Gammacard_Update_Nova_200 81130

[djminato]

Use the emk 3.1 but not work, I see message 'Componet COMDLG32.OCX or one of its dependencies not correctly registered a file is missing or invalid'. Why? Please help...

here is complete 3.1 + 3.5 with ocx files missed in your pc

if you still have error message then copy these ocx files to windows\system32

[sathack69]

one card work as you say..only gr ..if i put 16/10 files works cy but no gr anymore...no problem with that...i make the same to another card and isn't working...as before...cy and half gr....mystery...

[djminato]

what STB you are using ? I`m using openbox x-600 with ukranian firmware 6800 its turbo for au any official smartcard and gamma card au working great its faster than humax 5400 , irdeto eurocam , freecam, and other multicas stb such as truman,starsat,echolink

[djminato]

note after updating 17-11 twice - go novacinema1 when it clear then gr ok
remove card and insert it into programer
use emk3.1
load gam 30-11 ( don`t erase anything ) then send to card
now before inserting gama into your box go to novacinema1 CY
insert card and wait 1 min if not work
turn off your box from main switch turn it on back
remove gamma from stb return it back
wait 1 min now it must work

[Selis]

I also got a problem... some on noval channels are OK.. some of them not working..
same with 2nd machine .. updated to last nova.. any idea?

[microch]

note after updating 17-11 twice - go novacinema1 when it clear then gr ok
remove card and insert it into programer
use emk3.1
load gam 30-11 ( don`t erase anything ) then send to card
now before inserting gama into your box go to novacinema1 CY
insert card and wait 1 min if not work
turn off your box from main switch turn it on back
remove gamma from stb return it back
wait 1 min now it must work

unfortunately can't get it to work. either only gr or only cy - hoping there will be an update like the 16.10 where both worked nicely.

[djminato]

you can use 16-10 file after the above using gamaloader 1.1 then gr+cy will work together

we used 17-11 then 30-11 for cards that not worked directly with 16-10 or work some and other not

another thing if you follow 17-11/30-11/then 16-10 the au will go faster and zapping will be fast

[microch]

you can use 16-10 file after the above using gamaloader 1.1 then gr+cy will work together

we used 17-11 then 30-11 for cards that not worked directly with 16-10 or work some and other not

another thing if you follow 17-11/30-11/then 16-10 the au will go faster and zapping will be fast

tks for helping - no luck for me though :(

1) i cleared card with gammaloader 1.1 and programmed 17-11 twice. into receiver and nocin 1 clears fast

2) card out receiver off. open emk2 - reset - load 16.10 - send to card

3) turn on receiver - nocin cy clears very fast - switch to nocin 1 gr nothing :(

will leave on gr for the night and if it does not clear will just use 17/11 for the gr stuff.

[esmeralda1]

hi m8 this files nova work ok gr

bat cypros dont work


to auto update the card live on
nova cinema 1

[zands]

Hi all,

I have tested all the files for Nova Gre/cy that are out there and have
found the the new update 20090211.rar is the best one.

With this file you just load it and both provider work fine.

NOW TO LOADED A NEW UPDATE

1. Open you Gamma Loader (Loader EMK-3.5)
2. Reset Card.
3. Go to Gamma Tools.
4. Clean Card.
5. Go to Lode Gamma.
6. Pick the file 20090211.rar (you should have saved this file in your desktop)
7. Go to Send to Card.
8. Now take the card out of your program and put it in your receiver.
9. Go to ALFA cy and let it AU for about 1 min.
10 After this both Provider will work.

Have fun.