Constant Initializing

[digibeet66]

I have the last few days the problem that my diablo cam constant starts re-initializing. Befoore it was not so bas.
Sometimes initializing, but not to often.

When i put the card in again it works again.
Sometimes after a few seconds it works automatically.

Anybody knows this problem?
I have a Topfield 5000 CI receiver.

I already tried to turn N2 AU off.

Because it happens most on Polsat/Cyfra Disny channel

[drahcirk03]

yes im getting that infrequently on prem ,prob a bug with 323,

[paolotto]

I have the last few days the problem that my diablo cam constant starts re-initializing. Befoore it was not so bas.
Sometimes initializing, but not to often.

When i put the card in again it works again.
Sometimes after a few seconds it works automatically.

Anybody knows this problem?
I have a Topfield 5000 CI receiver.

I already tried to turn N2 AU off.

Because it happens most on Polsat/Cyfra Disny channel

Hello, try this: with Cas go in Cam Disk functions and format your diablo; then upload the new Stealth 2.34, you'll find here (thanks Passete). Good luck and enjoy !

[digibeet66]

I already formatted the cam. (I always format it before a new stealth version)
And tried version 2.33 and 2.34.

Hopefully anybody know a solution.

Sometimes within seconds it comes back, other times it never comes back
(Only by putting teh card out and in again)

[paolotto]

I already formatted the cam. (I always format it before a new stealth version)
And tried version 2.33 and 2.34.

Hopefully anybody know a solution.

Sometimes within seconds it comes back, other times it never comes back
(Only by putting teh card out and in again)

Hello, in this case perhaps your Topfield don't agree with the diablocam. If possible test the diablo in another receiver and see what happen. Good luck !

[redhound]

sounds like a bad flash,here is a list.

Last updated 08-12-2006 diablo

@Metabox III Ok
@Sat NAG CI 6915 Ok

Arion 9300 Ok
Aston Xena 1700 Ok

Coship Ok
Clarke Tech HTS 2100S OK
Clarke Tech 2000 Image Freezes often becasue of CSA

Digital 4100 CI Ok
Digital 1200 M CI Ok
Dragon Box CI 600 Ok
DreamBox 7020 Ok
DreamBox 7025 Ok
DreamBox 7000 mit Gemini - Test Ok
DSR 5500 CI Ok

Edision 2600 CI - Test OK with org.FW and patched with deakti.<6040>
Evolve EVO 8800 Reality Ok
Echostar DSB-890 CCI Some OSD problems
Echostar 3000IP Ok
Echostar 3600 Ok
ECHOSTAR 5020 OK (Freez when Other Cams Are Used With Diablo)
Echostar DVR-7000 VA Works with problems freezings
Electron CI Ok only Slow Channel Switching
Eycos Digital Sat Receiver E-1000 PVR

Finepass FSR-4100 CI Ok
Force Duomaster 1030 S Ok
Force 536S-CV OK
Force Duomaster 1030 S

Galaxis Easy Rider 2.01 Cable - Test OK
GB SAT Dual - Test Ok
GB Sat 2c 10 – Test OK
Golden interstar Receiver - Test OK

HISPANIA FCIS 7000 = ok
Homecast Ok
Homecast HS 5101 CI HDTV Receiver
Hornet Ok
HU Ok
Humax IRCI 5400Z Plus Ok
Humax CI 8100 PVR Ok
Humax CI 8100 Ok
HUMAX 5100 Ok
Humax 5400 (without z) last Version - Test OK
Humax PDR 9700 - Test Ok
Humax VAC 1 - Test Ok
Humax HDCI 2000 - Test OK
Humax HD 1000 - Problems by changing channels
Humax HD 2000 works ok in only the bottom slot

ICE FC 3000 CI Ok
ID Digital CI-24 Econo - Test Ok
Igate TGS 100 ok
Inverto IDL 7000 Ok
Illusion Sat M5 Ok

Kaon KSC 570 Ok
Kaon Premium Dual PVR Ok

Lemon PCMCIA problems
Lemon 030 CI Ok

Manhattan Plaza 250 Ok
Manhatten plaza 350 - Test Ok
Manhattan Plaza ST-450 ok
Manhattan Plaza ST-550 - Test OK
Manhatten DSR 5500 old vers. – Test slow but ok
Manhattan Starlight 6800 OK
Manhattan Starlight 9800
Maxplus 2100 OK
M-Vision FCIS 9080 USB Ok
M-Vision FCIS 7000 Ok
M-Vision FCIS 7000 OLD Ok

Nextvission 8050 DCI ok
Nextwave Mx Series Ok
Nextwave Plus suc 2500 C Ok
Nokia MediaMaster 9650S Ok
Nokia 9800s Ok
Openbox X 820 and 800 - Test OK
ODS 3000 CI A Some problems

Page 8010 HD NOK
Panasonic TU-DSF Problems
Philips Dsr 7005 pvr NOK
Phoenix apollo ci+mc {sw version U106}-ok
Phonotrend SDR 2900 and 3000 Ok
Pixx Event FW 1.128 (und 1.121) some Freeze and channel changing probs

Reel-Box RSX (dream-pirates Image) - Test OK
Reelook 300S Some problems
Relook 400s running Neumo image 2.82 - Test Ok
REX/PIXX IV Ok

SAB Explorer series - Test OK
Samsung DSR9500AY OK
Sat Fox 7220 Ok
SatyCon F3CI Ok
s*yBox Ok
skybox neotion 3000 ok
Strong str 8700 Ok

Technomate 1000 CI - Test OK
Technomate 1500/1600 2CI - Test OK
Technomate DAPCI 5000
Technomate 5500 CI - Test OK
Tm 5500 cip plus { INH 208ACI-107 }----ok
Technomate 5500 DAPCI – Test Ok
Technomate tm 5500ci Ok
Technomate – TM- 7755 2VA 2CI – Test ok
Tm8000 hd80mc-ci {sw version 530} --- ok
Telewire 3103 PVR Some problems
Technisat Digit MF4-S Problems
Technisat S1- Some Problems
Topfiled TF 4000 PVR Ok
Topfiled TF 5000 PVR Ok
Topfield 5010 pvr Ok
Topfield 5510 pvr Ok
Topfiled TF 5000 CI Ok
Topfiled 5000 PVR Masterp. Ok
Topffield 5500 PVR - Test OK

Vantage Ok
Vissionnet VN8000CIS

XDOME Some problems
Xtreme Ok
Xtreme MSR-5690CXCI Ok

Yumatu MX2CI Ok

[edwardiablocam]

Its the same shit what happen with my Diablo cam after update from 2.32 to 2.34. From menu my Topfield 7700 i see initialising.....after couple seconds....stealth 2.34.....again initialising..... 2.34 jerk Diablo non stop. And all HBO channels and HD suisse after update stop work. I format cam and downgrade to 2.32. Its initialized ok.