FLASH DUMP FOR skymaster dx24 TUNER: F7VZ0614

[ghani]

bitte, ich brauche flash dump, fur skymaster dx24 TUNER: F7VZ0614 :-[

[pire cemil]

skymaster Tx22 yes.

[geogeo]

I have a Skymaster DX 24 ZAR 8.0 RH2105 DG36/37/38 Tuner 46067A2F Art.Nr 39692.
After patch the tuner no signal and led for signal lighted. Please help.

[tracer13]

I believe you tryed tha patch for Strong 6125!
This patch is usedf only for the skymaster dx24 with tha 0194 sharp tunner !!!

You have to find a skymaster dx24 original flash dump file and jtag it to the sti5518 proccesor!

Good luck.............
I haven't found one yet................................

[leopeppe]

I've a clone of this receiver (sat+x9.1) and have the same problem...
the solution is the bootloader 4.7.1z for the zarlink tuner ... without JTAG uploading with bootloader.exe... but I don't know where I could find it...

[geogeo]

I believe you tryed tha patch for Strong 6125!
This patch is usedf only for the skymaster dx24 with tha 0194 sharp tunner !!!

You have to find a skymaster dx24 original flash dump file and jtag it to the sti5518 proccesor!

Good luck.............
I haven't found one yet................................

Thanks Tracer13. I find here and one month and nothing. This box is new and may by only for Greece & Turky. Thanks again.

[Moxo]

I've the solution for your problem. You must have a JTAG.
I've the *.bin file for this Receiver and the JTAG Program, This program is the same used on KAON Receiver, you must have to check the ST Flash Chip to select the correct one on the software.
Connect the Jtag flat cable to the receiver, atention the pin number 1.
Send me you mail and i give you all material yu will need (excep. JTAG Card), Fotos, etc...

[Satandreu]

Hi,

i´m looking for this dump. i´ve found some many dumps of this receiver, but they are for zarlink.

Someone can send me it?

Thank´s.

[Satandreu]

x pire cemil:

Where can i found Tx22?

thanks

[dominion]

try a flash dump for dx 23 maybe it working the procesor and tuner seems too be same of dx 24 you don't have to loose ,and if the recever its booting try to upgrade to original firmware on serial port,you must have a jtag programer ,keep me posted :) best regard`s dominion