SkyMax chat

[tomix]

slt..et merci à toi..
juste une petite question :
Toi qui connait le Skymax..dis moi stp...g besoin de la méthode pour activer l'emu d'1 déco "newstrong".. on m'a dit que C l'équivalent de :
NewStrong=Corrus=Skymax7000..

alors dans ce cas mon ami si t'a une ID ou des infos...alors aides moi à débloquer ce déco...

Merci....et bonnes fêtes...

[odilae]

Bonjour :
Je SUIS ESPAGNOL
1º Heureux Festivités
2º comme on modifie les keys de CABOTV, dans le firmware du SX 771 ST CHANTIER.
3º est deco est un clone d'AXIL ADC 730 CHANTIER.


Salu2222222

[peter21476]

Hello to everybody , i have a problem with the skymax receiver,
i am trying to upgrade the receiver via rs232 cable but always i am getting the message "no answer",i put the receiver in the stand-by mode and then i open the "receiver link" programme,with the same cable i am upgrading other receivers,that means that the cable is ok.
But what i am doing wrong and always getting the message "no answer"???

[Morfifi2001]

Hello,
First of all to put the demonstration in Stand By (posting of the hour alone) to connect the cable series with the PC and the Demonstration. Catches Db9 Malle/Female the stitching of same cabled as follows 2-2, 3-3 and to the 5-5 Open the program Receiver link 1.2 which will be useful to us sent the firm in the demonstration. Thus after checking the Port COM if `' connect OK' ' or if `' No answer' ' While clicking on small port a positive answer must be turned over to us if all is operational before sends program. If connect ok to click on sending programme. and again No answer one needs either verify your cable or the port COM rs232 of your PC which is necessary to reverify on COM 1 or com2 it is possible that he a out himself.
Courage gratings
Morfifi2001

[ismael1979]

bonjour tt le monde!
g un probléme avec mon deco, après avoir mis le firm pour le skymax j'arrive pas avoir les d+ et les cabo tv marchent pendant 5 min et après plus rien qq'un c pkoi?
merci

[KarelSova]

Thank you very much for work,
this is useful firmware!


I have problem only with Czech chars in EPG.
Can You corect it?
Can I Help You with this works?


Another small problem is: When I upload channel to reciever I lost all stored satelite position. I must manualy stored all sat -position. I using Disecq1.2 with SG2100.

Thank You. Good work!

K.S.

[weldmaraval]

Doyou have an idea why this bin don't work for dishnetwork and nimiq satellites. I change it to NTSC from PAL and no result.

Thanks

[pavelb]

Please a new firmware to polsat

[slugworth]

Doyou have an idea why this bin don't work for dishnetwork and nimiq satellites. I change it to NTSC from PAL and no result.

Thanks

It doesn't have the nimiq rsa key embedded, only dishnetwork and D+.
Theoretically it should work with dishnetwork with the correct provider
0101 idea keys, but I don't have that receiver so I can't test the theory.

[pavelb]

fake!