Matrix Revolutions Cam.

[linkin]

quelq'un qui peut m'aider avec matrix revlutions modul svp?tous jours quand je le programme avec mon cas 2 programateur et puis je le met dan le reciveurpour regarder si ca marche je vais dans le menu de cammon interface et la dedans il n'y a que des zeros ecrits.vous savez quoi faire peutetre ?merci d'avance

linkin


anyone who know why I get only zeros when I program my matrix revolutions cam ?I look on TV in camon interface menu under edit cas key and there are only zeros even if I just programed it like it should?my friend programed it and it works very well but when I program it on my cas 2 programer it gives only zeros.please help.I program it like I shoud with mrv 225 for example and cas 2 but nothing hapends just zeros.any sugestions ?


linkin

[Marrek]

Axas is very similar to Matrix,so you can try to load Mrev soft to it but...on your own risk!

[Saoud007]

Axas = Matrix cam not Matrix revolution cam

Try to put Matrix Reloaded firmware on it

If you prog Matrix Revolution Firmware you need cas interface to back in MR

@+ Bons Tests

[lindoleal]

Throw this shit away. What is the meaning of it if not everything works.

[watergate]

Throw this shit away. What is the meaning of it if not everything works.

C'est pas gentil......ça c'est une mise à jour,c'est un update car les codes ne sont ni permanents ni éternels et à force d'en mettre par petites doses ton MRV va à un certain moment les cracher et les vomir....d'où le besoin d'un full update.....tout le secret est là et un big thanks pour ceux qui le font gratos!B-)

[markdutch]

doupas is there a
new bin file for mrv to watch cabo??my best regueards..

[Saoud007]

CIW Matrix File Converter 2.01 (CIW MFC 2.01)
(C)MASARE Team - Saoud007


12/09/2005 Version 2.01 Added ARJ32 registered version, now UPD to BIN function back


Options avalaible
- BIN to UPD
- UPD to BIN
- Funcard: Fun2, Fun3, Fun4, Fun5, Fun6, Fun7 (BIN & HEX Format)
DROP file option avalaible (BIN & UPD)
Default directory file production: MRFileProduce (created auto if not exist)
Working directory open auto after file creation.
Slide panel added (about software): Clic on slide panel in left to open, Stay out the windows during few secondes to close.


Error Messages:
-No File loaded
-When try to produce funcard from BIN file
-When missing Matrix.LDR file
-When missing ARJ32.EXE compressor


FILE CONVERTER
BIN to UPD & UPD to BIN
1-Run CIW MFC (Matrix File Converter)
3-Load File (BIN or UPD)
4-Select Destination Directory (working directory)
5-Clic on "Convert" button


PRODUCE FUNCARD
1-Run CIW MFC
2-Load UPD File
3-Select Destination Directory (working directory)
4-Select Funcard Type (Fun2 to Fun7)
5-Clic on "Funcard" button


BIN file & CAS Studio upgrade
1/-Run CIS
2/-Select Matrix cam (Reloaded or Revolution)
3/-Select Erase All
4/-Load File (Binary firmware = .BIN)
5/-Clic on Write Button
Cam updated with new firmware


UPD file & Serial Loader upgrade (=dummy card)
Select FTA Chanel
1-Run MRCrypt Revival (choose last version)
2-Clic on button "Matrix Serial Loader Programming"
3-Load UPD File
4-Select COM Port (ticks autodetect Com Port to see all port available in machine)
5-Select Baud Rate
6-In MENU select "SETUP->UPGRADE FIRMWARE" and Press OK in remote control
7-Wait message "Insert card 1 or serial dummy card"
8-Insert Dummy Card and wait 10 secs
9-Select "Dummy card" in menu ci & Press ok.
10-Wait the message "Performing serial download"
11-Clic on "Write" button to start programming
Setting saved when windows closed (\MRSettings\Serial.ini)
Cam updated with new firmware

After upgrade don't miss to update keys
Select FTA Chanel
Go to CI Menu
Select SETUP
Select SET DEFAULT KEY
Cam reboot auto (if not reboot auto after 30 secs, reboot manually)


Programming Funcard
Procedure Fun2,Fun3,Fun4,Fun5,Fun6:
1-Load Software programmer
2-Select Funcard (2,3,4,5,6)
3-Load Flash_For_Fun2_to_Fun6 in flash for each cards
4-Nothing in internal eeprom
5-Load mr_FUNX_Y in EEprom Ext.1
(mr=Matrix Reloaded or Matrix Revolution firmware)
(X=Funcard Type: FUN2,FUN3,FUN4,FUN5,FUN6)
(Y=Card Number)
6-Burn card


Procedure Fun7:

For 2 External eeprom
1-Load Software programmer
2-Select Funcard 7
3-For fun7 load Flash_For_Fun7.hex in flash
4-Nothing in internal eeprom
5-Load mr_FUN7_1.hex in EEprom Ext.1
6-Load mr_FUN7_2.hex in EEprom Ext.2
7-Burn card

For 1 External eeprom for infinity usb
1-Load Software programmer
2-Select Funcard 7
3-For fun7 load Flash_For_Fun7.hex in flash
4-Nothing in internal eeprom
5-Load mr_FUN7_1.BIN (NOT HEX) in EEprom Ext.1
When new windows appear
Clic on "(1)Span"
6-Burn card

For 1 External eeprom for other progger
1-Load Software programmer
2-Select Funcard 7
3-For fun7 load Flash_For_Fun7.hex in flash
4-Nothing in internal eeprom
5-Load mr_FUN7_1.BIN
6-Burn card


UPD file & Funcard upgrade
Select FTA Chanel
1-In MENU select "SETUP->UPGRADE FIRMWARE" and Press OK in remote control
2-Wait message "Insert card 1 or serial dummy card"
3-Insert first card, press OK with remote control
4-Downloading start
5-when finish a new message appear "card Downloded, EXTRACT IT & press ok"
6-Insert next card if needed (message appear in screen like "insert card#2 & press ok"
7-DownlOADing fisnish when message "Download complete. Copying image and re-booting." appear
8-Wait 30 secs for cam reboot auto or reboot manually
9-New version firmware appear in CI Menu
Cam updated with new firmware

After upgrade don't miss to update keys
Select FTA Chanel
Go to CI Menu
Select SETUP
Select SET DEFAULT KEY
Cam reboot auto (if not reboot auto after 30 secs, reboot manually)


Enjoy.

[Saoud007]

MRCrypt Revival 1.05
(C)MASARE Team - Saoud007


Version 1.05: (12/09/2005)
-Function UPD to BIN Fixed (ARJ32.EXE out of date patched)
-Somes modifications in Keys_Updated file produce: now ident number appear
-Softcam.key file -> sub ident nagra written


---------------------------------------------------------------------------------------------------------------
NEW TABLE 26/04 WORK ONLY WITH MRCRYPT REVIVAL 1.04 & NEXT VERSION
MRevTable.set updated for MRV223
---------------------------------------------------------------------------------------------------------------

KEYS EDITOR FOR MATRIX RELOADED & MATRIX REVOLUTION CAM


Supported versions
MR Versions:
Mr101, Mr102, Mr103, Mr104, Mr105, Mr1051, Mr1052, Mr1053, Mr1054, Mr1055, Mr1060, Mr107t, Mr1070, Mr1071, Mr1080, Mr1081,Mr110, Mr112, Mr113, Mr116, Mr1161, Mr1170, MR1180, MR1120, MR1220, MR1230

MRV Versions:
MRev 2.00, MRev 2.01, MRev 2.02, MRev 2.03, MRev 2.04, MRev 2.05, MRev 2.06, MRev 2.07, MRev 2.09, MRev 2.10, MRev 2.11, MRev 2.12, MRev 2.13, MRev 2.14, MRev 2.15, MRev 2.16, MRev 2.16OFF, MRev 2.17, MRev 2.18, MRev 2.19, MRev 2.20, MRev 2.21, MRev 2.22, MRev 2.23, MRev 2.24, MRev 2.25

Language File: English, French, Deutsch, Albanian, Portugues, Turkish, Italian, Arabic, Spanish
Default language in soft : English
All others Can be found in MRCrypt Revival-Language Pack 1.xx.Zip on add-on
Use SIL Editor in MRCrypt Revival-Language Editor to create new language.

SPECIAL THANK'S TO ALL GUYS FOR TRANSLATION
Nushi-Digiman-Miciobao-Zargana-AlfaSierra-Vento53

Themes File: 5 Themes used by default
All others themes files on add-on file Themes Pack01, Themes Pack02, Themes Pack03


Default MRCrypt Revival(MR) Directories
- MR BIN-UPD -> Store BIN & UPD File
- MRThemes -> Store Themes Application
- MRLanguages -> Multi language file directory
- MRFlashFile -> Flash For FUN2 to FUN6 & Flash For FUN7
Directory automatiquely created if not exist.
- MRFuncard -> EEprom for Fun2,Fun3,Fun4,Fun5,Fun6,Fun7
Directory automatiquely created if not exist.
- MRFileKeys -> MR_KEYS.TXT, IDENTS_LIST.TXT, MR_KEYS to SOFTCAM.KEY, SOFTCAM.KEY to MR_KEYS,
UPDATED_KEYS.TXT.
Directory automatiquely created if not exist.
Clic on "Open MRFileKeys" in MRCrypt Revival to open direcrory.
- MRDatas -> Idents Table
- MRTables -> Matrix Reloaded & Matrix Revolution Table
- MRSettings -> Com Port Settings stored in serial.ini file
(Com Port Autodetection, Port selected, Baud Rate)


Enjoy.

[Saoud007]

MRCrypt Revival QUICK HELP
(C) MASARE Team - Saoud007


Install:
1/-Select ZIP file
2/-Right Clic in file & Select "Extract to MRCrypt..."
3/-Create ShortCut in Desktop
4/-Double clic on ShortCut to start application


Default MRCrypt Revival(MR) Directories
- MR BIN-UPD -> Store BIN & UPD File
- MRThemes -> Store Themes Application
- MRLanguages -> Multi language file directory
- MRFlashFile -> Flash For FUN2 to FUN6 & Flash For FUN7
Directory automatiquely created if not exist.
- MRFuncard -> EEprom for Fun2,Fun3,Fun4,Fun5,Fun6,Fun7
Directory automatiquely created if not exist.
- MRFileKeys -> MR_KEYS.TXT, IDENTS_LIST.TXT, MR_KEYS to SOFTCAM.KEY, SOFTCAM.KEY to MR_KEYS,
UPDATED_KEYS.TXT.
Directory automatiquely created if not exist.
Clic on "Open MRFileKeys" in MRCrypt Revival to open direcrory.
- MRDatas -> Idents Table
- MRTables -> Matrix Reloaded & Matrix Revolution Table
- MRSettings -> Com Port Settings stored in serial.ini file
(Com Port Autodetection, Port selected, Baud Rate)



LOAD FILE
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Expand" button to view all ident in "System Crypt/Idents"
or
Use DROP file function
1/-Open your BIN folder
2/-Run MRCrypt
3/-Select file with mouse and dropt it main window
Now file is opened by MRCrypt Revival


SAVE FILE
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Make your changes
4-Clic on "Save" button -> BIN file saved & UPD file automatiquely created


SAVE AS
How to SAVE BIN & Create UPD in same time
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Make your changes
4-Clic on "Save As"
5-Enter a name or use default name selected
BIN File saved & UPD file created too
Default folder is MR BIN-UPD but you can select another one
Destination directory open automatiquely after file writing.


EDIT,MODIFY IDENT KEYS
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Expand" button to view all ident in "System Crypt/Idents"
4-Select an Ident to see keys
5-Make changes (Edit,Modify,Paste...)


CLEAR IDENT KEYS
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Expand" button to view all ident in "System Crypt/Idents"
4-Select an Ident to see keys
5-Clic on "Clear Current Keys"
All keys will be to zero.


EXPORT FIRMWARE KEYS
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Create MR_KEYS File & Idents_List File"
4-All keys will be saved in directory MRFilekeys,
this directory will be open automatiquely after file creation.
File created: MR_KEYS.TXT & IDENTS_LIST.TXT


IMPORT KEYS
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Import Keys"
4-Select type of import file
- Softcam file
- MR_KEYS (or DRA_KEYS or FUN_KEYS compatible file format: file produce by DragonCRypt & FunkeyEdit)
- Fun6in1
5-Load file
6-Expand Selected Keys:
Clic on "Expand All" to view all idents or double clic on System Crypt to open ident
Clic on "Select All" to select all keys in one pass or make individual selection (doucle clic on Ident)
Compare keys: select same idem in Import Keys windows and MR KEYS Windows
keys appears in Keys list
7-Clic on "Update Keys" to update new keys in Matrix firmware.
New Keys detected by import function added in File KEYS_UPDATED.TXT
File created automatiquely during update.


EDIT MR_KEYS FILE
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Edit/Convert MR KEYS File"
4-Load MR_KEYS.TXT
5-Edit,Modify or Convert to SOFTCAM keys file
6-Clic on "Save"
Destination directory will be open automatiquely after file creation.


EDIT SOFTCAM.KEY FILE
1-Run MRCrypt
2-Clic on "Edit/Convert MR KEYS File"
3-Load SoftCam.Key
4-Edit,Modify or Convert to MR_KEYS file
5-Clic on "Save"
Destination directory will be open automatiquely after file creation.


EDIT IDENT TABLE
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Edit Ident File"
4-Load INI file
5-ADD/DELETE/MODIFY/MOVE ident
6-Clic on "Save"
Treeview "System Crypt/Idents" will be updated with new ident and all file will be produce too.


REPLACE IDENT
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Select System Crypt in treeview (Nagravision,Seca,Viaccess,Irdeto,Conax)
4-Select Ident
5-Clic on Ident Combo Box and select new ident
Treeview & windows keys will be updated with new ident & new name


MOVE,CLEAR IDENT(S)
1-Run MRCrypt
2-Open MR\MRV Firmware
3-Clic on "Providers"
4-Select System Crypt (Nagravision,Seca,Viaccess)
5-UP Button: swap current ident with previous
DOWN Button: swap current ident with next
CLEAR Button: current ident clear to EMPTY and keys to 0
CLEAR ALL KEYS button: all idents keys in selected list to 0
CLEAR ALL Button: all idents in windows clear to EMPTY and keys to 0
Use space bar for quick move:
- Press space bar Select/Deselect ident
- Select new ident (left clic)
- Press space bar (ident swapped)
6-clic on "Update" to validate changes


KEY CONVERTER
1-Clic on "Convert Key"
2-Tick "HEX to DEC" or "DEC to HEX"
3-Input Key


PRODUCE FLASH FILE
1-Run MRCrypt
2-Clic on button "Produce FUN Flash"
3-File created in directory MRFlashFile.
Directory open automatiquely after creation files.
Flash_For_Fun2_to_Fun6.hex
Flash_For_Fun7.hex


MATRIX FILE CONVERTER
BIN to UPD & UPD to BIN
1-Run MRCrypt
2-Clic on button "Matrix File Converter"
3-Load File (BIN or UPD)
4-Select Destination Directory
5-Clic on "Create" button


PRODUCE FUNCARD
1-Run MRCrypt
2-Clic on button "Produce Funcard"
3-Load UPD File
4-Select Destination Directory
5-Select Funcard Type (Fun2 to Fun7)
6-Clic on "Create" button


SERIAL LOADER
1-Run MRCrypt
2-Clic on button "Matrix Serial Loader Programming"
3-Load UPD File
4-Select COM Port (ticks autodetect Com Port to see all port available in machine)
5-Select Baud Rate
6-In MENU select "SETUP->UPGRADE FIRMWARE" and Press OK in remote control
7-Wait message "Insert card 1 or serial dummy card"
8-Insert Dummy Card and wait 10 secs
9-Select "Dummy card" in menu ci & Press ok.
10-Wait the message "Performing serial download"
11-Clic on "Write" button to start programming
Setting saved when windows closed (\MRSettings\Serial.ini)


PHOENIX LOADER
1/-Run smartcard progger & select Funcard
2/-Load flash Fun7FlashLoader.hex & Burn only the flash
3/-Activate MODE PHOENIX 6.00 MHZ
4/-In MatrixPL select BIN file & Com Port & Funcard Type
5/-Press WRITE button. Wait downloading finish. Exit PHOENIX mode
6/-Load flash Flash_For_Fun2_to_Fun6.hex in flash for fun6
Load flash Flash_For_Fun7.hex in flash for fun7
Burn only the flash
Flash Fun7FlashLoader.hex in MRFlashFile Folder


LANGUAGES
How to change language interface
1-Run MRCrypt
2-In main menu Select option "SETTINGS"
3-Select Sub Menu "Languages"
4-Select Language file
Now Selected file language is used by default in software


THEMES
How to change software appareance
1-Run MRCrypt
2-In main menu Select option "SETTINGS"
3-Select Sub Menu "Themes"
4-Select Theme file
Now Selected file Theme is used by default

@+ Bons Tests

[whatsmydestiny]

hi

does polsat works on matrix revolutions?

plz if yes tell me where is the file?

thanks

:)