I tried Newcs version 1.13 win xp !
But it did not find the card with your config.
amended to Phønix COM1
I will try in the d.b se if M2 is ok
I tried Newcs version 1.13 win xp !
But it did not find the card with your config.
amended to Phønix COM1
I will try in the d.b se if M2 is ok
this config is for dreambox and the cards on slot not for cardreader
Do anyone know if the m2+ card is working with Mgcamd in a dreambox 7000?
or does it need to be newCs?
Newcamd is ok now against Newcs and Cccam on the other D. 500S
But it may not work internally to the 500s with CCAM ..
NewcamD is ok on boc /sever.
'll Try older were Newcs now!
Drvirus ..
Are you 100% of M2 + cards work on older ver Newcs with your config?
(goggle translater)
Hi
M2+ and Cccam 2.09/Newcs 1.17 is ok on 7020
Newcs config:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
-->
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>Sci</type>
<node>/dev/sci0</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<priority>hard</priority>
<autosid>no</autosid>
<Seca-PPV>no</Seca-PPV>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
<device>
<name>upper</name>
<type>Sci</type>
<node>/dev/sci1</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10001</newcamd_port>
<priority>hard</priority>
<autosid>no</autosid>
<Seca-PPV>no</Seca-PPV>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10011</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>all</type>
<output>file,all</output>
<logfile>/tmp/newcs_log.txt</logfile>
<console_options></console_options>
<file_options>init,ecm,emm</file_options>
<udp_host>192.168.1.10</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>cardserv</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>local</name>
<password>local</password>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>
Cccam cfg:
N: 127.0.0.1 10000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Regards. Kean
Kean
ok, I may well try this at the 500s.
It is easier to find.
What is the config for Cccam?
Does it work well?
I hope it works in 500 S
(gogle translater)
Originally Posted by kean
Which sat system are you running Conax ? canal+
dr_virus
Have you tried M2 + and Cccam 2.09/Newcs 1.17?
Which box do you have ?
which sat system, run against m2 + ?
my friend it is very easy
i have 7020 dreambox and running nemesis 4.2 image
you have to download from there server newcs 1.14
then you will go to var/bin and you will make it 755
you will go to var tuxbox config and change the newcsrc6.xml file
delete what is inside and replace it with this
<?xml version="1.0"?>
<newCSconfig>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>root</name>
<password>dreambox</password>
<hostname>localhost</hostname>
<port>10000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<allow>lower</allow>
<rate>2</rate>
</newcamdserver>
</newCSconfig>
then go to your cccam.cfg and add this line
N: 127.0.0.1 10000 root dreambox 01 02 03 04 05 06 07 08 09 10 11 12 13 14
then in nemesis image you have to stop cccam start newcsrc6 and then start again cccam
it works perfect
Thanks it worked, thanks for all the help
Posting Permissions
Reply With Quote