E²_ Ciefp Settings Motor Plugin by 𝗖𝗶𝗲𝗳𝗽

[mehmetkarahanlı]

CiefpsettingsMotor v1.6
python3

The plugin downloads the motor settings directly from github and inserts it into the receiver.

Plugin skida motornu listu direktno sa github i ubacuje je u risiver.
The plugin downloads the motor settings directly from github and inserts it into the receiver.

Link za instalaciju preko telneta se nalazi u fajlu
The link for installation via telnet is in the file



thx ciefp

[mehmetkarahanlı]

Download and install Ciefp settings from GitHub

CiefpSettingsDownloader v1.1 py3

Plugin je namejen za instalaciju više verzija mojih listi sa Github
Pokrenete plugina izaberete želejenu verziju sačekate par sekundi
ako izađe poruka :
Reload successful! New settings are now active. .::ciefpsettings::.
Instalacija je završena i nije potreabn restart

The plugin is intended for installing multiple versions of my settings from Github
Start the plugin, select the desired version and wait a few seconds
if the message appears:
Reload successful! New settings are now active. .::ciefpsettings::.
The installation is complete and no restart is required

instalacija se vrši preko telneta sa wget komandom
installation is done via telnet with the wget command



ciefp-E2-1sat-19E
ciefp-E2-2satA-19E-13E
ciefp-E2-2satB-19E-16E
ciefp-E2-3satA-9E-10E-13E
ciefp-E2-3satB-19E-16E-13E
ciefp-E2-4satA-28E-19E-13E-30W
ciefp-E2-4satB-19E-16E-13E-0.8W
ciefp-E2-5sat-19E-16E-13E-1.9E-0.8W
ciefp-E2-6sat-23E-19E-16E-13E-1.9E-0.8W
ciefp-E2-7sat-23E-19E-16E-13E-4.8E-1.9E-0.8W
ciefp-E2-8sat-28E-23E-19E-16E-13E-4.8E-1.9E-0.8W
ciefp-E2-9sat-28E-23E-19E-16E-13E-9E-1.9E-0.8W-5W
ciefp-E2-10sat-39E-28E-23E-19E-16E-13E-9E-4.8E-1.9E-0.8W
ciefp-E2-13sat-42E-39E-28E-23E-19E-16E-13E-9E-7E-4.8E-1.9E-0.8w-5w
ciefp-E2-16sat-42E-39E-28E-26E-23E-19E-16E-13E-10E-9E-7E-4.8E-1.9E-0.8w-4W-5w
ciefp-E2-18sat-42E-39E-36E-33E-28E-26E-23E-19E-16E-13E-10E-9E-7E-4.8E-1.9E-0.8w-4W-5w
ciefp-E2-75E-34W

thx ciefp

[mehmetkarahanlı]

CiefpsettingsMotor Plugin py3

CiefpsettingsMotor v1.6

Plugin skida motornu listu direktno sa github i ubacuje je u risiver.
The plugin downloads the motor settings directly from github and inserts it into the receiver.

Link za instalaciju preko telneta se nalazi u fajlu
The link for installation via telnet is in the file

thanks ciefp





DOWNLOAD

[mehmetkarahanlı]

CiefpWhitelistStreamrelay

CiefpWhitelistStreamrelay is a plugin for Enigma2 receivers, designed for automated generation of
`whitelist_streamrelay` file using data from predefined userbouquet files.

Main functionalities:
1. Generation of whitelist_streamrelay file:
- The plugin processes data from selected bouquet files (userbouquet) and extracts valid lines containing
information about streams.
- Creates or updates `whitelist_streamrelay` file in `/etc/enigma2` directory.
- Packages supported SKYDE 19.0E - SKYUK 28.2E.

2. Display information to user:
- Displays the number of lines added to `whitelist_streamrelay` file, providing the user with an overview of the processing results.

3. Restart Enigma2:
- After the file generation is complete, the user has the option to confirm restart Enigma2 to load the new settings.
- Restart is performed only after the user presses OK on the remote control.

Why use this plugin?
- It is suitable for users who frequently update their streamrelay lists and want an automated process without manually editing files.
- A simple and intuitive interface allows viewing of generated lines and control over system restart.
- This plugin is a practical tool for advanced Enigma2 system users who want better management and organization of streamrelay configurations.
This plugin was specifically created for my settings, it will not work with other settings.

.::ciefpsettings:

wget -q "--no-check-certificate" https://raw.githubusercontent.com/ciefp/CiefpWhitelistStreamrelay/main/installer.sh -O - | /bin/sh

[mehmetkarahanlı]

CiefpsettingsMotor v1.6 py3

The plugin downloads the motor settings directly from github and inserts it into the receiver.


The link for installation via telnet is in the file

wget https://raw.githubusercontent.com/ciefp/CiefpsettingsMotor/main/installer.sh -O - | /bin/sh

[mehmetkarahanlı]

E²_ Ciefp Settings Motor Plugin by ����������


CiefpsettingsMotor Plugin.txt

Download Above Attachment

[mehmetkarahanlı]

CiefpSettingsMotor Plugin (v2.1)

What does the plugin do?
CiefpSettingsMotor is a simple tool that downloads, unpacks and installs the latest channel list for motorized satellite dishes
directly from GitHub (ciefp-E2-75E-34W). This list includes satellite bouquets (eg 19.2E, 16.0E, 13.0E...),
thematic bouquets (sport, movies, music), IPTV channels and markers, adapted for a wide range of satellite positions.

How is it used?
1. Start the plugin from the Enigma2 receiver menu.
2. Press "OK" on the remote control.
3. Wait for the list to download and install — the process is automatic and only takes a few moments.
4. After installation, the receiver will automatically refresh and the new list will be active.

What's new in version 2.1?
• Saves user bouquets: Your personally created bouquets (eg userbouquet.moje_favorite.tv) will not be deleted.
The plugin keeps them and places them at the end of the list in bouquets.tv, while new satellite, thematic and IPTV bouquets are added to the top.
• Complete installation: All files from the list (lamedb, .tv, .radio) are copied to /etc/enigma2/,
and satellites.xml in /etc/tuxbox/, ensuring full up-to-dateness.
• Simplicity: No complicated settings — everything works with one click.

Who is it intended for?
This plugin is ideal for users with motorized antennas who want an updated channel list without losing their custom settings.
Whether you are a beginner or an experienced user, installation is quick and easy.

..:: ciefpsettings ::..


DOWNLOAD

CiefpsettingsMotor Plugin 2.1.txt

Download Above Attachment