║E²║Plugin║CiefpSignalInfo║By Ciefp║

[mehmetkarahanlı]

..:: CiefpSignalInfo v1.5 ::..
Brief description
An advanced plugin for displaying signal and channel information on Enigma2 receivers.
Supports DVB-S/S2, DVB-T/T2, and DVB-C/C2 tuners.
Displays detailed technical parameters, encryption, PIDs, and real-time signal data.
Includes a mini-skin that allows for quick signal checks and channel switching without leaving the current view.

CiefpSignalInfo (main screen)
✅ Display of all channel information (Channel, Provider, Satellite)
✅ DVB-S/S2: Frequency, Polarization, Symbol Rate, FEC, Modulation, System, PLS Mode/Code
✅ DVB-T/T2: Channel (channel number), Frequency, Bandwidth, Code Rate HP/LP, Constellation, Trans. Mode, Guard Int., Hierarchy
✅ DVB-C/C2: Frequency, Symbol Rate, Modulation, FEC, System
✅ PIDs (Video, Audio, PCR, PMT, Teletext)
✅ Encryption (CAID list + [ACTIVE] marker)
✅ SI/TS/ONID
✅ Service Reference
✅ Picon (DVB-S and DVB-T)
✅ Satellite name (for DVB-S)
✅ SNR/AGC bars + % + dB
✅ Time and date
✅ GREEN button → Satfinder (with signal, error-free)
✅ BLUE button → Mini skin

CiefpSignalInfoMini (mini skin, top-centered)
✅ Picon + channel name
✅ SNR/AGC bars + %
✅ dB value
✅ Parameters in 3 lines (Freq/Pol, SR/FEC, System/Mod for DVB-S; CH:24 498MHz, CR/Const, System/Mode for DVB-T)
✅ Channel switching via left/right arrows
✅ Channel list via up/down arrows
✅ Auto-refresh on channel change
✅ Auto-close after 15s
✅ EXIT/OK/BLUE closes it

## Buttons:

Button Function
🔴 RED Close plugin
🟢 GREEN Open Satfinder (with active tuner)
🔵 BLUE Open Mini Skin
OK / EXIT Close plugin
🎯 Mini Skin
The mini skin opens via the BLUE button from the main screen. It appears centered at the top (like the OpenATV info bar) and allows for a quick signal check while changing channels. How to use the mini-skin
Button Function
◄ LEFT Previous channel
► RIGHT Next channel
▲ UP Open channel list
▼ DOWN Open channel list
OK Close mini-skin
EXIT Close mini-skin
BLUE Close mini-skin
Mini-skin automation
🕐 Auto-close after 15 seconds of inactivity
🔄 Timer reset on every channel change (stays open while changing)
⚡ Instant refresh upon channel change (immediate + 300ms + 800ms)
🎯 All values ​​update automatically: picon, channel name, SNR, AGC, dB, parameters

What the mini-skin displays
For DVB-S/S2:
Line 1: 11914 H — Frequency + Polarization
Line 2: 30000 3/4 — Symbol Rate + FEC
Line 3: DVB-S2 8PSK — System + Modulation

For DVB-T/T2:
Line 1: CH:24 498MHz — Channel Number + Frequency
Line 2: 7/8 64QAM — Code Rate + Constellation
Line 3: DVB-T 8K — System + Transmission Mode

For DVB-C/C2:
Line 1: 450 MHz — Frequency
Line 2: 6900 256QAM — Symbol Rate + Modulation
Line 3: DVB-C 3/4 — System + FEC


## Author ##
✅ Ciefp
✅ 2026
..:: CiefpSettings ::..

CiefpSignalInfo.txt (

Download Above Attachment

[mehmetkarahanlı]

CiefpSignalInfo v1.6 — Short description
What's new
v1.6 introduces an ECM status bar — displaying real-time information on the decoding of encrypted channels.

New features
ECM status bar below the main info panel
Using — protocol (cccam, oscam, newcamd, etc.)
Address — server address (e.g., turbocc.us:11000)
Hops — number of hops to the card
ECM Time — decoding time in ms (e.g., 468)
CA System + CAID — e.g., Nagra (0x1814)

Support for various emulators — OSCam, NCam, CCcam, mgcamd, Wicardd, gbox
Automatic key recognition: reader / source / src, from / host / ip / address, using / protocol

Smart display — ECM bar appears only during active decoding (FTA channels remain uncluttered)

Author: Ciefp
Version: 1.6
Date: 20.09.2026