oscam mips-tuxbox-oe2.0

[Mafia_DZ]

14.10.2022

oscam-svn11714-mipsel_s3_ssl102-webif-dvbapi-libusb-cachex-cacheex_AIO-emu798

icam_dvbapi_radegast_patch 11714


have fun and enjoy
Mafia_DZ

[Mafia_DZ]

14.10.2022

oscam-svn-mipsel_s3_ssl100-webif-dvbapi-libusb-cachex-cacheex_AIO-emu798

icam_dvbapi_radegast_patch11714

oscam-svn-mipsel_s3_ssl098-webif-dvbapi-libusb-cachex-cacheex_AIO-emu798

icam_dvbapi_radegast_patch 11714

have fun and enjoy
Mafia_DZ

[Mafia_DZ]

15.10.2022

oscam-svn-dreambox_fpu-dvbapi-libusb-cachex-cacheex_AIO-emu798

icam_dvbapi_radegast_v6_patch-upx 11714

have fun and enjoy
Mafia_DZ

[Mafia_DZ]

16.10.2022

oscam-1.20_svn11714-798-mipsel-oe20-linux-gnu-ICAM_DVBAPI_V6

built_by_Alex 11714


have fun and enjoy
Mafia_DZ

[Mafia_DZ]

16.10.2022

oscam-svn11714-mipsoe20-webif-dvbapi-emu798-icam_dvbapi_v6_patch

oscam-1.20_svn-r11714-798-ICAM-v6


V6 without Radegast for MIPS receivers such as VU+ Solo SEv2 built with Toolchain-MIPS-Tuxbox-OE2.0_s_u_p

Please note the config is as minimal as possible and without ssl

Version: oscam-1.20_svn-r11714-798-ICAM-v6
Compiler: mipsel-unknown-linux-gnu
Box type: vusolose (generic)

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
DVB API with ICAM streamrelay support: yes
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: no
Cache exchange AIO support: no
CW Cycle Check support: no
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no
Emulator support: yes
Built-in SoftCam.Key: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: no
gbox: no
radegast: no
scam: no
serial: no
constant CW: no
Pandora: no
ghttp: no

Reader support: yes

Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: no
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: no
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: no

have fun and enjoy
Mafia_DZ

[Mafia_DZ]

22.10.2022

oscam-1.20_svn11715-798-mipsel-oe20-linux-gnu-ICAM_DVBAPI_V7-


built_by_mafia_dz

[Mafia_DZ]

23.10.2022

oscam-svn11715-mipsoe20-webif-dvbapi-emu798-icam_dvbapi_v7_patch

built_by_mafia_dz


V7 without Radegast for MIPS receivers such as VU+ Solo SEv2 built with Toolchain-MIPS-Tuxbox-OE2.0_s_u_p

Open the file support/configs/compiler_option and replace -O1 with -O3 there.​
Then open the s3 in the main directory and there the line​
cc_opts="-ggdb -pipe -ffunction-sections -fdata-sections -o nodeadcode"​
replace with these
cc_opts="-ggdb -pipe -ffunction-sections -fdata-sections -funroll-loops -fomit-frame-pointer -fno-tree-vectorize"​

Please note the config is as minimal as possible and without ssl

OSCam ver: 1.20_svn rev: 11715-798 target: mipsel-unknown-linux-gnu
| Tools:
| CROSS = /home/ubuntu/Downloads/s3_releases/support/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-
| CC = /home/ubuntu/Downloads/s3_releases/support/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-gcc
| Settings:
| CONF_DIR = /var/tuxbox/config
| CC_OPTS = -O3 -ggdb -pipe -ffunction-sections -fdata-sections -funroll-loops -fomit-frame-pointer -fno-tree-vectorize
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -fexpensive-optimizations -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LDFLAGS = -Wl,--gc-sections -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LIBS = -lcrypto -lm -lpthread -ldl -lrt
| UseFlags = USE_LIBCRYPTO=1 USE_UTF8=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CLOCKFIX WITH_EMU WITH_SOFTCAM
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : INTERNAL
| Compiler : mipsel-unknown-linux-gnu-gcc (crosstool-NG 1.15.2) 4.6.3
| Config : build/mipsel-unknown-linux-gnu/config.mak
| Binary : /home/ubuntu/Downloads/s3_releases/support/binaries/oscam-svn11715-mipsoe20-webif-dvbapi-emu798

[Mafia_DZ]

24.10.2022

oscam-1.20_svn11715-798-mipsel-oe20-linux-gnu-ICAM_DVBAPI_V8

built_by_Alex 11715

greeting alex

[Mafia_DZ]

05.11.2022

Oscam-svn11715-mipsel_s3_ssl102-webif-dvbapi

emu798-icam_dvbapi_v8_patch-opt


V8 without Radegast for MIPS receivers like VU+ Solo SEv2 built with toolchain-mipsel_s3_ssl102

Open the file support/configs/compiler_option and replace -O1 with -O3 there.
Then open the s3 in the main directory and there the line
cc_opts="-ggdb -pipe -ffunction-sections -fdata-sections -o nodeadcode"
replace with these
cc_opts="-ggdb -pipe -ffunction-sections -fdata-sections -funroll-loops -fomit-frame-pointer -fno-tree-vectorize -fno-schedule-insns"

Please note the config is as minimal as possible and without ssl

[Mafia_DZ]

05.11.2022

Oscam-svn11715-mipsoe20-webif-dvbapi

emu798-icam_dvbapi_v8_patch-opt


V8 without Radegast for MIPS receivers like VU+ Solo SEv2 built with toolchain-mipsel_s3_ssl102

Open the file support/configs/compiler_option and replace -O1 with -O3 there.
Then open the s3 in the main directory and there the line
cc_opts="-ggdb -pipe -ffunction-sections -fdata-sections -o nodeadcode"
replace with these
cc_opts="-ggdb -pipe -ffunction-sections -fdata-sections -funroll-loops -fomit-frame-pointer -fno-tree-vectorize -fno-schedule-insns"

Please note the config is as minimal as possible and without ssl