Xsat Chat

[hhhjr]

Hello,First let me say thanks to koala2048 for the package with all that good info in there. Second,maybe someone can help me. I DL'ed the xsat 2_0_0 mfl file, Decrypted the mfl file, patched it with the D**H Network N2 key , calculated the checksum, and recrypted it. Then I flashed the reviver, by the way it is a XSAT 410. It comes up conditional access not supported message. I try to go into the parental code and enter 1111 to activate the EMU, I get a message that the code is invalid. I can use the default 1234 to access the parental code lock, and it infact locks the receiver, I can unlock the receiver with it also. If I go into the configuration menu to the preferences menu , and try to change the parental code I get code invalid, also tried to enter the 1111 to activate teh EMU, but to no avail. Any help would be apperaciated.
Thanks to all.

[hhhjr]

Ok Here is where I am at. I loaded the latest version posted above. Loaded the receiver with firmware and favorites. Booted the receiver. Erased the esisting channels. Set my LNB, edited the sat info. Did a exhaustive scan. The receiver was running with the emu running. I could not toggle it on or off with the parental code inputs. I could only lock or unlock the receiver. So I uploaded the firmware back to the computer, decrypted the firmware, edited the provider and the N2 key, recaculated the checksum (notsure if it calculated it correctly as the info is in french I belive) ,recrypted the firmware. Then I reloaded it back to the receiver. and now I do not get the emu running statement , I get conditional access not supported statement. Any Ideas? Thanks

[pepushkin]

Salut, cette version marche bien!

Seul probleme que je n arrive pas a desactiver l emulateur. Avec le code parental 3333, 2222 ou 1111, tout ce que je mets me donne "code invalide". :-[

Comment faire?

[chouchou]

code = 6931 il faut le remplacer avec 1111 ou 2222 ou 3333 celon ton choix

Au revoir

[pepushkin]

OK !!!

merci chouchou. Je ne suivais pas bien la procedure:

Au lieu d'appuyer sur la fleche vers le bas, après avoir mis l'ancien code, dans "modifier le code parental", j'appuyais sur OK.

[tjsmatt]

bonjour , je rencontre des problemes avec ce firmware et les autres du même type d'ailleurs!
le probleme est que je suis abonné a canalsat , canal+ et qu'avec le firm ému v2 , je ne peux pas passer d'une chaine tipis a une chaine canal+ ou canalsat , il me marque pas de droit alors que j'ai les droits forcement!
je suis obligé d'éteindre le xsat 410 et de le rallumer et la magie j'ai mes chaines canal+ canalsat mais si je zappe sur une chaine tipis et ben la j'ai droit a un message pas de droit (ou ecran noir).
d'ou vien le probleme?j'ai donc reinstallé avec un firm allcam +gold+c+ et la sa marche nickel!

est-ce parce que le firm contient des codes canalsat et que ma carte officielle aussi donc sa pourrait faire une erreur?

merci d'avance

[koala2048]

Salut

as tu tenté le dernier firm 85f le 2.0.3??? car justement un certain nombre de bugs ont été corrigés.

a+ koala

[fillipe]

;-O help firmware metronic livebox;-O

[Maverick59]

Ok Here is where I am at. I loaded the latest version posted above. Loaded the receiver with firmware and favorites. Booted the receiver. Erased the esisting channels. Set my LNB, edited the sat info. Did a exhaustive scan. The receiver was running with the emu running. I could not toggle it on or off with the parental code inputs. I could only lock or unlock the receiver. So I uploaded the firmware back to the computer, decrypted the firmware, edited the provider and the N2 key, recaculated the checksum (notsure if it calculated it correctly as the info is in french I belive) ,recrypted the firmware. Then I reloaded it back to the receiver. and now I do not get the emu running statement , I get conditional access not supported statement. Any Ideas? Thanks

OK, first, in ordert to activate the emu, you need to MODIFY the parental code. Don't activate parental lock, it's useless.

[hhhjr]

Maverick59, thanks for the reply. My problem is now that with the bin loaded in the ird unmodifyed i can toggle on and off the emu but after patching the keys, recalculating the checksum, and recrypting thr file, the receiver tells me conditional access not supported, I also have another problem the receiver I have has the LSI 2005 series chip, that from what i read the firmware to this model cannot be modifyed, but in fact I can write the firmware, but the craziest thing is that after i turn off the receiver and reapply the power the receiver will not boot it just hangs at Init on the led display. If I use the older firmware 1_0_49 I belive it is I can cycle the power no problem. But my main problem is the firmware will not run the emu after I patch it. I have also been told that I need to use a favorites list, dont know if that is true but I have tried it with no success. I don't know maybe this has not been verifyed working with D**h Network, but I try to understand how things work but this one has me wanting to flash the receiver with gasoline and a match. I must have flashed the receiver 500 times many times back to 1_0_49 when I cannot get the receiver to boot. Any help would be appreaciated.