Worldsat Tools

[barbichou]

Hi claris,

I forgot to ask you if you were using the last firmware for your 9900 NG4?

[CLARIS]

Hi Barbichou, I'm using FR-E-WS08_0210_d80_full_ng4.bin, is it the correct one ? Thanx

[CLARIS]

Hi Barbichou,
It's me again, sorry to disturb you. I did some other tests :I tried another soft called AES by Zuki57, same thing impossible to transfert the keys to the 9900, there is a message : communication pb with serial port. I flashed again FR-E-WS08_0210_d80_full_ng4.rar & nedro 5.14, I tried to transfert the keys with Zuki again, still same message : communication pb with serial port. I used in turn com1 & com2 for the tests. All the flashes work well but that's all, no tranfert is allowed. I don't know what to do any more, I'm afraid I've to give up.
Thanks again for yr help

[barbichou]

Hi Claris,

Try to upgrade your firmware in 2.20 (see in firmware section) for your 9900, i beleive that this is the end of your problem...

Have fun

[CLARIS]

Hi Barbichou,
Congratulations, you changed your colour.
Thanks to having worked on this matter. Unfortunately I coudn't find the new upgrade for the 9900 in firmware section, would you be kind to attach the said file as you use to do, it would be easier for me... more work for you, sorry. Thank you very much.

[barbichou]

Sorry, i forgot to post the file, now it's ok, you can play with your 9900 NG4

[CLARIS]

Hi Barbichou,
I'm quite embarassed, something which was working before's no more now. I've to explain you what I've done :
First test using Ciboxtools first & Nedrofun secondly :
1 - I flashed FR-E-WS08_0210_d80_full_ng4.bin, everything's ok
2 - I flashed FR-E-WS08_0220_d83_9900.bin, ok too
3 - I tryed to flash Nedro-516-9x00-cs-RS232.nfs, nothing happened. There was a message asking to reset the receiver, what I did, but it didn't go farther. The receiver display shows "Init" and that's all.
Second test using Ciboxtools :
1 - I flashed FR-E-WS08_0210_d80_full_ng4.bin, ok
2 - I flashed FR-E-WS08_0220_d83_9900.bin, ok too
3 - I flashed Nedro 5.14, ok
4 - I tryed to use Zuki57 that time, still the same message as before, I mean : Pb with serial port communication.
This is just to inform you that I could'nt make the things working despite your efforts, I'm very sorry. I just don't want to carry on those trials. Thank you very much for all that time you spent helping me, I appreciate.
Please keep beeing what you are because we need you. Congratulations again for your promotion because you deserve it and see you around.

[Vanou]

Hi Barbichou,

I've got the same problem than Claris (hi Claris).

With a Cherokee 9100 NG4 :
Firm Full_FR-E-CH19_0306_d93_9100 --> Ok.
Flash with the last Nedrofun --> Ok
But, when I click on "connect", it appears "problem of connection".
My cable comes directly from Worldsat (by MisterAffaires).

Thank you for all and sorry for my bad English.


Bonjour Barbichou et Claris,

J'ai le même problème avec un Cherokee NG4.
J'installe le Firm (Full_FR-E-CH19_0306_d93_9100) et je flash avec le dernier Nedrofun : pas de problèmes. Mais, quand je veux me connecter et aller sur "click me", il m'affiche "disponible" mais les clés restent à zéro et un message "Time out connection" (ou similaire) apparaît.
Le câble a été acheté chez Mister Affaires sur le conseil du constructeur.

Merci d'être là. Tu fais partie de ceux qui, pour moi, donnent un sens et une noblesse à l'Internet en partageant les connaisances et l'information (même si ça ne va pas toujours dans les deux sens).

[CLARIS]

@ Vanou
Hi Vanou be welcome.
Don't worry about your English it's quite understandable. Hope Barbichou will find the right solution to yr pb.
Regards

@ Barbichou,
Hi Barbichou,
I just want to add something : all the tests have been done unpluged from the TV set since that one is in another room quite far from the PC.
Regards

[frankiegoesto]

Bonjour Barbichou,

Merci pour tes précieux conseils,

Je viens d'effectuer la manip que tu as indiqué ci-dessous correctement, mais en fait, comment faire pour envoyer les clefs du web vers mon 9000 ng4 via satmessenger, je pense qu'il me manque quelque chose ?

merci d'avance.

frankiegoesto

Magic2nedro V1.0.

Combiné avec la réception par satmessenger vous permet de mettre à jour sans rien faire votre clé aes.

Testé sur cherokee 9000 NG4 avec firm2.10 et nedrosat 5.14.

Methode :
-installez satmessenger si ce n'est pas encore fait avec les codes fournis précédemment.
- envoyez le plugin magic2nedro dans le démo avec ciboxtool.
- paramètrez satmesseneger pour qu'ilefface automatiquement les messages les plus anciens automatiquement.
- paramètrez le démo pour qu'il reçoive les mails en mode veille.
- pour mettre à jour l'aes chaque jour : touche satmessenger, magictonedro s'affiche, recherche automatiquement le bon mail et patche le plugin nedrosat, vous n'avez rien d'autre à faire, pas besoin de consulter les mails ou de sauvegarder les clés.

Plus simple c'est impossible.

Have Fun

You must have satmessenger installed and it will upgrade your plugin nedrosat automatically.

test ok with cherokee 9000 NG4 with firmware 2.10 and plugin nedrosat 5.14.

How to :

- first install satmessenger with keys i still gave you.
- send magic2nedro in your stb with cibox tool.
- set parameters in satmessenger to delete automatically old mails
- set parameters in your stb to be able to receive mails in stand by mode
- to upgrade your aes key, just press satmessenger button on remote control, it will find alone the right mail and it will upgrade your aes key in your plugin, you don't have to read or delete mails or save keys, there is nothing else to do.

more simple is impossible.

Have fun