Help with new card

[gascp]

Hi, i ordered a gamma card from this store
http://www.satsupreme.com/showthread.php?t=50832
and it seems i'll have it in few days.
Can you help me for my first steps with gamma ?
i have a cas3 plus programmer and a diablo ver 2.3 and a DM 500.
Thank you

[gascp]

Kapoios paidia ?
Eida kapoies odigies apla thelo na eimai sigoyros mhn katastrepso thn karta .

Eyxaristo

[archem]

#You will need install in ur pc or laptop, microsoft NET FRAME WORKS at l east version 2.0, available from microsoft web.

#A straight serial cable 9 pin with the correct ends needed

Please follow this steps in the order i m sugesting:

1. Open cas 3 by click the icon on your desktop
2. connect the usb cable, wait till program starts
3. go to untilities tab
4. click the phoenix mode
5. choice 3.579 mhz usally for pc, or 6 mhz for laptop
6. hide button
7. open the needed loader with glasses by double click it (gammaloader 1.1)
8. in the loader window when opens correct the settings in com port,
tick the 6 mhz button only if need it, load the latest file where u saved
it.
9. Insert your card chip down & connect the serial cable
10. now click program

Shortly u will see the message "card program succesfully"

Thats it!!!
Take out card & plug it in your stb / cam & wait ti AU.

Sometimes some small tips need to be done for faster AU:
Go to the tranporder that you think it may AU better, switch on / off your stb, flick channels up / down, take card out ot the cam stb slot etc

-----------------------------------------------------------------
NOTE

If you see the message NO ATR then go to step 5 & change the mhz.
Is good advise as well to check your serial cable if is been connected well!

Duo fores tha programmatiseis thn karta.Thn prwth tha sou leei card update kai dipla arithmo. Otan sou grapsei card program succesfully tha pathseis ksana program.

[gascp]

Duo fores tha programmatiseis thn karta.Thn prwth tha sou leei card update kai dipla arithmo. Otan sou grapsei card program succesfully tha pathseis ksana program.

poia version ? eida oti yparxoyn treis. H 1.0, 1.1 kai 2.0
mesa apo to idio programma xvris na bgo tha kano duo fores program ?

Se eyxaristo poli !

[archem]

Tha xrhsimopoihseis thn 1.1 . An sou grapsei updating card kai arxizei kai metraei apo to 1-275 kai meta apo to 30-0, thelei kai deuterh fora.Ean sou grapsei programming card den xreiazetai deuterh fora.
Sth prwth periptwsh pou kanei update thn karta,afou teleiwsei den tha kleiseis to gammaloader kai de tha bgaleis th karta.Tha pathseis apla to program na ksana programmatisei th karta gia deuterh fora.

[gascp]

Eyxaristo !
Anipomono na erthi h karta moy.

[gascp]

Paidia irthe h kartoyla moy. Thn programatisa, tin ebala stin Diablo alla den anoigoi ola ta kanalia (apo ta gnosta ellhnika). Kapoia anoigoi kapoia oxi. Mhpos ftaiei h modula ?

[brel]

Paidia irthe h kartoyla moy. Thn programatisa, tin ebala stin Diablo alla den anoigoi ola ta kanalia (apo ta gnosta ellhnika). Kapoia anoigoi kapoia oxi. Mhpos ftaiei h modula ?

Den exo Diablo,alla den tin vazeis kai kapou allou na deis an paizei?

[gascp]

H karta paizei mia xara alla ena kanali ti fora. Tha psakso na bro mia module i*..to original en to metaji an yparxei kapoio eidiko setup gia Diablo Light CAM kalodexoymeno

[brel]

H karta paizei mia xara alla ena kanali ti fora. Tha psakso na bro mia module i*..to original en to metaji an yparxei kapoio eidiko setup gia Diablo Light CAM kalodexoymeno

Ti ennoeis ena kanali ti fora?
Posa theleis na anoigeis kathe fora?
Se poio dekti vazeis tin module?
I irdeto tin paizei mia xara.
Dokimase kai se dekti pou tin pernei kateftheian.