[Plugin] StalkerPro

[dreams@t]

StalkerPro v1.0

@Zakaria:
Since the first plugin was a disappointment iv'e decided to work on a new plugin from scratch now loading channels is fast compared to first plugin with epg and picons catch-up will be added later, the reason i drop this version before finishing the whole plugin is to test the main functionality of the plugin.



the plugin is so simple you add your portals to the file then you select the portal you want , in the live section you can switch between channels and providers using green button and ok key to play the selected channel



Up/Down to show the channel selection and left/right to zap



VOD







Tv shows will be added soon after this release.

You can add your portals in MultiStalkerPro.json located in /etc/enigma2 but you can put the file in hdd and select it in the settings.

[
    {
        "http://portal:8080": "00:1a:79:00:00:00"
    },
    {
        "http://portal:8080": "00:1A:79:A7:E0:C6"
    },
    {
        "http://portal": "00:1a:79:00:00:00"
    },
    {
        "http://portal": "00:1a:79:00:00:00"
    },
    {
        "http://portal": "00:1a:79:00:00:00"
    },
    {
        "http://portal": "00:1a:79:00:00:00"
    }
]

@Zakaria:
The ipk i drop down it just for arm devices and python3.11 (openatv 7.3) because i compile on my pc and it takes ages to compile, i will share other ipk for lower pythons later in the following day's.

[dreams@t]

Stalkerpro_1.0+git12+2187bc4-r0_cortexa15hf-neon-vfpv4


Thx @Zakaria

[dreams@t]

Stalkerpro_1.0+git14+2187bc4-r0_cortexa15hf-neon-vfpv4


Thx @Zakaria

[dreams@t]

Stalkerpro_1.0+git15+2187bc4-r0_cortexa15hf-neon-vfpv4


Thx @Zakaria

[Mafia_DZ]

15.06.2023

enigma2-plugin-extensions-multi-stalkerpro_1.0+git17+3e81926-r0_armv7ahf-neon

py2

thanks byziko

[Mafia_DZ]

21.06.2023

enigma2-plugin-extensions-multi-stalkerpro_1.0+git17+3e81926-r0_all

For people who have an installation problem with openpli under armv7
small modification for the ipk and added control files for the removal of the plugin.
It has of course the modification to avoid the crash with the blue button.
You can test this ipk on attachement (python 2.7 armv7)

Thanks @ demosat

[MireQQ]

Hello,

could someone tell me, is it possible to install this amazing plugin on Zgemma H8.2H?

[Mafia_DZ]

Hello,

could someone tell me, is it possible to install this amazing plugin on Zgemma H8.2H?

This plugin can be installed on Zgemma H8.2H

First impression when opening the box, the new devices are getting smaller and smaller, the connection is good with USB 3.0 and everything you need to be comfortable.
The installed image is Openatv 6.1 which is very good and allows you to have fun.
There is room for plugins but without exaggeration since the image is close to 90mb and the space is 256mb.
What immediately surprises is the image loading speed, 30 seconds maximum, it must be said that there is power there: ARMprocessor with 1500MHz Quad-coreCPU.
It is of course able to play 4K channels, Support4K-2160p
The device does the multistream on the channels of 5° west, but like all the zgemma tested does not do the powervu live.
The tuner is quite powerful, it detects weak signals well, the image quality is good...
The remote control, a classic china model, is not the most user-friendly....
I also tested the latest image from openpli, it seems that when opening the channels, a jerk of a few seconds occurs before launching properly.....




regards,
Mafia_DZ

[MireQQ]

@Mafia_DZ,
Thanks for reply. I can agree with your opinion on this box.
Which .ipk file from linked above could be used for H8.2H?

[MireQQ]

Hello.
I have tried to install the plugin in my Zgemma H8.2H but I received info that software is incompatible.
OpenATV v.7.3. Fresh installation. Any idea?