║➽║E²║Plugin║➽║Ciplus Helper Plugin║*.DreamOS║

[mehmetkarahanlı]

enigma2-plugin-extensions-ci-plus-helper_6.1_all

#### New Features
- **WQHD (2560×1440) skin support** – optimized interface for 2K displays.
- **ARM/Zgemma‑ARM separation** – dedicated binary for Zgemma ARM models (`h7`, `h10`, `h9combo`, `h9twin`, `h9combose`, `h9twinse`) now installed automatically via `postinst`.
- **CI+ slot management** – enable/disable CI+ certification individually for slot 0 and slot 1 (ARM boxes only).
- **"Restart GUI" command** – quick restart of Enigma2 interface directly from the plugin menu.
- **`info.txt` now reports `ciplushelper-zgemma-arm`** – for better debugging and traceability.
- **Universal hardware detection** – now supports **ALL ARM and MIPSEL** boxes with intelligent fallback detection.

#### Improvements
- **Unified hardware detection** – primary detection from `/proc/stb/info/` with fallback to `/tmp/boxbranding.cfg`, `opkg print-architecture` and `uname -m` for full compatibility with **OpenPLi, OpenATV, OpenBH, OpenViX** and all other images.
- **Faster process status** – replaced `top` with `pgrep` for quicker and cleaner process checks.
- **Refactored plugin code** – used a `commands` dictionary to make action handling more compact and maintainable.
- **Updated "Supported models" message** – split into ARM and MIPSEL lists for better clarity.
- **Init script versioning** – `ciplushelper.sh` now includes `VERSION=1` to prevent unnecessary overwrites on update.
- **Improved postinst** – now detects `ustym4kpro`, `dm8000`, `uclan` and all generic ARM/MIPSEL boxes.
- **Better error handling** – clear error messages with instructions for reporting unsupported boxes.

#### Bug Fixes / Corrections
- Fixed model detection for boxes that do not provide `getImageVersion`.
- Fixed detection for boxes where `/proc/stb/info/model` returns generic value (e.g., `dm8000` on Uclan boxes).
- Removed dependency on `/var/local` extraction – plugin now uses its own pre‑extracted binary folders (no `.tar` extraction required).
- Corrected skin dimensions for FHD displays (slightly increased screen height to fit all menu entries).
- Fixed `postrm` script to properly stop service before removal.

#### Supported Devices
- **ARM:** HD51, VS1500, Zgemma H6/H7/H9combo(se)/H9twin(se)/H10, Pulse 4K(mini), h17, 8100s, hd61, Uclan (ustym4kpro), DM8000, and all generic ARM boxes.
- **MIPSEL:** Mutant hd1500/hd2400, Xtrend et8000/et10000, Formuler f1/f3/f4, Triplex, Cube, and all generic MIPSEL boxes.

enigma2-plugin-extensions-ci-plus-helper_6.1_all.ipk 

[mehmetkarahanlı]

enigma2-plugin-extensions-ci-plus-helper_6.3_all

Add 'Update plugin' menu command that runs the installer script from GitHub.
Fix restart GUI functionality by using proper MessageBox callback pattern and TryQuitMainloop instead of killall -9 for graceful shutdown.

Thanks lululla

enigma2-plugin-extensions-ci-plus-helper_6.3_all.ipk 

[mehmetkarahanlı]

enigma2-plugin-extensions-ci-plus-helper_6.4_all

• Improved: Oscam detection now uses ps -A | grep -i for universal compatibility (works with OSCam_11965-803 and all variants).
• Improved: Oscam status is now updated in real-time using onShown callback.
• Improved: Toggle Oscam uses PID-based kill and binary detection via /proc/<pid>/exe for reliable start/stop.
• Fixed: Oscam toggle now properly starts Oscam using the exact binary path.

enigma2-plugin-extensions-ci-plus-helper_6.4_all.ipk.zip

[chistera™]

code php ?????????????

[mehmetkarahanlı]

## CI+ Helper Plugin – Changelog v6.0






---






### ���� English






#### New Features


- **WQHD (2560×1440) skin support** – optimized interface for 2K displays.


- **ARM/Zgemma‑ARM separation** – dedicated binary for Zgemma ARM models (`h7`, `h10`, `h9combo`, `h9twin`, `h9combose`, `h9twinse`) now installed automatically via `postinst`.


- **CI+ slot management** – enable/disable CI+ certification individually for slot 0 and slot 1 (ARM boxes only).


- **"Restart GUI" command** – quick restart of Enigma2 interface directly from the plugin menu.


- **`info.txt` now reports `ciplushelper-zgemma-arm`** – for better debugging and traceability.


- **Universal hardware detection** – now supports **ALL ARM and MIPSEL** boxes with intelligent fallback detection.






#### Improvements


- **Unified hardware detection** – primary detection from `/proc/stb/info/` with fallback to `/tmp/boxbranding.cfg`, `opkg print-architecture` and `uname -m` for full compatibility with **OpenPLi, OpenATV, OpenBH, OpenViX** and all other images.


- **Faster process status** – replaced `top` with `pgrep` for quicker and cleaner process checks.


- **Refactored plugin code** – used a `commands` dictionary to make action handling more compact and maintainable.


- **Updated "Supported models" message** – split into ARM and MIPSEL lists for better clarity.


- **Init script versioning** – `ciplushelper.sh` now includes `VERSION=1` to prevent unnecessary overwrites on update.


- **Improved postinst** – now detects `ustym4kpro`, `dm8000`, `uclan` and all generic ARM/MIPSEL boxes.


- **Better error handling** – clear error messages with instructions for reporting unsupported boxes.






#### Bug Fixes / Corrections


- Fixed model detection for boxes that do not provide `getImageVersion`.


- Fixed detection for boxes where `/proc/stb/info/model` returns generic value (e.g., `dm8000` on Uclan boxes).


- Removed dependency on `/var/local` extraction – plugin now uses its own pre‑extracted binary folders (no `.tar` extraction required).


- Corrected skin dimensions for FHD displays (slightly increased screen height to fit all menu entries).


- Fixed `postrm` script to properly stop service before removal.






#### Supported Devices


- **ARM:** HD51, VS1500, Zgemma H6/H7/H9combo(se)/H9twin(se)/H10, Pulse 4K(mini), h17, 8100s, hd61, Uclan (ustym4kpro), DM8000, and all generic ARM boxes.


- **MIPSEL:** Mutant hd1500/hd2400, Xtrend et8000/et10000, Formuler f1/f3/f4, Triplex, Cube, and all generic MIPSEL boxes.






---






### ���� Italiano






#### Nuove Funzionalità


- **Supporto skin WQHD (2560×1440)** – interfaccia ottimizzata per display 2K.


- **Separazione ARM / Zgemma‑ARM** – binario dedicato per i modelli Zgemma ARM (`h7`, `h10`, `h9combo`, `h9twin`, `h9combose`, `h9twinse`) ora installato automaticamente tramite `postinst`.


- **Gestione slot CI+** – abilita/disabilita la certificazione CI+ singolarmente per lo slot 0 e lo slot 1 (solo box ARM).


- **Comando "Riavvio GUI"** – riavvio rapido dell'interfaccia Enigma2 direttamente dal menu del plugin.


- **`info.txt` ora riporta `ciplushelper-zgemma-arm`** – per un migliore debug e tracciabilità.


- **Rilevamento hardware universale** – ora supporta **TUTTI i box ARM e MIPSEL** con rilevamento intelligente.






#### Miglioramenti


- **Rilevamento hardware unificato** – rilevamento primario da `/proc/stb/info/` con fallback su `/tmp/boxbranding.cfg`, `opkg print-architecture` e `uname -m` per piena compatibilità con **OpenPLi, OpenATV, OpenBH, OpenViX** e tutte le altre immagini.


- **Controllo processo più veloce** – sostituito `top` con `pgrep` per verifiche più rapide e pulite.


- **Codice plugin rifattorizzato** – usato un dizionario `commands` per rendere la gestione delle azioni più compatta e manutenibile.


- **Messaggio "Modelli supportati" aggiornato** – suddiviso in elenchi ARM e MIPSEL per maggiore chiarezza.


- **Versione script init** – `ciplushelper.sh` ora include `VERSION=1` per evitare sovrascritture non necessarie durante l'aggiornamento.


- **Postinst migliorato** – ora rileva `ustym4kpro`, `dm8000`, `uclan` e tutti i box ARM/MIPSEL generici.


- **Gestione errori migliorata** – messaggi di errore chiari con istruzioni per segnalare box non supportati.






#### Bug Fix / Correzioni


- Risolto il rilevamento del modello per i box che non forniscono `getImageVersion`.


- Risolta la rilevazione per i box dove `/proc/stb/info/model` restituisce un valore generico (es. `dm8000` sui box Uclan).


- Rimossa la dipendenza dall'estrazione in `/var/local` – il plugin ora usa le cartelle binarie pre‑estratte (nessuna estrazione `.tar` richiesta).


- Corrette le dimensioni della skin per display FHD (altezza leggermente aumentata per adattare tutte le voci di menu).


- Corretto lo script `postrm` per fermare correttamente il servizio prima della rimozione.






#### Dispositivi Supportati


- **ARM:** HD51, VS1500, Zgemma H6/H7/H9combo(se)/H9twin(se)/H10, Pulse 4K(mini), h17, 8100s, hd61, Uclan (ustym4kpro), DM8000 e tutti i box ARM generici.


- **MIPSEL:** Mutant hd1500/hd2400, Xtrend et8000/et10000, Formuler f1/f3/f4, Triplex, Cube e tutti i box MIPSEL generici.






---






## Installation / Installazione






**IPK** – just install as usual.


**IPK** – installa come al solito.






After installation, **reboot your box** to complete the setup.


Dopo l'installazione, **riavvia il box** per completare la configurazione.

[mehmetkarahanlı]

code php ?????????????

https://github.com/nrdn226/enigma2/b...plushelper.ipk

[dreams@t]

code php ?????????????

Hi,

This is the latest version 6.5 updated by lululla.

Test py2 compatibility

Rg