M-Vision General Information & settings

[Sat-TV]

Astra-Hotbird settings
45 east - 43 west settings

[Sat-TV]

M-Vision

Location of the Company: United Kingdom
Start of Digital Satellite Receiver Production: 2004
Type of Manufacturer: Retailer (mainly for UK market)

Website: http://www.mvisionreceiver.com/

[lezwez]

How to[

this will tell you how to load software onto the mv useing boxloader

first of all you need a null modem cable not a siral cable both ends must be female ports not one male one fem useing an adapter this will not work

first off connect the cable back of the pc download the lastest software which matches you;re reciver.

you will need winzip or winrar to open these files in most cases now once this is done extract to the destination of choise

you will also need a loader program which allows you to connect beetween the pc and the box its eaither named boxloader

now once you have done the same with the loader extracted bla bla bla

first off your reciver must be pluged in now open box load set the com port to 1 as this is defult if you have more than one com port set to which it is pluged by clicking setup comm now if a message appears saying conection error dont worry this is just crap

now open the ungrade software section click the file which is .bin extention this is the file which will upgrade the soft ware not the loader file

and now you should see a bunch of numbers passing by from around 0/500 and something next to this is error 0 if this stays 0 then good lol what am i on

now go make a cup of tea leave the reciver till is says on the front of it good or bood one or the other once this appears the jobs done the rest is boring its just numbers flashing on the front of the reciver DONT NOT SWITCH OFF OR REMOVE OR TAMPER WITH THIS UNTILL YOU SEE GOOD OR BOOD this is why i say make tea

[lezwez]

Updateing keys

1 Goto the channel
2 Press exit and then you get hot key
3 Press list ok and then you will get a big window
4 Find the key you want to change
5 Click list ok
6 Use the arrow keys around the list ok use the down arrow first
7 Enter the code
8 When you are done goto the button OK on the screen and press list ok

9 Then you will go back too the big window and then press exit and thats it.

**************************************** **********
Updateing the stb with Box loader.

To update the box, you will need a null cable. Here is how you update.

1. Plug in the stb and leave in stand by.
2. But the null cable from the computer to the stb.
3. Start up box loader.
4. Click update software
5. Find the new software you want to send to the stb.
6. Click on it and then click open.
7. Then you will see the screen on the computer of the box loader will start moveing, all so on the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as the box needs do do more you will see it count again and at the end you will see good in the window of the stb.

8. Turn off the stb and but it back on and see what the software it say in the window of the stb and if it say the one you have loaded you are done.
**************************************** **********
Updateing the stb with FCisUtl..

To update the box, you will need a null cable. Here is how you update.

1. Plug in the stb and leave in stand by.
2. But the null cable from the computer to the stb.
3. Start up FCisUtl..
4. Click update FCIS fireware
5. Do you want to connected say YES.
6. Click change
7. Find the new software you want to send to the stb.
8. Click on it and then click open.
9. Then you will see the screen on the computer of the box loader will start moveing, all so on the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as the box needs do do more you will see it count again and at the end you will see good in the window of the stb.

10. Turn off the stb and but it back on and see what the software it say in the window of the stb and if it say the one you have loaded you are done.


**************************************** **********
Turn on EMU

Power it off
and restart with tv.
Go to first menu level and key in 9999.
This is necessary to enable the emu.
If a smartcard item appears in the first level menu then you are ready to go
**************************************** **********
Turn off EMU

Go to first menu level and key in 0000.
And you will see the smart card go from the first menu level
You might have to press 0 more times than 4 to get it to work.
**************************************** **********

i have robbed this guide from somebody else the one i wrote is not as clear

[somaino]

je veus savoir le site pour les soft ware pour fs 1000

[trust]

Hello!!
I can,t find usb option in my receiver after i have updated new s/w with memory stick.please help how can i get bake ,usb option under utility.i hve m-vision 9080 usb recevier.

with best regards
trust

[martinr]

Hi Guys,
how can i Update my stb with a null modem cable and another stb.
Any help please.

[amar105]

activat TVM Maroc on Biss
for mvision
ECM PID: 0FFF
12.34.56.00.65.43.21.00

[beeoogee29]

how to[

this will tell you how to load software onto the mv useing boxloader

first of all you need a null modem cable not a siral cable both ends must be female ports not one male one fem useing an adapter this will not work

first off connect the cable back of the pc download the lastest software which matches you;re reciver.

You will need winzip or winrar to open these files in most cases now once this is done extract to the destination of choise

you will also need a loader program which allows you to connect beetween the pc and the box its eaither named boxloader

now once you have done the same with the loader extracted bla bla bla

first off your reciver must be pluged in now open box load set the com port to 1 as this is defult if you have more than one com port set to which it is pluged by clicking setup comm now if a message appears saying conection error dont worry this is just crap

now open the ungrade software section click the file which is .bin extention this is the file which will upgrade the soft ware not the loader file

and now you should see a bunch of numbers passing by from around 0/500 and something next to this is error 0 if this stays 0 then good lol what am i on

now go make a cup of tea leave the reciver till is says on the front of it good or bood one or the other once this appears the jobs done the rest is boring its just numbers flashing on the front of the reciver dont not switch off or remove or tamper with this untill you see good or bood this is why i say make tea

very goog massage there, thank you very much we will make a cup of tea whiles waiting