Clark-Tech Firmware

[CurroHD]

Dr.HD F16 New Firmware 010p for Clarke Tech 5000 HD Combo Plus

English language in the menu.

NOTE: FW is not the usual team, so do not say "official" Not being official, is at your own risk installing this firmware!

1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

more Info here.

Download Firmware:
F16_DreLog_010p for Ctech.zip

[powercisco]

Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 241p for Clarke Tech 5000 HD Combo Plus

In the firmware test the following innovations:
- A new loader 500, allows you to unload not only the setting of the stick, but the very firmware.
- Unloading the setting of connections to external cards (CSinfo.txt) moved into the Software Update menu for convenience.
- Updated infobar (double-Info): a brief conclusion EPG is combined with the withdrawal of the extended EPG for ease of reading the contents of transmission.
- Updated default settings of satellites and transponders BISS keys (you need to reset all settings to the factory to start using them).
- Faster access to the menu, the green button - no annoying windows with warnings.
- Finalized mode Home balls through RS232: now uses a reliable manual selection mode receiver Master or Slave (Slave can be 6 doctors).
- Added selection algorithm with external cards in problem situations (by default, both the repeat is advisable to keep switched off to avoid the possibility of obtaining ban):
Retry = on / off (retry sending ECM after the end of time waiting for a response Timeout, with fast response and short time-out allows you to automatically detect the PID working or cid of several possible brute force with repetition);
Reloud = on / off (re-authorize the connection in case of failure on the server, it is useful when connecting to newcamd compatible server type mpcs, oscam .....)
- Amendments to working with Biss
- In the mode spectrum of the total added output signal power to quickly pre-assess the degree of targeting to the satellite.
- To further reduce response time to commands from the remote to navigate through the list of channels and on other menus. The doctor is a receiver with a really brisk menus.

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!

1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

[bozomustafa_68]

++ 2100plus-1500plus-2100-1500 ++
Hotbird 13E R a i key update
Astra 19E C a n a l + N L key update
Hellas 39E B u l s a t key update
Hotbird 13E T V G L O B O update
--------------------------------------
++ 3100 Plus - 2500 Plus ++
hotbird 13E R a i key update
Astra 19E C a n a l + N L key update
Hellas 39E B u l s a t key update
Hotbird 13E T V G L O B O update
Astra 19E T N T s a t
Sirius 5E S V T 1 etc..
Sirius 5E H u s l e r T V, etc..
Badr 26E V i a 2 . 6 channles support
AtlanticBird3 5W B I S T V
AtlanticBird1 12.5W D o c e l T V
--------------------------------------------------------------
++by Yabbervox++

[mikame]

F16 New Firmware 243p for Clarke Tech 5000 HD Combo Plus

- Acceleration shustrosti drawing of the spectrum, a new style of displaying the signal, until finished.
- Ability to call mode spectrum of any signal from the installation menus and select the frequency transponder
- A new algorithm for checking the availability of a new transponder with a pre-existing in the base of the satellite
- Amendments to download and display the TV Guide in infobare (enhanced mode OSD) menu and STV.
- Added ability to automatically change the date of the transition up or down button with the most recent transfer of the day following the first and back.
- Increased memory for loading guide, should be enough for 7 days.
- When viewing a list of records is optimized mapping of the transfer of TV Guide, if it had during its recording.
- Search for air channels made into a separate menu
- Added transparency to the menu cards and external BISS keys - for operational control of decoding.
- Small correction in the algorithm of rekonekta compounds
- Other improvements.

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

[sojebu]

F16 New Firmware 245p for Clarke Tech 5000 HD Combo Plus




Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 245p for Clarke Tech 5000 HD Combo Plus

- Using a new algorithm works with curves servers (from a test 070p), a description of configuration options in the next topic. Should be more stable than the 214th.
- Restored the possibility of determining caid = 2600 for BISS channels on the yellow button
- The red button is now used for direct call editor BISS keys. The ability to edit keys of other encodings stayed during unloading-loading via USB text file *. key

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!

1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

[powercisco]

Firmware Clarke Tech 5000 HD Combo Plus


F16 New Firmware 247p for Clarke Tech 5000 HD Combo Plus


- Repaired menu yellow button, broken with the 245p firmware. Now displays and BISS (caid = 2600) and is again the ability to manually bind the working RDA for faster channel switching time.
- Dorabotaka algorithms retry / reload. Now reload and the "right" time-out enable circumvention antikaskading constraints (useful for PVR functions).

[mikame]

New Firmware F16_248p for Clarke Tech 5000 HD Combo Plus

Changes:
- Memory EPG increased to 8 days
- Improved OSD style and algorithm update EPG for current and next transmission.
- Changes in the mode spectrum (the most important information is now more evident than with the service).
- Fix the display of some letters of the Ukrainian language in STV, the channel name and records
- other improvements, carried over from 104 to F15 ...

(scale of signal quality in decibels still under refinement ...)
beta status

[mikame]

New Firmware F16_250p for Clarke Tech 5000 HD Combo Plus

Changes:
- Insert new EMU Cryptoworks keys on Astra 19,2
- Changes in the EPG, Infobar, Records List

[bozomustafa_68]

O*R*F + A*U*S*T*R*I*A*S*A*T
+++by Yabbervox+++

[aamir11]

- T*N*T support- B*u*l*s*a*t update O*R*F/A*u*s*t*r*i*a*s*a*t support

+++by Yabbervox+++