Matrix Reloaded Cam.

[Sat-TV]

MRCrypt Revival
Themes Pack01

Date: 09/04/2005

Include
-------
GnomeGrey
Gold
MP10
OneOrange
XPSilver

Install
-------
1/-Unzip file
2/-Copy all folders in MRThemes Directory
3/-Launch software
4/-Select "Settings->Themes"
Load new Theme

Enjoy,

[Japi]

I try program matrix my laptop an somethings go wrong!
How i can reset my matrix realoaded cam?

[Sat-TV]

MRCrypt Revival 1.03
Themes Pack03
Date: 13/04/2005

Include
-------
Marble
OneBlue
RealOne
SportsBlue
SportsCyan


Install
-------
1/-Unzip file
2/-Copy all folders in MRThemes Directory
3/-Launch software
4/-Select "Settings->Themes"
Load new Theme


NOTA: For older version rename SUI File to MRCrypt.sui

Missed pack02 but if I find it i'll post it here..

[lazreg68]

who new for cam matrix (h/w:1.5.....s/w:mrv2.19)
tps////taquilla///cabo.............:p

[madisa]

Have you polsat with this one ?

[lezwez]

:confused:

hello i would like a little help please if anybody would know about this i have come across this b4 and had some problem i have just been playing about with this for a bit there are 2 files one bin one upd i allways put the bin on the cam i have had no problem with this very nice work :D now the upd allows you to work on the cam as well what i dont know if it overwrites the bin files im not sure at all same thing i have come across some mr files with fun 5 fun 6 so on i have come across this file spliter which turns the upd into hex and programed it on the eeprom of a fun 5 which i dont understand what the upd file is for is it for extra channels or if you have trouble programing the cam with the bin and have to load 4 files on seperate cards to get the cam working. Please i would really apreciate the help .

thank you;)

[lezwez]

that is very nice to know as this has been bugging me for some time now i apreciate the help thank you :D

[Trinity]

UPDATE MATRIX RELOADED(REVOLUTION), USING FUNCARDS ( FUN ):


There are two other methods to arrive with other procedure the same effect (with CAS2 ans with a laptop via PCMCIA-Slot).

Here i want to explain and engage, how programing Matrix Reloaded ( MR ) for dummies, with FUN-Card.

The best it goes with fun5 cards, e.g. Galaxy3 cards.
You'll need 3 of them, or with one it works also, you only have to reprogram it.
Get yourself the zip file with the MR funcardfiles (lets say the current MR version = 1.XX)
When you open the zip you'll find several files, unzip them all to a Map
(make a new one, you can find easily later on) In my case I'll call it MR funcardfiles.
........................................ ........................................ ......................
NOTE: Fun cards have different size memory in side.
Fun Card 1 = 16
Fun Card 2 = 64
Fun Card 3 = 128
Fun Card 4 = 256
Fun Card 5 = 512
Fun Card 6 = 1024
As you can see the MR1.XX_1024 file will not fit into a Funcard5.
You need to download the required updated firmware split to fit into three Funcards5 in your case.
Each file will be 512 or less.
Look for another zip file with funcard 5 files in it or download the latest file splitter program "MRFS"***
and generate your own card files.
Use the correct files for YOUR funcards and mind that if you use funcard 6 but you only have fun5 files
set the software of your programmer to 512 and not to 1024!
Do not use the auto detect function if your programmer has it.
SET THE SECTIONS MANUALLY AT ALL TIMES, especially with infinity programmers.
(NOTE: my new Infinity Phoenix doesn't have any problems of this kind).
The internal eeprom should be unticked and unused.

****MRFS (Matrix Reload Funcard Splitter) will split .upd files into any size.
See the explanation somewhere in this guide.
........................................ ........................................ .........................

In this [MR funcardfiles] map you now see 3 files "fun 5" and 2 if you use "fun6".
NOTE: They are called something like ~1.hex, ~2.hex. You need them one by one.
You also need a loader file, in most cases that stays the same over the month'.

Put you're funcard in the programmer, like Mastera, Infinity, Mastercard etc. and FULLY erase it.

Open the program you normally use to write files on a fun card.

NOTE: Some people say Chip Cat will not work.

Erase the fun card.
NOTE: not erasing will cause unreliable MR functioning but anyhow the cards need to be perfectly
burned and some fun cards just not want to, or only at the second trial they work.
Check the software program for ignore FF setting in the configuration.
Also check the memory size the program is burning in, according to the fun cards you're using.

Be sure that you ersase the fun cards and load the same loader flash (toecutter loader) on every funcard.

Load the flash file (the loader file from the map [MR funcardfiles] -> fun5) in the flash section.
Load the file mr1.~~1.hex in the external eeprom section en write the card.

Go to the setup of your receiver and open the section where the Common Interface module is.

1- Open the MR section and go to Download section.
(Can't describe the real name, 'cause that's depending from your receiver)
2- The messages "Erasing old data, please wait..." and "Insert card 1 or serial dummy card" will be shown.
3- Insert the first smart card and press Ok.
4- The message "Card inserted, opening" is shown, and after that "Performing smart card download..." and wait until
5- the message "Download card completed" appears take the card out and press "Please, extract it"
6- After that, a message "Insert card 2" will be shown.

Follow the options as above until the last card has finished downloading
using the eeprom file MR~~2.hex for card number 2 and MR~~3.hex for card number 3. (with fun6 only two files, of course!).

7.- After the last smart card is downloaded, the message "Download complete.
Copying image and re-booting" will be shown.

Just wait a few moments.

If the new version of software is not shown after about 1 minute, re-insert
the module without any smart card.
When this also doesn't work, completely shut off the receiver once.

NOTE: If you're zapping the first time, do not insert any card.
If some decoded channels could be watched, it works fine.

If one of the Fun cards isn't directly detected, please try inserting this card some time, or rewrite it!
Don't panic!

Regards and luck
TRINITY

[Sat-TV]

mr1170 TPS FIX, 13-05-2005

Enjoy

[petrit]

Thank you very much