Oscam-Modern (automatic card recognition e.g. HD + / ORF) NewNigma2 Image - installation and description

The prerequisite is that the image is up to date.
For the OE2.5 / OE2.6 branch the daily with the current date and for OE2.0 a current weekly (NN2 v3.x and v4.x versions are no longer supported and no longer have a feed).
Download the images: feed.newnigma2.to/daily/images/

The current OSCam Modern 1543 (based on the Trunk 11577 version) contains: Cardlistpatch (configuration-free operation of common smart cards), EMU, Modern web interface. The port for the web interface is 8888.
In order for the automatic configuration to work, no OSCam configuration files must be in "/ usr / keys", "/ var / keys", "/ etc / tuxbox / config", "/ var / tuxbox / config" and "/ data / config" lie.
For manual configuration, store your own configuration files in "/ usr / keys /" (alternatively: "/ var / keys", "/ etc / tuxbox / config", "/ var / tuxbox / config", "/ data / config "). Always use only one directory and not distribute it over several.

Name of the package:
OE2.5 / OE2.6: newnigma2-camd-oscam-modern_nn2-git-1543
OE2.0: newnigma2-camd-oscam-nn2-unstable_nn2-git-1535
Version 1535, which is based on Trunk 11517, is on the OE2.0 feed.

(The distribution of the packages outside of the Newnigma2 image / board without consulting the NN2 team is not desired.)

Installation:
- Call up Newnigma2 Services via the blue button
- Select EMU menu
- Add / remove camds
- Select the desired Softcam and install it with Ok

Attention: With the DM920uhd the smart card with the chip facing UP must be in the card reader, with the other Dreamboxes with the chip facing down!

Activate:
- Call up Newnigma2 Services via the blue button
- EMU menu> EMU selection
- Select Softcam and start with the Green button

Create log:
- Start OSCam
- Card out
- Open the OSCam web interface: http://ip.der.dream.box:8888
- Click on "Live Log" above
- Card in

If the OE2.5 image only shows an older OSCam Modern despite the current software version, then uninstall it and install the new OSCam. Should the following message appear: Depends: libpcsclite1> = 1.8.13 but it is Not installed E: Unmet dependencies. Try using-f, this is how to solve it:
execute via console (Telnet), press Enter after each line and wait for execution
cd /tmp
wget feed.newnigma2.to/daily/oe2.5/deb/arm/libpcsclite1_1.8.13-r0.1_armhf.deb
apt-get update
dpkg --install --force-depends --force-overwrite /tmp/*.deb
apt-get -y -f install
apt-get autoremove
up