Matrix rel tools

[urmans]

..::enjoy::..
...urmans...

[lezwez]

Matrix_Checker_0.59b
(C)MASARE Team - Saoud007


Check Matrix Reloaded & Matrix Revolution Firmware
Detect if firmware loaded is an original or a FAKE
Last Firmware datas for Matrix Reloaded stored in MatrixReloaded.txt
Last Firmware datas for Matrix Revolution stored in MatrixRevolution.txt

Datas File (TXT File) cam be updated by anyone.
Just enter id version and file size in same line, separate datas by '-' char (example when a new ORIGINAL firmware coming out).
Download update of this files ONLY from well known files guys/forum.


How to:
1/-Load firmware (Matrix Reloaded or Matrix Revolution)
2/-Load Datas File (MatrixReloaded.txt or MatrixRevolution.txt)
3/-Clic on "CHECK" Button.

PS: same function Include in MRCrypt Revival keys editor, impossible to edit fake file. Recommanded for the best security file

[lezwez]

Matrix Checker 0.60a Security Code
(C)MASARE Team - Saoud007


Version 0.60a SC:
-Added security code = ANTI CAM KILLER => Checksum code protection
CAID, Idents datas, Keys, RSA keys & AES key authorized in modification => All datas can't damage cam all the rest protected by the checksum.
Boxkey: if you modify boxkey assimilate to change code. Check the file before change boxkey with keys editor

-Added AES & RSA Keys check
Option actived only is Size file, Id Version & Checksum are same as file Loaded

-Datas files modified

How to detect a Code Change (=can destroy cam)
-Id Version is ok
-File Size is ok
-Bad checksum (mean code modified, can destroy cam)

EXAMPLE:
In File Loaded In Datas File
File Size 444 816 444 816 Same
ID Version Mrv 2.25 Mrv 2.25 Same
Checksum 0x10240EDF 0x7A26620E Checksum modified => Perhaps CAM KILLER

How to:
-------
1/-Load firmware (Matrix Reloaded or Matrix Revolution)
2/-Load Datas File (MatrixReloaded.txt or MatrixRevolution.txt)
3/-Clic on "CHECK" Button.

thanks to Saoud007

[andreas_al]

CIW Matrix File Converter 2.0 (MFC)

Options avalaible
- BIN to UPD
- UPD to BIN
- Funcard: Fun2, Fun3, Fun4, Fun5, Fun6, Fun7
DROP file option avalaible (BIN & UPD)
Default directory file production: MRFileProduce (created auto if not exist)
Working directory open auto after file creation.
Slide panel added (about software): Clic on slide panel in left to open, Stay out the windows during few secondes to close.


Error Messages:
-No File loaded
-When try to produce funcard from BIN file
-When missing Matrix.LDR file
-When missing ARJ32.EXE compressor/decompressor


FILE CONVERTER
--------------
BIN to UPD & UPD to BIN
1-Run CIW MFC (Matrix File Converter)
3-Load File (BIN or UPD)
4-Select Destination Directory (working directory)
5-Clic on "Convert" button


PRODUCE FUNCARD
-------------------------
1-Run CIW MFC
2-Load UPD File
3-Select Destination Directory (working directory)
4-Select Funcard Type (Fun2 to Fun7)
5-Clic on "Funcard" button


BIN file & CAS Studio upgrade
--------------------------------
1/-Run CIS
2/-Select Matrix cam (Reloaded or Revolution)
3/-Select Erase All
4/-Load File (Binary firmware = .BIN)
5/-Clic on Write Button
Cam updated with new firmware


UPD file & Serial Loader upgrade (=dummy card)
----------------------------------
Select FTA Chanel
1-Run MRCrypt Revival (choose last version)
2-Clic on button "Matrix Serial Loader Programming"
3-Load UPD File
4-Select COM Port (ticks autodetect Com Port to see all port available in machine)
5-Select Baud Rate
6-In MENU select "SETUP->UPGRADE FIRMWARE" and Press OK in remote control
7-Wait message "Insert card 1 or serial dummy card"
8-Insert Dummy Card and wait 10 secs
9-Select "Dummy card" in menu ci & Press ok.
10-Wait the message "Performing serial download"
11-Clic on "Write" button to start programming
Setting saved when windows closed (\MRSettings\Serial.ini)
Cam updated with new firmware

After upgrade don't miss to update keys
Select FTA Chanel
Go to CI Menu
Select SETUP
Select SET DEFAULT KEY
Cam reboot auto (if not reboot auto after 30 secs, reboot manually)


Programming Funcard
-----------------------
Procedure Fun2,Fun3,Fun4,Fun5,Fun6:
1-Load Software programmer
2-Select Funcard (2,3,4,5,6)
3-Load Flash_For_Fun2_to_Fun6 in flash for each cards
4-Nothing in internal eeprom
5-Load mr_FUNX_Y in EEprom Ext.1
(mr=Matrix Reloaded or Matrix Revolution firmware)
(X=Funcard Type: FUN2,FUN3,FUN4,FUN5,FUN6)
(Y=Card Number)
6-Burn card


Procedure Fun7:

For 2 External eeprom
1-Load Software programmer
2-Select Funcard 7
3-For fun7 load Flash_For_Fun7.hex in flash
4-Nothing in internal eeprom
5-Load mr_FUN7_1.hex in EEprom Ext.1
6-Load mr_FUN7_2.hex in EEprom Ext.2
7-Burn card

For 1 External eeprom for infinity usb
1-Load Software programmer
2-Select Funcard 7
3-For fun7 load Flash_For_Fun7.hex in flash
4-Nothing in internal eeprom
5-Load mr_FUN7_1.BIN (NOT HEX) in EEprom Ext.1
When new windows appear
Clic on "(1)Span"
6-Burn card

For 1 External eeprom for other progger
1-Load Software programmer
2-Select Funcard 7
3-For fun7 load Flash_For_Fun7.hex in flash
4-Nothing in internal eeprom
5-Load mr_FUN7_1.BIN
6-Burn card


UPD file & Funcard upgrade
-----------------------------
Select FTA Chanel
1-In MENU select "SETUP->UPGRADE FIRMWARE" and Press OK in remote control
2-Wait message "Insert card 1 or serial dummy card"
3-Insert first card, press OK with remote control
4-Downloading start
5-when finish a new message appear "card Downloded, EXTRACT IT & press ok"
6-Insert next card if needed (message appear in screen like "insert card#2 & press ok"
7-DownlOADing fisnish when message "Download complete. Copying image and re-booting." appear
8-Wait 30 secs for cam reboot auto or reboot manually
9-New version firmware appear in CI Menu
Cam updated with new firmware

After upgrade don't miss to update keys
Select FTA Chanel
Go to CI Menu
Select SETUP
Select SET DEFAULT KEY
Cam reboot auto (if not reboot auto after 30 secs, reboot manually)


Enjoy.

Thanks to Saoud007 and matrixteam

[andreas_al]

Matrix Keys Editor un programma uttile.

[andreas_al]

Version: 1.0.2.2.5

Fixes:
Card initialization problems (with endless loop)
Faster zapping

Extras:
Upd format now available, cas not more required.
Files for funcard 4,5,6 available.

Note:
On some cam/card combination there may still be initialization problems,
this is due to the architectural change reloaded/revolution.
Reflashing the xilinx chip will void the warranty and is not recommended.
Key Update is and will not be implemented, keep your digibox handy for that.
Also NVOD are and will not be implemented, do as same for key update.

[Levante]

Matrix Cam notebook text

[Levante]

Pcmcia tools for notebook


Regards

[chouchou]

matrix flash dumps for reloaded

[chouchou]

flash.hex pour la mise a jour de matrix avec funcard7