NCam (official)

[chistera™]

NCam 5.2-r1 (official)

NCam 5.2-r1 (official) 14.09.2020

Changelog v5.2-r1:
- Rework code ref gbox_maxecmsend.
- Fix sharing instability side effect.
- [powervu] Fixed emm algo.
- Fixed warning messages with high GCC 9.x.x
- Fixed warning integer constant is too large for long type.
- Add Newcamd NCam and MGcamd (Stealth mode)
- Fixed gbox module ecm debug string error.
- Add repeat to ask all gbox readers again during fallback time.
- Fixed for CAK7 Cards HD03/04/05.


Compiled:
ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-uclibc Enigma2 - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2 - (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similars).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Armada 37xx).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Routers (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).

**************************************** ********** ********** ***********************************

Ncam settings web::

Ncam Admin Control: http://127.0.0.1:8181/ (192.168.x.x or host-xx.org)
user: root
password: ldteam

Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID. (Important to respect all 16 characters.

Change serverip (CCcam) 192.168.xx.xx for the ip of the receiver.

Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config

SoftCam.Key Not included!!
The emulator is inactive for default.

https://ufile.io/xn0gv9uj

[dreams@t]

NCam 5.5-r1(oficial).

Changes:
- Increased the limit of allowed clients.
- Fixes and optimizations in doublecheck.
- Fixes for DGcrypt and add Caid 4AB0.
- Add force ipv4 (Only viewable using IPV6).
- Increased MAX_ECM_SIZE for SECA/NAGRA/NAGRA_MERLIN.NCam 5.5-r1 (oficial).

NCam_5.5-r1.rar - 32.9 MB

[Mafia_DZ]

Here I leave you the version of NCam 5.6-r2 (official).

Changes:

- Remove Gbox protocol.
- Support CCcam 2.3.8 and 2.3.9 (Server/Client).
- Fixes for Newcamd Stealth.
- Add select menu Stealth mode for readers (Default NCam).
- Fixes for Skip CWs cheksum for Nagra/Seca.
- Some changes in dvbapi_set_section_filter for dvn.
- Small change with ECM table for dvn (DVBAPI).
- Update init and do ECM for reader-jet.
- Update decrypt_cw_ex for StreamGuard.
- Fix small BUG for readers internal/external.
- Fixes for WEBIF selectd MGcamd reader (newcamd server emulate).
- Added new builds for: Huawei HQ556a, Dreambox DM9x0 UHD and ONE|TWO,
James Donkey DUO, Vu+ Zero|Uno|Duo|Solo|Ultimo 4K, Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'.
- Minor fixes for lower CPU/RAM consumption.
- Internal adjustments for better Cache/CW CYCLE performance.
- Small fix for smoother zapping with NCam protocol.
- Updated sample and configuration files with a bit more detail.

Full Changelog

######################################## #################################
OFFICIAL version
NCam cardserver v5.6-r2, ( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )
Copyright (C) 2012 - 2022 developed by Javier Sayago (Javilonas).

Compiled

ncam.mips Enigma2 - Mipsel (Gigablue, Dream, Vu+, Xtrend, Formuler...).
ncam.mips-openpli_40 Enigma2 - Mipsel (Openpli 4.0 'Gigablue, Dream, Vu+, Xtrend, Formuler'...).
ncam.mips-uclibc Enigma2/Others - Mipsel (Tiviar Plus 'firmware no enigma2', and similar).
ncam.x86 Linux PC (32 bit - i686).
ncam.x86_64 Linux PC (64 bit).
ncam.x86_64-syn_atom Linux x86_64 (For Synology ATOM 64 bit).
ncam.ppc Enigma1 - (Power PC - DM600, 7000, 7020, 7020si...).
ncam.ppc-old Enigma1 - (Power PC OLD - DM500, 500S, DBox2...).
ncam.sh4 Enigma2/Spark sh4 - (Golden Media, Galaxy Innovations, Amiko...).
ncam.cortexa9hf-vfp-neon Enigma2/Others - ARM (Cortex-A9 - Wetek, Vu+4K, Octagon 4k and similar).
ncam.vuplus4k_arm Enigma2 - ARM (Vu+ Zero|Uno|Duo|Solo|Ultimo 4K and similar).
ncam.james_donkey_arm Enigma2 - ARM (James Donkey DUO and similar).
ncam.arm-aarch64-dreambox Enigma2 - ARM (Dreambox ONE|TWO).
ncam.arm-dreambox Enigma2 - ARM (Dreambox DM9x0 UHD).
ncam.arm-raspbian ARM (Raspberry pi 3, Prismcube, TInkerboard and other similar).
ncam.arm-android ARM (For Android ARM (API 24+)).
ncam.arm-marvell ARM (Synology Armada 375 and similar).
ncam.arm-armada37xx ARM (Synology Synology Armada 37xx and aarch64 similar).
ncam.arm-mca ARM (For Matrix CAM Air).
ncam.arm-samsungtv ARM (For Samsung TV).
ncam-router.mips Mips (Routers MIPSEL DD-WRT).
ncam.router-openwrt-brcm47xx.mips Mips (Routers openwrt brcm47xx).
ncam.router-openwrt-ar71xx.mips Mips (Routers openwrt ar71xx).
ncam.router-openwrt-brcm63xx.mips Mips (Routers openwrt brcm63xx).
ncam.router-openwrt-huawei-hg556a.mips Mips (Routers openwrt Huawei HQ556a).
ncam-x86_64-pc.exe Windows PC (64-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).
ncam-i686-pc.exe Windows PC (32-bit) (You Need DLL cygwin1.dll in C:\Windows\System32).


**************************************** **************************************** ***************



Important: Change xxxxxxxxxx (0-9 and A-F) on the NodeID (Important to respect all 16 characters).


Change serverip (CCcam) 192.168.xx.xx to the ip of the receiver.


Change extended_cw_api in ncam.conf (Use 1 for ARM (OE2.2), use 2 MPISEL (OE2.0)).


Change in ncam.conf max_time, cw_cache_size and cw_cache_memory:


max_time = 18 // The time that the ECMs are going to be ?Keep in the cache?.
cw_cache_size = 8000 // CW cache count Max storage size (Affects the CPU (don't set a value too high)).
cw_cache_memory = 16 // MBs max. memory used for CW cache size (Affects the RAM, don't set a value too high).


Config: /var/tuxbox/config
SoftCam.Key: /var/tuxbox/config


SoftCam.Key Not included!!
The emulator is inactive by default.


**************************************** **************************************** ***************
External download by Mega:

 https://mega.nz/file/eBQm0RxQ#MKaDbJKRp4WmbCZMXxdJe-FVTcAcp5E73uOcLDVeCFI 

[dreams@t]

NCam 6.0-r0(oficial)

( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )

Changelog v6.0-r0:
- Fixed a small BUG with the timeout logic (ecmtimeoutlimit and ecmnotfoundlimit).

NCam_6.0-r0.rar - 41.3 MB

Thx @ javilonas

[dreams@t]

NCam 6.1-r4 (oficial)

- Fix socket leaking.
- Update CW Cycle and others.
- Fix protocol webif, add others.
- Try Timeout and NOK solution.
- Clean global all emms from all readers after 30 days emm is last seen or 4 hours.
- Try kill free job data to timeout.
- Fix for protocol EMU.
- Update and more fixes.
- Fix restart.
- Fix for CW Cycle Max.
- Add new options to webif, resets readers (noks and timeouts).
- Increased Max Cycle List Entrys to 8000 Entrys.
- Increased Max Keep Cycletime to 480 min. (8 hours).

NCam_6.1-r4.zip

[dreams@t]

NCam 6.2-r0 (oficial)

( MIPS, PPC, X86, X86_64, SH4, ARM, EXE )

Changelog v6.2-r0:
- Fix restart, logs and warnings.
- Add latest changes Oscam.

NCam_6.2-r0.zip

Cygwin-dlls.zip


Thx @ javilonas

[Mafia_DZ]

02.04.2023

Here I leave you the version of NCam 6.8-r1 (official).

NCam-6.4-r4 (Official)

Changelog v6.4-r4:
- Add support iCam (Thanks to the creator @icb of the ICAM v8 patch).
- Add new KScamd protocol (still in development).
- Fixes for Stream Relay.
- Fixes for Radegast protocol and icam.
- Fixes for Viaccess and VideoGuard.
- Optimized for lower RAM and CPU consumption.
- Fixed issue preventing ICAM from starting
- Fixed issue that forced KScamd to have newcamd line active.
- Fixed the problem that modified the protocols used by users when accessing them via webif.

Thx Javilonas

NOTE: the files were split into two folders. Download both



https://www.file-upload.net/download....8-r1.zip.html

[mehmetkarahanlı]

27.01.2024

NCam-6.9-r2 (Official)

all the versions except the windows ones that only come out when the version is final.

Thx Javilonas

NOTE: the files were split into two folders for capacity reasons. Download both

- NCam_6.9-r2

https://sbupload.com/bd88302a6895c87f 

- NCam_6.9-r2

https://sbupload.com/56301f606018078e 

[ocean777]

NCam-6.9-r3 (Official)

the only ones that have to miss are those of windows that as I always say, I leave them for when the version is final

thx Javilonas

[dreams@t]

NCam-6.9-r4 (Official)

Changelog v6.9-r4:
Espero que esta versión os funcione mucho mejor que la del sábado.

-Se han corregido algunos errores en la versión anterior.

-Actualizado jQuery a 3.7.1.

-Actualizada la lógica del Doublecheck y del Skip CWs checksum test. (seguramente necesite pulirse un poco más ya que el nuestro no funciona igual que en Oscam)

-Actualizado el filtro para las CW falsas, siendo ahora más agresivo con los canales de la tierra (1810).

-Optimizado el sistema Icam para un menor consumo de CPU. (hace falta testeo para saber si sigue rulando)

Darle las gracias a todos por los testeos pero en especial al compañero Arthur Fleck por ******** por el testeo rápido, a Pavón por sus testeos en icam o abertis cuando lo he necesitado y a PoP_PeQuE por sus testeos generales y constantes en VPS.

Posiblemente se hagan más cambios dentro de unos días.

Thx @ Javilonas


Download