## Changelog##
## r82-hellboy-V59
- hb can be downloaded and updated via ONEupdater which giving you predefined configuration with all of the profiles.
## r82-hellboy-V58
- Bugfixes
## r82-hellboy-V57
- Bugfixes
## r82-hellboy-V56
- [FIX] styling fix for SIDlist
- [FIX] fixed iptables: Index of deletion too big.
- [ENH] all tables witch are scrollable the header will stay still
- [ENH] all tables has uniform styling (no more so ugly as before)
- [ENH] added Chanel Name for sid status table on SID:PRVID:ECMLEN mouse over
- [ENH] added search and replace functionalities to editor
- [ENH] added Total NewCamd Clients and Total Rules in Failban to Info on Homepage
- [ENH] added last modify DateTime and since day:hour:minutes:seconds live counter on Editor Page
- [ENH] added of missing sort functionality on used profiles
- [ENH] added server cacheex cache mouseover label info, as new parameter { label=xxx } # max length 64
- [ENH] hostresolver changed to prevent memleaks
- [FIX] little memleak (not the hostresolver) found and fixed
- [ENH] added and fixed radegast client now you can use R lines with oscam Note: recommended only for internal use (LAN)
- [FIX] buffer overflow found and fixed
- [FIX] CS378X protocol lines fixed
- [FIX] iptables Remove all the rules starting from one point was fixed
- [ENH] by user break and or segfault of HB process will be close the connections with servers and users
- [FIX] if the new hostresolver fail, then the old one will take place
- [FIX] servers with old kernel could not read and calculate the CPU Usage Average: on home page, so removed only on older kernels
## r82-hellboy-V55
- [CLN] Removed Description Information, because of parse and user error by config file change better to remove this
- [CLN] Removed minhits and minreplies for clustercache
- [FIX] fixed total severs number on homepage
- [FIX] iptables fix to work with any kind of path
- [ENH] added sort by ECMOK on servers page and same time fixed the sort it there is containing percentage will be sorted by it
- [FIX] failban for cccam failed logins only appeared in alert and not banned, now it will ban as it should
- [ENH] search function now will show you the static content always like in newcamd clients the profile(s) to be more clear the result and where belongs to
- [ENH] SMS moved next to used profiles so you don't have to scroll to bottom to use SMS funtionality
- [ENH] if you are using GENERATERUNTIMESIDS, the table with sids can be sorted
- [ENH] added all kind of SIDs LIST and ECM info to profile details page
- [FIX] cs378x Cacheex now working with trunk version of oscam
- [FIX] nodeid now complete random or set via config by CCCAM NODEID: ! note: recommended to set your nodid in your config.
- [ENH] play(start) button for non hb removed
## r82-hellboy-V54
- [ENH] new option for FAILBAN
FAILBAN SYSTEM: 1 13 -> this means like in TELEGRAM for SYSTEM, now included only WebIF failed logins. The counter after is for occurrence threshold, until get banned
- [ENH] webif failed logins now protocoled also in debug window and like before TELEGRAM if enabled and FAILBAN and ALERT
- [ENH] FAILBAN ENABLE: 0 96 become also a threshold counter for occurrence and this will be applied for all options if set
- [ENH] Added Description information on mouseover in a tooltip popup by cache peers , server lines, cacheex server lines
EX: host port user pass # description text to show on mouse over
NOTE: you have to hit space on end of line before # and also another space after # to work properly
## r82-hellboy-V53
- [FIX] segfault caused by CACHE THRESHOLD fixed and replaced with error on log
- [FIX] buffer overflow on mgcamd and newcamd server module
- [ENH] Enhanced the Failban option like this
FAILBAN CCCAM: 1 40 (1-255)
FAILBAN MGCAMD: 1 15
FAILBAN NEWCAMD: 0
FAILBAN CACHE: 1 3
so after enable the option for failban and you want to give a limit for occurrence for Client 'xxxx' just connected, new connection closed,
simple write like upper mentioned FAILBAN NEWCAMD: 1 25 -> if 25 times occurred it will be banned.
This option available for CCCAM, MGCAMD, NEWCAMD and CACHE -> here the limit is applied for "cache: Alert! unknown peer"
- [FIX] show the correct value on page show current config by FAILBAN configuration, NOTE: here if you set FAILBAN ENABLE: 1 then all other protocols will be enabled doesn't matte if in config they are not enabled. For separate protocol(s) to enable FAIBLAN ENABLE: 0 and set 1 to witch protocol you want to enable
- [ENH] added cache and server threshold on profile configuration page overview
- [ENH] added date-time to failban in the saved rules, with string format like this (d.m.Y 24h:min) at the end of comments
## r82-hellboy-V52
- [ENH] added some missing link(s) to whois on IP Adresses on alerts Page
- [ENH] Save and restore IPTABLES Firewall rules
If you start multics.x64 -b -> then default config folder is /var/etc/multics.cfg and it will be saved the iptables rules in /var/etc/hb-rules.v4
if you start like this multics.x64 -b -C /home/test/multics.cfg then it will be saved the rules in /home/test/hb-rules.v4
And by start of Hellboy you can see in log while restoring the rules
[2020/10/15 20:45:33.490] INFO - Restoring IPTABLE rules /var/etc/hb-rules.v4
## r82-hellboy-V51
- [ENH] Show more info on Home Page
- [ENH] On Servers Page when you click to see the server usage and information was fix to be fit in one single Page like by Profiles info
- [ENH] non supported versions will be filtered with (firewall) failban iptables from Hellboy if enabled (only by cache peers)
- [FIX] when no profiles defined segfault, replaced with error message
- [FIX] default config folder was sometimes misconfigured
- [CLN] removed autoadd/audoenable from cache to prevent not wanted connections
- [CLN] removed 1841 from skip, this caid no more exists
- [ENH] added on alert page, link(s) to whois on IP Adresses
Info: for other CPU architecture, please contact us on forum!
## r82-hellboy-V50
- [FIX] Higher CPU usage when AIO fixed
- [ENH] added 1883:003311 on hardcoded skip check
- [FIX] when inside config no cache port defined or wrong cache config, then was segfault
- [FIX] Fixed on new HB version message via Telegram
- [ENH] Added aarch64 architecture
## r82-hellboy-V49
- [FIX] CS378X/CCcam connection working again with OSCAM Trunk version
- [ENH] new config parameter
HTTP ALERTS: OFF ## Show Alerts page (default: ON)
- [ENH] Cacheex become a new config parameter for Cacheex AIO Oscam
CS378X USER EXT: ## Give cacheex AIO user
CS378X SERVER EXT: ## Connect to AIO cacheex server
- [ENH] Added search on failban Page
- [ENH] On new HB version if Telegram bot is set (TELEGRAM SYSTEM: 1), you will receive a message
- [FIX] On Debug Page when new Hellboy version popup window shown up, close button was not worked, now fixed
- [CLN] cachedcw of mgcamd was not fully implemented and removed from webinterface
## r82-hellboy-V48
- [REV] reverted fix on race condition and made thread safe the DCW check, up now CPU load and DCW time like before
- [FIX] ECM HEADERWLST will now allow only with the right syntax and also fixed on show current config page
- [FIX] CS378X connection fix after reboot
## r82-hellboy-V47
- [ENH] Added channel info to debug log
- [FIX] Fixed segfault caused by .cfg read
- [ENH] Added Gen.PASS Button to Editor, this way you can insert at current position of cursor a randomly generated password
- [ENH] Added Restart confirmation to prevent accidental restarts
- [FIX] arranged stats on profile page so you don't have to scroll one more page and now also the space is better used
- [FIX] DISABLECRCCWS_ONLY_FOR like DCW crc check is fixed because of race condition UPGRADE RECOMMENDED
- [APY] F, MGUSER, CAMD35 USER, CS378X USER all limited to 200
- [FIX] Fixed debug logging, was only every 2nd line printed now it prints all
- [ENH] Added second filter input and you can change back color and the color of filtered content
- [ENH] Optimized the whole code by compiling
## r82-hellboy-V46
- [FIX] separate profiles with the same caid and provid was fixed because when header white list was set, then was the logic broken
- [FIX] all 0500 caid's had low cache hits. Now it is fixed, but you have to put on your profile(s) SID list
- [SEC] HB version control fixed
- [FIX] if you add DISABLECRCCWS_ONLY_FOR new data in your .cfg then it will add to default hardcoded list and not just what you have in your config
- [FIX] CACHE MAXPING if is set, added to "Show current Config" page
## r82-hellboy-V45
- [FIX] Editor if not fullscreen the linenumbers was broken
- [ENH] Added filtering possibility on Debug, and the whole Debug Page was rebuild for better user experience
- [SEC] Up now will be generated md5 hash for all files and added to checklist.chk to able to identify if the HB original version is
- [ENH] Added some more info to debug by checksum errors
- [ENH] New profile option SIDSSKIPEXTRACRC, with this option you can skip CRC Check for CW if there on same caid,provid also same sid but different Provider
- [ENH] Added scroll to top in Editor Show current Config Page
- [ENH] Added global option to Disable peers with high ping CACHE MAXPING: 100 # value is in milliseconds (default = 100 max 200)
- [ENH] Enable 186D Caid to set Provid (003511) in Profiles
- [ENH] Now you can create separate profiles with same caid and provid and will identify on request by sid. If there no sid could be identified then will get the last founded profile with caid and provid
## r82-hellboy-V44
- [ENH] Added to Editor page line numbers and current position, now you can better identify the errors from verbose mode and also overall view is better. The current position is same like the error show's in verbose mode
- [FIX] some HB connections was disabled by accident, this was fixed
- [LNK] by request of Admin from multics.info, added the webpage link to the first page
## r82-hellboy-V43
- [ENH] Added checksum for all NDS caid request, all failed checksum's will be flaged in Debug as "ECM Checksum Error"
- [FIX] Fix on Version blocking
- [SEC] all connections from HB Versions will be allowed only previous Versions, all older will be blocked
## r82-hellboy-V42
- [FIX] fix all segfault's caused on client - server details page view
## r82-hellboy-V41
- [ENH] to get rid of all stupid ECM requests, there is a new option introduced. ECM HEADERWLST: 0102030405,0102030406 and this way we can filter ECM requests with wrong header. This options should (must) be set on all profiles
- [ENH] added new field to Profiles on WEBIF to show how many ECM LENGTH and ECM HEADER was blocked
- [ENH] added ecm length to see in Debug log window if decode failed
- [FIX] pages refresh was fix by focused inputs and mousever events, removed not to refresh the whole page when it's not needed
- [FIX] fixed issue on index page what caused segfault when accessed the home page
## r82-hellboy-V40
- [FIX] With the new parameter SIDSWCRC you can now use DISABLEGERMANPATCH: NO, better not to disable, on client side neeed skip for all to work
- [ENH] SMS messege will be sent to Telegram if you have TELEGRAM enabled in your config, SMS size max 700 Chars
- [CLN] Expiredate removed ! this is a hobby
- [SEC] SMS send and receive message sanitized
- [ENH] Added new options for TELEGRAM module: Default option is to send you a message on every HB start so this no need param :)
TELEGRAM CCCAM: 1 - this will send you messages from CCcam
TELEGRAM CACHE: 1 - sale as the first one just for Cache ans so on till system
TELEGRAM MGCAMD: 1
TELEGRAM CS378X: 1
TELEGRAM NEWCAMD: 1
TELEGRAM CAMD35: 1
TELEGRAM SYSTEM: 1 - by this option you will get the message if someone tried to login to your webif but invalid credentials and also the SMS send
Note: all line options except system, are only active if you have also the firewall (FAILBAN) active, because it would be too much messages and if a user would get banned trought FAILBAN then it comes only once.
## r82-hellboy-V39
- [ENH] New option SIDSWCRC, where you can add your SID'(s) list for those Profile'(s) where DISABLECRCCWS enabled but some of SID'(s) need CRCCheck like 48Bit by 09C4 and maybe other Provider'(s) as well, for syntax please read the multics.cfg inclulded in archive
- [APY] F, MGUSER, CAMD35 USER, CS378X USER all limited to 400, this is a hobby. All Cacheex capable users limited to how many normal and or cacheex setup you have Ex: 200 CS378X normal user - then you able to set 200 CS378X cacheex user till you reach the limit of 400 total
## r82-hellboy-V38
- [FIX] CAMD35 is fixed, here the users if they are inactive 90 seconds they appear like offline because Camd35 is UDP so there's no connection
- [ENH] If there a newer version of HB then it will popup a message (For your Info - There is a newer version of HB, please update for better compatibility.) on every page visit, in this case editor and restart menu will be disabled as well
r82-hellboy-V37
- [FIX] Polaris fix, now you able to set POVID in Profile fort this CAID: 4AEE since the provider changed to 000001
- [ENH] you should now have better times on client side on every provider ex: 09C4 now between 110-130ms
## r82-hellboy-V36
- [FIX] CS378X fixed, now working LG Cacheex from OSCAM ( here must be some more functionalities to Implement, because only can to connect and if LG active then no hits ) and CS378X Normal lines working again
- [ENH] Added sort to all important Fields like in: Cache ( HOST, IP, ADDRESS, PING, REQUESTS, REPLIES, SENT REQ, SENT REP, CACHE HITS, INSTANT HITS ) and on Profiles ( TOTALECM, ACCEPTEDECM, ECM OK ) and at least in CacheEX ( HITS, INSTANT HITS ). If you are with mouse over these Tables the update is working only on ROW where the mouse over situated, if you move the mouse out of table the refresh comes back like normal. For sort you have to click on these Fields from table, every click change the sort order Descending then Ascending
r82-hellboy-V35
- [FIX] SMS box on cache page size overflow fixed
- [ENH] Hellboy up v35, MultiCS Cache will be accepted only from Hellboy v35 and up
- [ENH] Hellboy will block Cache from fake HB Versions
- [FIX] 0500 and some other caid's where not get cache hits is fixed
- [RET] Cacheex is back, because HBv35 tested to pull and push cacheex to oscam and MultiCS push only local generated clean CW's with no errors on oscam side
- [APY] Limit the F line number to 500, this is a hobby and we need to fight against PAYSERVERS, and HB was never PAYSERVER FUN and never supported PAYs!
- [UPD] DISABLECRCCWS_ONLY_FOR = 0500:030B00,032830,050F00;098C:000000;09 8D:000000;09C4:000000;1884:000000;1708:0 00000;1709:000000;1841:000000;1811:00331 1;0E00:000000 is hardcoded and tested by VFL and other members
- [ENH] CCcam will be allowed only (original, oscam and HB v35), all other will be blocked
- [ENH] Mgcamd and Newcamd servers will be blocked all versions and only (HB up v35 and oscam)will be allowed
## Changelog## r82-hellboy-V34
- [FIX] If there someone not use the right new syntax for DISABLECRCCWS_ONLY_FOR: , the server won't start.
- [FIX] Show current Config ============ DISABLECRCCWS ============= will show the right values now.
- [FIX] If there is no DISABLECRCCWS option defined in config then it will take palce a default hardcoded list with these caids 098C:000000, 09C4:000000, 098D:000000, 1811:003311, 1811:023311, 1811:003315, 1811:003341, 1811:00331B, 1811:000007, 1811:000107, 0500:030B00, 0500:050F00, 1817:00006A, 1818:00006C, 1818:000007, 1819:00006D, 1819:000007, 0E00:000000, 1884:000000, 1708:000000, 1709:000000, 1841:000000
- [CLN] removed complete cacheex module not to have problems with oscam.
## r82-hellboy-V33
- [FIX] added 1801 to able to set provid
- [ENH] you can now exclude from crccwcheck with DISABLECRCCWS_ONLY_FOR: 0500:030B00,032830,043800,043820,050F00 (same syntax like oscam caid:provider,provider;caid;caid), to show the REMOTE DISABLED CWC CAIDS in correct format with provid and caid UPDATE RECOMENDED.
- [FIX] 1708,1709 half nulled DCW fix for lines
- [FIX] 1708,1709 for cache lines too, please don't forget to skip checksum test for this caid
- [CLN] Removed the club link because no more online support
- [FIX] all input field's like <select text input textarea> the whole page by refresh will not be updated till they on focus
- [ENH] added favicon to webif so no more error in console of browser because of missing
- [ENH] added search funtion to all the Pages where could be useful
- [FIX] Fix the username and password for cacheex now it can contains #$%^& and other chars as well ( please read the multics.cfg file for more Info )
- [ENH] if you move your mouse over the Debug Log Window, the Update of Log will stop, until you move your mouse out of Log area (like in Oscam)
- [FIX] cs378x keepalive fixed CS378X KEEPALIVE: YES after port
## r82-hellboy-V32
- [ENH] Show CPU usage average for multics process in index page (using ps -p <PID> -o %cpu)
- [ENH] Show different colors for last used share depending on where did the CW came from:
CW from CACHE -> "#0d98ba"; // blue-green
CW from SERVER -> "#3300aa"; // blue special
CW from NEWCAMD/MGCAMD CLIENT -> "#ffae42"; // yellow-orange
CW from CACHEEX -> "#9acd32"; // yellow-green
- [ENH] Add hyperlink to IP information for remote clients and servers. The hyperlink is on the IP address string. The change is added in the following pages:
+ Cache
+ Cacheex
+ Servers: it means also separating hosts and IP address in two different columns so that each of them have their own link (to server detail page and to ip information respectively)
+ Newcamd
+ Mgcamd
+ Cs378x
+ Camd35
+ Cccam
## r82-hellboy-V31
- [ENH] Compute the worst profiles in three cases: worst profile in cache, worst profile in cacheex and worst profile in servers (
https://multics.club/index.php?threa...-exchange.261/)
- [FIX] Fixed SMS Message from cache page, will not refresh the content till you focused in textbox (beware: if you focus out and you wrote a big text it will be deleted so stay focused till you send the message). (
https://multics.club/index.php?threa...e-message.276/)
- [ENH] Show link to whatismyipaddress.com in failban page for source addresses in case there's no ip2country file configured in multics.
- [SEC] Don't send referrer to whatismyipaddress.com when clicking on links to that site (security)
- [SEC] Don't send referrer to when clicking on link to mutics.club site in index page (security)
- [FIX] Solve BUS ERROR message on arm-dream binary (
https://multics.club/index.php?threa...n-arm-cpu.288/)
## r82-hellboy-V30
- [FIX] Solved BIG memory leak in web interface (upgrade recommended)
- [FIX] Show correct CACHE TIMEOUT of each profile in the show config page
- [ENH] Add country flags to source ip address on failban page. Source ip address is now clickable and you can go to
https://whatismyipaddress.com directly to get more information on that IP
- [ENH] Add button to close all open alerts
- [ENH] Generate alerts for more situations related to bad authentication of users when it's available for the specific cs protocol:
* Good username but bad password
* Multiple connections, with indication of the following cases:
+ Multiple connections in more that 60 seconds (Already connected)
+ Multiple connections in less that 60 seconds (Just connected)
+ Multiple connections from different IP
* This information was already in the logs of multics. We are only adding it to alerts so people that never look logs can take care of it.
- [ENH] New feature to add cccam and mgcamd users from web interface. To enable it modify the INCLUDE of the file that will hold the new users like the following:
// File that will hold the users
INCLUDE: "/var/etc/users.cfg", USERFILE
New users will be added at the end of the defined USERFILE.
Only one USERFILE definition can be used.
Once enabled the web interface will show a new form in the CCCAM and MGCAMD pages to allow adding new users.
Only username and password, no more is included in the web interface. If you need to add other things to the users you use the normal editor.
- [ENH] Allow disable/enable cacheex clients and servers from cacheex page on web interface
- [ENH] Include HTTPALLOWEDIP and HTTPALLOWEDHOST parameters in configuration to restrict http web interface access to specific sources.
* All sources not included here will not have access to http web interface.
* If none of this new parameters HTTPALLOWEDIP and HTTPALLOWEDHOST is defined source access control will be disabled.
* HTTPALLOWEDIP will hold a comma separated list of IP addresses or IP ranges like in these examples:
HTTPALLOWEDIP: 127.127.127.127, 127.0.0.1-127.0.0.255
HTTPALLOWEDIP: 0.0.0.0-255.255.255.255 ### This would be equivalent to disabling access control
* HTTPALLOWEDHOST will hold a comma separated list of hostnames. Your server SHOULD be able to DNS resolve those hostnames.
* There's a proccess inside multics that tries resolve those hostnames at certain intervals, but it's not running continuosly. So when multics starts allow sometime (at least one minute) for this process to execute and when the DNS is updated (dynamic DNS) allow also at least one minute too plus the DNS propagation time that is out of multics control.
* Example of HTTPALLOWEDHOST:
HTTPALLOWEDHOST: yourwork.no-ip.org, yourhouse.no-ip.org
* Note that there's no single (') or double (") quotes for hostnames and for IP address. You'll get an error if you use them.
* Note that spaces are not allowed inside IP ranges
- [ENH] Include NOIPFAILBAN and NOHOSTFAILBAN parameters in configuration to allow specifiying sources that won't be included in failban.
* If none of this new parameters NOIPFAILBAN and NOHOSTFAILBAN there will be no exceptions for failban.
* 127.0.0.1 ip address will be added if not included in the configuration.
* Syntax is equivalent to HTTPALLOWEDIP and HTTPALLOWEDHOST.
## r82-hellboy-V29
- [FIX] Solve possible crash condition when updating SID statistics
- [FIX] Make autorefresh work in profile page
- [ENH] Add options "SHARE CCCAM", "SHARE MGCAMD" and "SHARE NEWCAMD" to profile page
- [FIX] Remove option TIMEPERECM as it's not well implemented and can cause problems
- [ENH] Implement connection timeout to remote servers, instead of relying on linux timeouts. This will reduce configuration changes reload times that have to wait until current connections are established or timed-out (linux connect timeouts are typically arround 3 minutes, in multics we have reduced to 5 seconds).
- [ENH] Add logging for reread configuration in loglevels INFO and DEBUG for troubleshooting purpose
- [ENH] Allow changing runtime loglevel from webinterface (debug page). Things to consider:
* You will be able to change the loglevel at runtime from web interface, but the change will not persist between restarts.
* Also, once you change loglevel from web interface it will not be altered if you modify the configuration file. The change from web interface takes precedence over the change from config file, until you restart multics.
* It affects all logging, not only the logs currently shown in webinterface. So if you change loglevel to LOGTRACE and have file logging in /var/tmp consider you are changing the loglevel of all multics, not just the loglevel of what is shown in the webinterface (your log file will grow!!!!)
- [ENH] Implement alert module that will show a alert list in the web interface.
Alert conditions:
- String with alert message
- Simple checksum of the string (to be able to increment the alert count and not to duplicate the alert)
- Initial time and date the alert raised
- Last time the alert raised
- Alert count
- Alert status (open/closed): the admin can close alert
Things that could trigger alert:
- Authentication failed to any cs protocol (ccam, newcamd, mgcamd, etc) in local server with indication if the access triggered failban also
- Cache access not authorized (not in my cache peers)
- Authentication failed to http web interface
Things to consider:
- This is a simple list of alerts triggered from the core logic of multics, not complex rules to generate alerts
- There will be no correlation of alerts with this design that is a simple string with alert message.
- Alerts will not persist between multics restarts
## r82-hellboy-V28
- [ENH] Add filter by MGCAMD, CAMD35 or CS378X in servers page
- [ENH] Redesign of cacheex page, including more statistics, instant hits, profiles hits, link to detailed informations of each peer... Tested with cacheex modes 2 and 3 (no tested with mode 1)
- [FIX] Solve buffer overflow in webinterface /config logic when showing a VERY LONG line
- [ENH] Add uniform data about cccam, mgcamd and newcamd clients in detail page (i.e.: mgcamd wasn't showing different IP logins but cccam was showing it...)
- [FIX] Show ECM LENGTH in hexadecimal in config page
- [FIX] Make autorefresh work in cachepeer and server pages
- [FIX] ECM filtering was not checking the same conditions for mgcamd, camd35 and cs378x as it was checking for newcamd and cccam. Make uniform checks for all protocols (ecm length, caid, provid, accepted sid, etc). Remove viacess ECM checking because it was discarding legit ECMs.
- [ENH] Generate statistics about the SIDs that are getting DCW on each cs profile and show them in the detail page of each profile. This requires CPU time so by default is not enabled. To enable it add "GENERATERUNTIMESIDS: yes" in config file
- [ENH] Improve bar diagram of profile page to better read it
- [ENH] Show hit times for each profile in tooltip table of peer on cache page
- [ENH] Show hit times for each profile in tooltip table of peer on cacheex page
- [ENH] Show hit times for each profile in cache peer page. Show instant hits of each profile.
- [ENH] Show last CAID:PROVID received from cacheex peer that was flagged "bad" (99% of times it's because you're getting cw for a CAID:PROVID not in your config)
- [ENH] Log all received cacheex messages flagged as "bad" in DEBUG loglevel
- [ENH] Multics exchanges cache with other multics and with oscam (csp protocol) without ONID. ONID is not needed in profiles now. Remove the following config options:
* ACCEPT NULL ONID
* ONID
Also for cache peers it's no effect if you add "1" or not after the port. So: "CACHE PEER: 127.0.0.1 8888 1" will do the same as "CACHE PEER: 127.0.0.1 8888"
## r82-hellboy-V27
- [ENH] Apply patch from oscam special for videoguard CAIDs to filter out bad CW. Can be disabled with DISABLEGERMANPATCH=yes in config file.
- [ENH] Intelligent cache exchange funcionallity to try to stop bad cw in cache for caids 098c and 09c4. Cache peers with Hellboy version 27 onwards will exchange information on the CAIDS they have excluded from CW crc checking with option DISABLECRCCWS_ONLY_FOR.
DISABLECRCCWS_ONLY_FOR: 0500, 098c, 09c4
It's a nonsense to exchange cache for 098c, 09c4 and 0500 with peers that don't have disabled CRC CWS for those CAIDs.
From HB 27 onwards peers will only send and accept received cache for CAIDs in the list of DISABLECRCCWS_ONLY_FOR from peers that have also put those CAIDs in the list.
Examples:
1- I have HB 27 with recommended setting of "DISABLECRCCWS_ONLY_FOR: 0500, 098c, 09c4" and I exchange with a peer that has HB 27 (o later) with the recommended "DISABLECRCCWS_ONLY_FOR: 0500, 098c, 09c4". --> All three CAIDs will be included in cache exchange with this peer. The rest of CAIDs are not affected.
2- I have HB 27 with recommended setting of "DISABLECRCCWS_ONLY_FOR: 0500, 098c, 09c4" and I exchange with a peer that has HB 27 (o later) with the setting "DISABLECRCCWS_ONLY_FOR: 098c". --> From those three CAIDs only 098c will be excanged. The rest of CAIDs are not affected.
3- I have HB 27 with recommended setting of "DISABLECRCCWS_ONLY_FOR: 0500, 098c, 09c4" and I exchange with a peer that doesn't have HB 27 (or later). You won't exchange cache for CAIDs 0500, 098c and 09c4 with that peer because it's nonsense.
If people start moving to HB 27 (or later) with recommended setting of "DISABLECRCCWS_ONLY_FOR: 0500, 098c, 09c4" we hope that the cache will start progresivly to become more filtered of crap cw and that will benefit all.
- [ENH] If no DISABLECRCCWS_ONLY_FOR setting present in config file include 0500, 098c and 09c4 as default.
- [ENH] Extend 'shares' option functionality to define not only the cache sent to other peers but also the cache accepted from other peers. Before this version the 'shares' option especified the CAID:PROVID that the cache would send to other peer. In this version it also controls the cache that we receive from the peer. Keep in mind that incoming cache doesn't have a PROVID (only CAID in the cache protocol) so for incoming cache if you add for example 0100:004106 you will receive all the cache for CAID 0100 in all providers because of that protocol limitation. It will also happen with CAID 0500 that has lots of providers. The cache sent to other peers doesn't have this limitation if it's cache generated inside your server, because in this case the provider is known.
- [ENH] New feature to show the current config that multics is using. It constructs a configuration with the right syntax from the values that are in memory. This can help:
++ To identify errors in configuration
++ To identify configuration parameters that are not used (they won't be shown)
++ To send the real configuration to other people for troubleshooting, without meaningless parameters and in a common order.
This new feature is shown in the editor page. There's an option also to donwload the configuration as a text file.
- [FIX] Give DCW failed to the client when there are no servers available to decode certain CAID instead of waiting DCW TIMEOUT
- [FIX] Mipsel binary was giving bus error
- [FIX] When oscam/csp tried to connect to an autoadd&autoenable cache it was disabled. If autoadd&autoenable is configured any peer should connect, including oscam/csp peers
- [ENH] Send telegram message notifying cache SMS received
## r82-hellboy-V26
- [ENH] Introduce a functionality to disable CRC control word checking for certain CAIDS that currently are not including any known cyclic redundancy checking capacity. To disable it just add to your configuration:
DISABLECRCCWS_ONLY_FOR: 0500, 098c, 09c4
That will disable CRC checking of control words for CAIDS 0500, 098c and 09c4
Thanks to dogcs and saintomer1866 for testing!!
- [ENH] Add action to failban page to allow removing all the rules from one point with single click
- [FIX] Allow the following syntax for SID LIST:
SID LIST:
SID LIST!:
SID LIST=
SID LIST!=
(without an space after the word LIST only the first case was working correctly)
## r82-hellboy-V25
- [FIX] Fixing the size of FAILBAN command we execute for IPTABLES and fix for 127.0.0.1 exclusion.
- [ENH] Optimized logging (less CPU usage)
- [FIX] Make autorefresh work again
- [ENH] Telegram send and iptables management will run in separate thread, so that the core of multics don't have to wait until these jobs finish
- [ENH] Show free memory in MB in webinterface. Show also total memory and cached memory if it's available
- [ENH] Global failban can be activated both with "FAILBAN: ON" or with "FAILBAN ENABLE: ON", so old config files (using syntax "FAILBAN: ON") will not need to be changed
- [FIX] Apply changes to failban configuration in the configuration files without the need to restart multics
- [FIX] Encode messages sent to telegram to allow special characters like '=', '&' and '+' that sometimes are present in profile names (failban messages to telegram where sometimes cut)
## r82-hellboy-V24
- [FIX] Excluded 127.0.0.1 from FAILBAN on ClusterCache, sometimes CSP Cache push was Banned.
- [ENH] Added posibility to FAILBAN for CCcam, MgCamd, Newcamd, ClusteCache, cs378x, Camd35 or as till yet for all together.
- [ENH] Only start TELNET thread when TELNET is enabled
- [ENH] Assign names to all threads started by multics to allow better troubleshooting
- [ENH] Read initial config from main proccess instead of reading it from the config thread (eliminates the need for sleep)
- [ENH] Added option -t to command line. With this option you can test your configuration files without fully starting multics. Before reporting any problem you should check you have no errors in your configuration files!!!
- [INTERNAL] Added /config URI to webinterface to allow changing delay connect and delay threads timers for my testing (don't publish this message!!)
## r82-hellboy-V23
- [FIX] Lower profiles will get cache hits now on servers with many profiles. Anyway be advised that the more profiles you add to multics the more processing power it takes on any multics version. No need to have America and Asia profiles if you live in Europe mate :)
- [ENH] Get full CACHE configuration including active peers to a text file by downloading from
http://HOST:PORT/cache?action=config
- [ENH] Improve error messages when reading config files. Most messages will now show line and column of the config file where the error is detected. Suggestion: launch multics with -f -v and see output if it shows any errors/warnings in your config.
- [FIX] Added omitted CCcam Server versions "2.1.4", "2.2.0", "2.2.1".
- [FIX] Fixed if non valid version of CCcam Server was set, (caused segfault). Now it will set default to 2.0.11.
## r82-hellboy-V22
- [ENH] Include list of iptables rules on webinterface, with the ability to remove any rule. To be used FAILBAN need to be enabled.
- [ENH] DNS thread improvement (code optimization)
## r82-hellboy-V21
- [ENH] Show full options of cache peer in cache peer detail page on webinterface (fwd, csp, nominhits, etc)
- [ENH] Allow access to cache peer detail page on active CSP peers (protocol=0)
- [FIX] Remove FREECCCAM server from multics (no payservers please!)
- [ENH] Reenable cache peer disabled for MINHITS after nominhits=1 is added in config file for that peer
- [ENH] Reenable cache peer disabled for MINREPLIES after nominreplies=1 is added in config file for that peer
- [FIX] Revert ACCEPT NULL CAID and ACCEPT NULL PROVIDER.
- [ENH] Show value of CACHEEX VALIDECMTIME for profiles in webinterface
- [FIX] Race condition made multics crash sometimes when removing a server from config
- [FIX] Race condition when disabling a cache peer for lowhits or lowreps made sometimes look the peer as alive in webinterface
- [CLN] Remove unused option autoadd from cache peer (not from cache, but from cache peer!!)
## r82-hellboy-V20
- [CLN] Removed some more unused parts from code.
- [ENH] Show indication that cache peer has been disabled for lowhits or lowreps in webinterface. Colors and text will change. Sorry for the colors I'm not good with that, but that's what you have
- [ENH] Ignore newcamd extended messages in newcamd ports
- [ENH] Send keepalive caching to newcamd/mgcamd servers as r81
- [FIX] FAILBAN fix if unable to use IPTABLES, more clear and added info to IPTABLES about intruders.
- [ENH] Eliminate restriction of multiple peers from same IP if auto-add is enabled. It was implemented to protect multics from multiple shit peers connecting, but now with CACHE MINHITS and CACHE MINREPLIES we have a more granular method of auto-selecting our cache peers.
- [ENH] Added option to disable cache peer if doesn't supply a minimum number of hits per hour. Hits are computed by adding Cache Hits to Instant Hits. Hits are checked every 6 hours (and remember that replies are checked every 1 hour if you enable also CACHE MINREPLIES). By default it's disabled.
Examples:
CACHE MINHITS: 0 # No effect. It will disable the check.
CACHE MINHITS: 1 # At least 1 hit per hour. So after 6 hours (when the task run for the first time) each peer should have at least 6 hits (adding Cache Hits and Instant Hits), after 12 hours (when the task runs for the second time) each peer should have at least 12 hits...
CACHE MINHITS: 10 # At least 10 hits per hour
The calculation is done considering the multics runtime, not the peer connection time which is not carried.
Once a peer is autodisabled for MINHITS or MINREPLIES cannot be reenabled (until you restart multics).
Peers not connecting to multics will be disabled by the task.
You can add an exception to certain peers with the parameter nominhits, for instance:
CACHE PEER: hostname port { nominhits=1 } # exclude this cache peer from disable
Also, if you don't like the way it's implemented you can simply continue working with multics without enabling this feature and use external scripts made by yourself if you're competent to build them. This can be implemented in many ways and for sure you would have done it better, but you haven't done it so just say thanks because somebody did something you didn't do
## r82-hellboy-V19
- [ENH] Enable or Disable FAILBAN from config.
- [ENH] Send TELEGRAM message on ban with username and ip and protocol.
- [ENH] Show cache threshold setting in cache page
- [FIX] Fixed some bugs in cache
- [ENH] Added option to disable cache peer if doesn't supply a minimum number of replies per hour.
To enable and adjust to 1000 replies per hour you have to add:
CACHE MINREPLIES: 1000
Every hour multics will check that the replies sent by each cache peer divided between the number of hours uptime of the server exceeds or equals the value setting of CACHE MINREPLIES. If it doesn't the cache peer will be disabled.
You can add an exception to certain peers with the parameter nominreplies, for instance:
CACHE PEER: hostname port { nominreplies=1 } # exclude this cache peer from disable
## r82-hellboy-V18
- [ENH] Fail logins to ban. All cache , cccam , mgcamd , newcs users with invalid credentials will be banned automatically.
## r82-hellboy-V17
- [ENH] Identify Hellboy version of the cccam servers you connect to.
## r82-hellboy-V16
- [ENH] Identify Hellboy version of the newcamd and mgcamd servers you connect to.
- [CLN] Some more Code cleanup.
## r82-hellboy-V15
- [ENH] Enable sending cache from multics to oscam (cspsendcache option)
## r82-hellboy-V14
- [ENH] Added to identify HB version in cache section
- [CLN] Removed ACCEPT NULL CAID and ACCEPT NULL PROVIDER
- [FIX] Disallow to create profiles without CAID and PROVIDERS parameter (before: without these params was able to create profiles with auto 0 as value)
## r82-hellboy-V13
- [CLN] Code cleanup.
## r82-hellboy-V12
- [ENH] Send telegram message on failed login attempt to multics web
- [ENH] Added exception for tunneled Nagra 1884,1861
## r82-hellboy-V11
- [ENH] Implemented restart command in telnet server
- [ENH] This version will identify itself as "Multics-HB r82" in the cache section of your peers. This way you can know which of your peers are using "Hellboy" :)
- [ENH] Added exception for tunneled Nagra 1862
## r82-hellboy-V10
- [ENH] Now multics can send you a Telegram message when started or restarted
- [FIX] Solve buffer overflow in logging function
- [FIX] Control null pointer in newcamd server causing segfault
- [FIX] Control null pointer in mgcamd server causing segfault
- [FIX] Added to exceptions tuneled Nagra card (1817, 1818)
## r82-Bust3D-V9
- [NEW] Added Stealth Mode for CCcam Server: Behaviour like the original CCcam.
## r82-Bust3D-V8
- [FIX] Stylesheet file check funktion fixed now works.
## r82-Bust3D-V7
- [FIX] Added to exception tuneled Nagra card 1819
## r82-Bust3D-V6
- [NEW] Added possibility to choose CCCam up to version 2.3.2 (2.0.11, 2.1.1,2.1.2, 2.1.3, 2.2.1, 2.3.0, 2.3.1, 2.3.2).
- [FIX] Small bugfixes to able to compile other architectures.
## r82-Bust3D-V5
- [FIX] Added to exception tuneled Nagra card 1814
- [FIX] Error for profiles added to log not only to stdout.
- [FIX] Error log for no config on default location or invalid config file added to log not only to stdout.
## r82-Bust3D-V4
- [FIX] If FILE STYLESHEET in multics.cfg point to non existing file then use default style.
- [FIX] PROFILE validation was broken from begining because of my mistake, but now working and tested with all possible combinations and also for tuneled Nagra cards.
## r82-Bust3D-V3
- [FIX] Added to PROFILE validation logic tuneled Nagra Cards ( 1811,1863,1883,1863,1813 )
## r82-Bust3D-V2
- [FIX] Added to PROFILE validation Bulcrypt caid
## r82-Bust3D-V1
- [FIX] Show error if config file not found instead of segfault.
- [NEW] Implemented PROFILES verification on start and show error if caid and provid combinations are invalid.
## Git version
- [NEW] SSL implementation for HTTP Server
- [ENH] Handle CSAT/TNTSAT nano e0 ECM. There's a new option in profiles called SKIPCWC (similar to oscam "disablecrccws"). Add the following to the affected profiles to activate (only to the affected profiles or it will cause problems!):
ENABLE SKIPCWC: 1
- [FIX] When adding cache peer to running multics it connects to it without need to restart.
- [FIX] ECM sent to cs378x servers where counted twice so hit percentage was showing half the real statistic in servers.
- [ENH] Allow enable/disable camd35 clients. Allow debug camd35 clients.
- [ENH] Create /camd35client URI and update links from /camd35 URI to allow access detailed camd35 client information.
- [ENH] Allow enable/disable cs378x clients. Allow debug cs378x clients.
- [ENH] Create /cs378xclient URI and update links from /cs378x URI to allow access detailed cs378x client information.
- [FIX] Add cccam build number 3367 that is the corresponding to 2.3.0
MultiCS r82-hellboy latest release
Reply With Quote
