Clark-Tech Firmware

[bozomustafa_68]

07.08.2009

Changes :
- tv globo Hotbird nagra2 au
- digi tv Thor nagra2 au
- biss_keys,seca2 keys updated
- New seca3 smartcard fixed

++Yabbervox++

[-dr-alb]

New original firmware Ctech5000/5000C/5000CPlus 1.79

Code:
-Added Dolby Digital Plus

-new pre programmed channellist more coming soon.

-Dolby Digital Plus added

- New pre-programmed channel list

[sami.sami]

Version 179p with EMU

- Only patched, no keys updated, no digi tv au !! 
- To build whole s/w with new structure is in process

[sami.sami]

Version 179p with EMU

- Only patched, no keys updated, no digi tv au !! 
- To build whole s/w with new structure is in process

[ar_sot]

JSC +1, +2 , +3 and +4 (Sept. 19th 100%) for Ctech 1500

• Transfer "Boot Ctech_1500 to SRT4620II.STB" using "SRTLoaderP1.92.exe".
• Turn of the receiver by using behind switch.
• Transfer "SRT4650_MyTV_220p_20090112.stb" using "SRTLoaderP1.92.exe".
• Press 6969 twice and watch JSC +1, +2 , +3 and +4 on NILESAT 100%
• If you want to rollback to Ctech brand, transfer "Boot SRT4620II to Ctech_1500.STB" using original Ctech loader, then transfer the latest Ctech patch.

[Tunimax]

digitv Thor nagra2 au fixed / RAI Hotbird seca fixed

[sami.sami]

New Firmware Clarke-Tech

*digitv Thor nagra2 au fixed
*RAI Hotbird seca fixed
++Yabbervox++

[sami.sami]

CTECH5000C Plus 2.04

New features:

• Supports "Dolby Digital Plus" Figure 1 / Figure 2
• Recording with subtitle Figure 3
• Max. 2 channels can be recorded at the same time Figure 4
• During the satellite channels being watched/recorded, the terrestrials channel can be
watched/recorded. (and vice versa) Figure 5
• Max. 3 channels can be descrambled at the same time ( watch 1 channel and record 2
channels ) Figure 5
• Timeshift now 1 hour (more coming soon) Figure 7
• Note: Instant Recording !! If start a recording directly and EPG data is present, the recording stop after the event !

[BIG BOBI]

New fw 204 for C-Tech5000C Plus with EMU

Release notes:

- Added cccam client
- Fixed emu JSC sports on Nilesat
- DigiTv on Thor
- TvGlobo on Hotbird
- RAI on Hotbird (by softcam seca key)
- KingSton on Sirius
- SABC on Intelsat 902,KDG

Update steps!!

1.Download software first wait until reboots.
2.Download module_002p wait until reboots.
3 Save your settings by USB or rs232
4.Make a factory reset and switch OFF (maunpower switch on the rear)the receiver for around 1 minute.
5.Receiver again turn on ,make an auto channel scan or upload the saved settings and make auto channel scan to upgrade the channellist etc...

Now you can also used hidden menu 8281 !!
More info about 8281 in the pdf document !

Info about new s/w core(Ver. 2.0x for HD5000c plus

1. Two channels recording at the same time and another channel watching.
2. Even though they are encrypted channels, they will be descrambled simultaneously.
3. During recording or watching satellite channels, the terrestrial channels can be watched or recorded, and vice versa.
4. In case of simulcrypted channels, all ecm’s of each slot (cards/cs/sssp/emu) will be processed in parallel, so that the channel open time will be shorter than old versions.
The old core tried ecm’s one by one in every 3 sec, so that at the worst case the channel open time is very long.
And they do not process all possible ecm’s, so some channels does not open.)
5. The size of old core software is very big. No more free space in flash memory to add the new features.
In this case the new software is compressed to half size and the booting time is same as old one.

++Yabbervox++

[sami.sami]

CTECH 5000C Plus FW 2.05 Original

Changelog version 1.02/2.05
-following solved
- sky germany > miltifeed option
- setting HDMI Dolby not stored
- audiotrack between channel zapping
- timer recording wrong start time
- end of timer recording not switched back in standby mode
- blindscan to set frequency range

following is in work / coming soon
- DVB-T/DTT descrampling support by CAM / CI module ( Samsungcam,Engel Cam GolTv Spain)
- start timer recording of 2 channels to the same time ! At the moment only by instant recording
- motor setting - to set limit
- parental control by receiver or CI module

new fearures added ( more details in pdf document )
- cut recording
- set EPG timer recording offset
- timeshift by HDD 120 minutes
- automatic timeshift > permanent by HDD
- bootmenu
- time Skip function (playback)

Notice concerning timer recording:
The following programming may be not within duration of the first timer recording . At the moment overlaps by timer not possible !!