Octagon Firmwares

[sami.sami]

01.12.2009

Oficial Firmware Octagon SF1018 HD ALLIANCE

Ins Hauptverzeichnis (USB Stick) entpacken.


New OSD Languages & corrects various translations
CAM module message information problem eliminated
Search mode, improving on Astra 28 E - ITV HD
New OSD Features:
- Menu - Configuration - Language
- Menu - Configuration - Recording Option
- Menu - Configuration - Otherwise. Preferences
- Menu - System - Storage
- Menu - Installation - System Restore
- Menu - Other - CAS
VFD display driver update
Wireless WLAN optimized function
RECALL function last
ICONS built-in playback mode for various file
Both CONAX card use
Uptake via LAN Network
EPG + timer recordings expanded and improved
Recordings with the same name are not deleted / overwritten


Official Firmware Octagon SF1018 HD ALLIANCE

[sami.sami]

08.12.2009

Original Firmware Octagon SF1018 HD ALLIANCE

Ins Hauptverzeichnis (USB Stick) entpacken.

* OSD Oberfläche & Inhalte vergrössert
* Datei Kopierfunktion :
* SATA - USB
* USB - SATA
* USB - USB
* TimeShift Manuell wählbar
* HDD Power Management (aktiv nach 10 min.)
* HDD (SATA & USB) Ein und ausschaltbar Funktion im Standby Power Mode
* Volume Kontrolle je Sender (Gelbe Taste)
* Volue Kontrolle im EPG und Senderliste (Vol +- Tasten)
* Speicherung von 5 EPG Suchwörtern
* OSD Schriftart vom Benutzer änderbar
* root/var/font
* Menu : Spracheinstellungen
* CI Cam Modul Info abschaltbar (CAS Menu)
* SPDIF Dolby Ausgang Ein & ausschaltbar (A/V Menu)
* Div. Fehler beseitigt



&


Emu version

OCTAGON_SF1018_HD_ALLIANCE_V10781__08_12 _09

Changes :

- OSD Menu + Fonts enhanced
- File (device) Copy function add.
--> Playback Mode : Blue Button - File Option : Copy
--> SATA - USB, USB - SATA, USB - USB
- Storage (HDD) Device Sleep function add.
--> If the STB is not used for 10 min, the STB will go to sleep mode (SATA & USB)
- TimeShift Manual Start function add.
--> Menu - Configuration - Recording Option : TimeShift Start - auto, manual, off
- OSD Menu fonts can change with User Font
--> Built font folder in root/var font ordner (Fonts cna copy in this folder)
--> Menu - Configuration - Language Setting : USer Font File - (select font - TTF)
- Standby Power Mode for HDD add. (SATA & USB)
--> Menu - Configuration - A/V Output : Standby Power - Press OK Button
--> Main Power (Standby) : ON/OFF
--> HDD (SATA) Power : ON/OFF
--> USB Power : ON/OFF
--> HDD (SATA & USB) availability in Standby
- Volume offset setting for each service add.
--> Press Audio (Yellow) Button : Sound Level - Low -30%, normal, High -30%, Off
- EPG search history text (Last 5 texts) EPG - Yellow Button
- Using Vol -+ Buttons (Volume control) in EPG and CH.List (Service List)
- SPDIF Dolby new default Menu
--> Menu - Configuration - A/V Output : Dolby Digital Default - ON/OFF (SPDIF)
- KeyManager (BISS) add. : Menu and Enter PIn 8282
- Sace Key Data of USB Stick / HDD
--> Menu - System Settings - Data Transfer : Save Key Data to USB
- ORF problem fix. (Astra19,2E)
- Volume Bar colour change
- Info Bar : Icons change, add. Time Clock Weekday, Signal Bar size reduce
- IN Playback Mode colour, Style and OSD Design adjustment
- Signal bug fix (HD -SD, tuner1 error)
- Info Bar EPG ticker bug fix.
- ITV Edit & Recording bug fix.
- Database bug (Setups) and bug in CH.List Manager fix.
- Netzwerk Mount. bug fix.
- Div. bugs in Playback Mode fix.
- CI Cam Module Message On/Off managed by option
--> Menu - Tools - CAS Menu : CI Message - ON/OFF


OCTAGON_SF1018_HD_ALLIANCE_V10781__08_12 _09

[dreamer1983]

!!!!Incubuscamd Client for Octagon SF1018 Alliance!!!!

!!!! Important!!!!
Upgrading from V0.92 is essential to replace ALL files except incubusCamd.conf

Instructions:

1. Make a connection to the receiver through an ftp client (f.e. FileZila, Samba) (User: root, no password)

2. Upload the files in the appropriate folders !

The files /var/bin/incubusCamd.sh4 and /var/etc/start.sh have to own the rights 755 ! (chmod755)

3. Now you have to edit the file /var/keys/incubusCamd.conf !

Please enter your CCam server there !
You can enter unlimited lines !
(Just the CCam Server (2.1.2) is tested until now, other softcam server will follow soon.

4. The box should be rebooted now.

With the key sequence --> menu-->red => you can start the Camd through the remote control
With the key sequence --> menu-->blue => you can stop the Camd through the remote control

Because of unknown reasons it can happen, that on some HD channels just the audio is encrypted and that there is no picture.

In that case you can help yourself by switching the language with the yellow button!!


!!!!!IMPORTANT!!!!!!

By now you can install and run only one softcam on the box !!!
If you have installed more cams, you have to change only /var/etc/start.sh

The remaining files don’t have to be deleted each time.

Changelog:
incubusCamd.sh4 V0.94
Renewal of incubusCamd.prio --> faster Switching
Renewal of start.sh --> Directory /var/run must no longer be created!!

Incubuscamd adapted to octagon SF1018 Aliance by Boxcracker and CTHT

[sami.sami]

V10781 EMU SW NEU : OCTAGON_SF1008_HD_INTELLIGENCE_V10781__0 8_12_09

ENGLISH :

Readme_OCTAGON_SF1008_HD_INTELLIGENCE_V1 0781__08_12_09

for Octagon HD SF 1008 HDTV - INTELLIGENCE :

Changes :



Online SW upgrade : oud.gmc.to


IMPORTANT : Advice for Software and Setting Update

Please save/copy Swoftware & Setting files in MAIN Directory from your USB Stick !


Please make after SW update Factory Reset (System Recovery) !


SmartCard Activate :

Pls. Press Menü --> Utilities --> CAS --> OK Button --> Enter PIN 1008
--> SmartCard ON/OFF

KeyManager Aktivate --> Menu + Enter PIN 8282

CAM Start/Stop :
--> Start : Menu + Red Button
--> Stop : Menu + Blue Button


Storage Setup`s (Save/Store to STB) :
Menu --> Installation --> System Recovery --> Press OK Button :
--> System restore to stored Position (recover/restore Backup)
--> Store System Data (Backup Store)


Storage Setup`s to USB Stick/Storage :
Menu --> System Tools --> Data Transfer --> Press OK Button :
--> Transfer All System Data to USB Storage
--> Transfer Service Data to USB Storage (Channel list)
--> Data Download from USB Storage


Sky Premiere Portal (Multifeed) - Taste --> Blue Button

Master Password : 1008

Connection STB to PC :
- Connect STB with LAN Cable to PC
- Menu --> Installation --> Netzwork Settings --> change DHCP off and ON
--> Pls. wait until your IP nummer showing
--> Workstation in PC --> In Address Bar \\ (flashx2) give \\IP number and Press ENTER
--> You can see : Root (LINUX) & Storage (Speicher SATA HDD + USB1 + USB2) !
--> Also can use Samba and FileZila Program !


OCTAGON_SF1008_HD_INTELLIGENCE_V10781__0 8_12_09

[sami.sami]

OCTAGON_HD_SF918_EMU_AU_PVR_USB_eSATA_V1 0690__18_12_09_HDTV

ENGLISH :

Readme_Version_18-12-09_EMU_AU_V10690

for Octagon HD SF 918 HDTV :

Changes :

- SCT (Porno-Erotik) AU EMU fix. (Via2.6) Hotbird 13E, TP 11727 V , enjoy
- Teletext improved
- MCAS SamrtCard reader improved
- Mirantenna Irdeto Card activation fix.
- Nagra2_3 fix.
- BISS adjustment
- The character of the file name is broken in case the Recorded files
--> Special Character
- Russian OSD Menu imporved
- EPG improved
- Standby Clock Time bug fix.
- Minor SW bugs fix.
- WLAN Zigbee OSD Menu :
--> Menu - Module - CAS - ComPort - Homeshare : Zigbee extern, Zigbee intern, RS232
--> Channel 1~16
Advice :
- Display bright Status : Menu - Module - CAS Menu - RS232 Com Port - NONE
- Display dark Status : Menu - Module - CAS Menu - RS232 Com Port - Gbox, Homeshare, HSIC, Xcrypt
- CCcam New Function : Server Request
--> Old Remote Control : X+ Button
--> New Remote Control : Green Button
- AU update still works


Please make factory settings after SW update.


EMU and other CAS Setup`s :

Pls. press Menü --> Modules --> RED Button --> Enter 9999
--> CAS menu for EMU and other CAS Setup`s
--> EMU Key for Enter Key and Keyreset (Reset) with Yellow Button

Memory Setup`s :
Menu --> STB Status --> Memory Setup --> Options : Memory Backup and Memory Restore

Update : File --> OCTAGON_HD_SF918_EMU_AU_PVR_USB_eSATA_V1 0690__18_12_09_HDTV.bin --> Pls. copy of USB Stick and update STB !

Programm list & Setups save direct to USB Stick :
--> USB Stick connect to STB,Go Menu - USB Menu --> press INFO Button, Program list + setups save direct to USB Stick


Premiere Portal (Multifeed) - Button --> OPT+ or also AV+

Master Password : 0918
Teletext Parental Lock, Password : 0918

- Advise : For new generation remote Control 2 Buttons changed
--> old Remote control : Fine-Tune and X+ Button
--> new Remote control : Fine Tune with Red Button, X+ with Green Button

- Channel hide/skip (HIDE) aktivate/deaktivate Button change
--> Pls. press OK button to Ch.List - now with REC Button can aktivate/deaktivate HIDE channels
--> Password : 9999


Ethernet LAN / RS232 : CCcam, NewCamd, Gbox, Homeshare, HSIC, Xcrypt, SSSP, Free (X-Box) etc.

CCcam FAQ : (NEW RCU) Book-Mark Button for CCcam Reconnection !

enjoy

OCTAGON_HD_SF918_EMU_AU_PVR_USB_eSATA_V1 0690__18_12_09_HDTV

[sami.sami]

OCTAGON_SF1018_HD_ALLIANCE_V10783__18_12 _09

Emu version

ENGLISH :

Readme_OCTAGON_SF1018_HD_ALLIANCE_V10783 __18_12_09

for Octagon HD SF 1018 HDTV - ALLIANCE :

Changes :

- In Standby mode, After stopping Recording,and Power-On again, there will be "No signal" ==> fix.
- MPEG-4 CAM Modul Support add.
- Fast Scan is not working because of PID Filter setting wrong
- YC Output bug fix.
- CI CAM Modul zapping speed improved
- If HD resolution is 576P, the condition display through SCART Output
- If 1080i Stream, in the Service List, the PIP range problem fix.
- Changed RECALL Button function
--> one time - Recall List
--> press again - Recall --> jump to last CH View
- In Play List, Listing up the contents without sorting capital letter
- Playfilelist ui breaking bug fix.
- PayTv Symbol (Icon) in CH List add. (left)
- Marked Channels in CH List new colour (scope white)
- Div. Translations misstakes fix. (Div.Languages)

OCTAGON_SF1018_HD_ALLIANCE_V10783__18_12 _09

[sami.sami]

OCTAGON_SF1008_HD_INTELLIGENCE_V10783__1 8_12_09

ENGLISH :

Readme_OCTAGON_SF1008_HD_INTELLIGENCE_V1 0783__18_12_09

for Octagon HD SF 1008 HDTV - INTELLIGENCE :

Changes :

- In Standby mode, After stopping Recording,and Power-On again, there will be "No signal" ==> fix.
- MPEG-4 CAM Modul Support add.
- Fast Scan is not working because of PID Filter setting wrong
- YC Output bug fix.
- CI CAM Modul zapping speed improved
- If HD resolution is 576P, the condition display through YUV/Cinch Output
- If 1080i Stream, in the Service List, the PIP range problem fix.
- Changed RECALL Button function
--> one time - Recall List
--> press again - Recall --> jump to last CH View
- In Play List, Listing up the contents without sorting capital letter
- Playfilelist ui breaking bug fix.
- PayTv Symbol (Icon) in CH List add. (left)
- Marked Channels in CH List new colour (scope white)
- Div. Translations misstakes fix. (Div.Languages)

Online SW upgrade : oud.gmc.to


IMPORTANT : Advice for Software and Setting Update

Please save/copy Swoftware & Setting files in MAIN Directory from your USB Stick !


Please make after SW update Factory Reset (System Recovery) !


SmartCard Activate :

Pls. Press Menü --> Utilities --> CAS --> OK Button --> Enter PIN 1008
--> SmartCard ON/OFF

KeyManager Aktivate --> Menu + Enter PIN 8282

CAM Start/Stop :
--> Start : Menu + Red Button
--> Stop : Menu + Blue Button


Storage Setup`s (Save/Store to STB) :
Menu --> Installation --> System Recovery --> Press OK Button :
--> System restore to stored Position (recover/restore Backup)
--> Store System Data (Backup Store)


Storage Setup`s to USB Stick/Storage :
Menu --> System Tools --> Data Transfer --> Press OK Button :
--> Transfer All System Data to USB Storage
--> Transfer Service Data to USB Storage (Channel list)
--> Data Download from USB Storage


Sky Premiere Portal (Multifeed) - Taste --> Blue Button

Master Password : 1008

Connection STB to PC :
- Connect STB with LAN Cable to PC
- Menu --> Installation --> Netzwork Settings --> change DHCP off and ON
--> Pls. wait until your IP nummer showing
--> Workstation in PC --> In Address Bar \\ (flashx2) give \\IP number and Press ENTER
--> You can see : Root (LINUX) & Storage (Speicher SATA HDD + USB1 + USB2) !
--> Also can use Samba and FileZila Program !


Date 18 December 2009


OCTAGON_SF1008_HD_INTELLIGENCE_V10783__1 8_12_09

[sami.sami]

ENGLISH :

Readme_OCTAGON_SF1018_HD_ALLIANCE_V1078 03 02 10

for Octagon HD SF 1018 HDTV - ALLIANCE :

Readme_OCTAGON_SF1008_HD_INTELLIGENCE_V1 0789 03 02 10

for Octagon HD SF 1008 HDTV - INTELLIGENCE :


Changes :

- Plugin Menu add. : Menu - Tools - Plugin
--> octaCAM : CCcam, Newcamd, EMU, SmartCard MCAS, KeyEdit, Keyfile support
--> Will realese next week
--> Red Button : Autostart aktivate
--> Green Button : Plugin start
- Tuner driver modified + upgraded
- Commercial skip bug fix.
- TTX Display slow deleting problem fix.
- TTX Menu 800 Display error fix.
- Volume & channel key ==> Repeat Key applied
- Unicable LNB Bug fix.
- EPG special characters in poland language not showing corectly fix.
--> Pls reboot STB after select poland language
- SAT + TP Database update : Thor 0.8W
- EPG OSD bug fix.
- Blue & Red Button bug fix. in Dish Setting für Extended Signal bar
- Recall Button OSD fix.
- FAV + SAT Button OSD fix.
- Recording monitoring in EPG OSD fix.
- MCAS driver update : SmartCard Reader
- Div. OSD Languages correcture and fix. special characters :
--> Turkish, German, Czech, Slovak, Polish, Greek, Italian


OCTAGON_SF1018_HD_ALLIANCE_V1078 03 02 10

OCTAGON_SF1008_HD_INTELLIGENCE_V10789 03 02 10

[dreamer1983]

ENGLISH:
________________________________________ ________________________________________ ______________________________

CCcam_2.1.3_Octagon_SF1018-SF1008_HD

Instructions:

1. Make a connection to the receiver through an ftp client (f.e. FileZila, Samba) (User: root, no password)

2. Upload the files in the appropriate folders !

The files /var/bin/octagon.sh40 and /var/etc/start.sh have to own the rights 755 ! (chmod755)

3. Now you have to edit the file /var/keys/CCcam.cfg !

Please enter your CCam server there !
You can enter 10 lines !

4. The box should be rebooted now.

With the key sequence --> menu-->red => you can start the Camd through the remote control
With the key sequence --> menu-->blue => you can stop the Camd through the remote control

Because of unknown reasons it can happen, that on some HD channels just the audio is encrypted and that there is no picture.

In that case you can help yourself by switching the language with the yellow button!!


!!!!!IMPORTANT!!!!!!
Pls change internal card reader OFF, menu - cas : 1018 pin
By now you can install and run only one softcam on the box !!!
If you have installed more cams, you have to change only /var/etc/start.sh

The remaining files don’t have to be deleted each time.

[dreamer1983]

OSCAM SF1018-SF1008 + + internal ReaderMit the new HD + W is now also on the OSCAM the internal reader.
However, now is the S02 card anymore. If in the next SW hopefully go again.
I have been successfully tested with ORF-ICE and HD + card. This version does not interfere OSCAM
on sci.ko but to the STSMART driver on the card. In oscam.server the setting is for:

Device = SC0 # lower card reader
Device = # SC1 Upper Cardreader

HD + functions as a client for mgcamd (via mapping CAID 1830 -> 1801 and not in conjunction with MCA and without AU) or XcamClient.

The attached version is configured for HD + (in the upper Reader) on XcamClient. The entry in the / var / etc / cardclient.conf (ie for XcamClient) should go as follows:

newcamd: localhost: 32000:0 / 1830/0000: dummy: dummy: 0102030405060708091011121314 # without AU

or

newcamd: localhost: 32000:1 / 1830/0000: dummy: dummy: 0102030405060708091011121314 # with AU

(ie only one of the two lines)

rsa and boxkey for HD + are still to be in the / var / tuxbox / config oscam.server inserted /. To find the gibts
Here:

http://octagon.gmc.to/forum/index.php?page=Thread&postID=63512 # post63512

The file / var / bin / start-OSCAM, / usr / bin / stop-OSCAM and / var/bin/oscam/oscam-0.99.4svn1476-sh4-linux must be executable,
So file permissions set to 755. About start-OSCAM you can start the OSCAM in the plugin menu, and stop-OSCAM they should again be able to stop.
It does not appear in the plugin menu in determining whether OSCAM running. After the start, it takes some time, until it is decrypted on XcamClient. About mgcamd gehts immediately.

thx ... ilchegu

!!!!Incubuscamd Client for Octagon SF1018 Alliance!!!!

!!!! Important!!!!
Upgrading from V0.92 is essential to replace ALL files except incubusCamd.conf

Instructions:

1. Make a connection to the receiver through an ftp client (f.e. FileZila, Samba) (User: root, no password)

2. Upload the files in the appropriate folders !

The files /var/bin/incubusCamd.sh4 and /var/etc/start.sh have to own the rights 755 ! (chmod755)

3. Now you have to edit the file /var/keys/incubusCamd.conf !

Please enter your CCam server there !
You can enter unlimited lines !
(Just the CCam Server (2.1.2) is tested until now, other softcam server will follow soon.

4. The box should be rebooted now.

With the key sequence --> menu-->red => you can start the Camd through the remote control
With the key sequence --> menu-->blue => you can stop the Camd through the remote control

Because of unknown reasons it can happen, that on some HD channels just the audio is encrypted and that there is no picture.

In that case you can help yourself by switching the language with the yellow button!!


!!!!!IMPORTANT!!!!!!

By now you can install and run only one softcam on the box !!!
If you have installed more cams, you have to change only /var/etc/start.sh

The remaining files don’t have to be deleted each time.

Changelog:
incubusCamd.sh4 V0.94
Renewal of incubusCamd.prio --> faster Switching
Renewal of start.sh --> Directory /var/run must no longer be created!!

Incubuscamd adapted to octagon SF1018 Aliance by Boxcracker and CTHT