще изчакам няколко дни тъпото е че тези които не са обновили пък ми дават добре др оператори. Нещо започва да ми писва от глупостите на скай май накрая ще ги зарежа.
Здравейте! Работи ли всичко без проблеми при вас? При мен за съжаление все още има силни прекъсвания. Поздрави
Аз мога да тествам довечера, и ще пиша. Основното е да се използва последната версия на oscam с точните настройки на клиента и на сървъра ако е с oscam, ако там е multics трябва да бъде с Hellboy V27. Същото трябва да бъде направено и от хората с които/ ако разменяте линии.
Все ще има някой който няма да е обновил и няма да му дреме и ще прехвърля файкове. Инак всичко си работи
Аз лично съм обновил всичко и продължава да не работи.
Ще чакам дано другите обновят.
Пък и ако не тръгне голяма работа и трите скай съм ги отписал отдавна.
Иначе на всеки все пак му се гледат немски канали без прекъсвания и те имат и други кодировки освен NDS
Може да направи както е по долу.
oscam.dvapi_.zip
Един колега ми даде тестова линия от сървър където германците са наред.
За жалост при мен не тръгна. Аз съм с телевизор Samsung F явно dvb-api не работи с новите настройки за скай.
Пробвах и с matrix air и там не тръгна, спомням си че някой беше писал че и оригиналните модули на скай не работят.
Така че само приемник или компютър с сат тунер, това излиза за сега.
Ето информация защо не работи при мен
Ето и обяснение какво точно са направили SkyThe TSP (Transport Stream Processor) is a separate microcontroller from the main CPU, with his own architecture and firmware. My guess is it is inside this fw where the cw crc take place.
CW in oscam server is looking good -> transfer to oscam in samsung tv (still looking good) -> using liboscam to transfer cw into TV firmware (as liboscam is not changing anything cw stil sould look good) -> TV firmware use this cw to send it to a memory address from where TSP use them to decrypt TS stream -> not working in NON T-MST firmware.
В моя случай сървъра ми си работи отлично, но хардуера на телевизора прави нещата невъзможни.The CW is an array of 8 bytes (64bits). Usually inside this array, the byte 4 and 8 are checksum (crc) bytes.
byte4 = (byte1 + byte2 + byte3) mod 255
byte8 = (byte5 + byte6 + byte7) mod 255
From what I've read Sky DE no longer respect this convention and the values of byte4 and byte8 are random.
The problem is by default Oscam/CCcam calculates the values of bytes4 and byte8 and put those in the CW returned to the decoder.
Oscam has a way to disable this default behavior, like setti stated before, using the disablecrccws option. But this only works if you have a local card. If you receive the decrypted ecms from a remote oscam server, you have to set the disablecrccws option on all the oscam server instances up the the real card.
Нещата пак се завъртат към спирания
За сега се говори че на 09С4 всичко е наред, няма как да тествам така че го оставям на васSky de anounced about starting made modyfication on his provider .
At 21.10.2019 on sky de somethimes will be problem with decoding chanells.
Sky is changing Channels to Sky1HD method. So you need Unique Key for your CARD + Oscam support for UQ Key
No. You need BoxID (easy), ins7e (easy), UQ Key from Card (hard) + Oscam with Support (hard)
I have 3 of 4 now...
Friends the problem is how to extract hw key from pace
Oscam is the last problem
V13 is easy = 8 Byte Key
V14/V15 is hard = 16 Byte Key
SkyDE отиват в историята на кардшаринга. От днес дори ги махнах от сървъра си замених ги с Max TV, там поне sd каналите работят за сега.Sky with new technology against TV piracy
In its ongoing battle against TV pirates, the pay-TV channel Sky has now activated a new technology. This is called "Unique Pairing" and firmly links the receiving device to the respective smart card. The aim is to exclude third-party equipment.
Sky has always been a crackdown on TV piracy, and in some cases, it has already had legal successes for the company. However, there are still regular illegal live streams of Bundesliga & Co. on the net. Now Sky has activated the "Unique Pairing" technology, which aims to make piracy more difficult. In the future, TV pirates will have an even harder time offering illegal streams on the internet.
Under the new procedure, the receiver is firmly connected to the respective smart card and will no longer work in third-party devices that are not licensed by Sky. The first reported on the measure was "InfoDigital". Opposite the online portal, Sky has confirmed the introduction of "Unique Pairing": "Sky relies on a safe and future-proof technology for the distribution of the transmission signal. In order to further increase our safety standards and comply with licensing requirements, technical changes have been made in recent weeks," a spokesman said.
However, customers who see Sky through one of the cable network operators or Telekom are not affected by the technical changeover. The company confirmed this to DWDL.de on Tuesday. In the future, however, a licensed Sky device will be required to receive Sky. A spokesman for the company said: "Affected customers who have previously used a third-party receiver have already been notified directly. We offer you a current Sky Q Receiver free of charge for rent. Customers who receive Sky through a CI+ module have the option to continue using this."