Latest Xcam Orion 320 Software

[zanzibare]

Xcam is back under the old Gagliostro support
Great news for this release; we have also TPS in XCAM.
We have used a new bootloader smaller than the old one; so now the cam OWN more flash space for the big TSP key Bundle.
HOW TO UPDATE:
Use the Orion serial loader inside the zip;

1) select block 1
2) cancel the 1 of block 1 with the mouse button and write instead 0
3) so now you have the block zero
4) select the new bootloader xcloader.xcr
5) then connect and update the bootloader to the block 0
6) After updated at the restart select block 2 and update the software Orion 320.bix
7) as needed update softcamkey at block 14

Xcam open now:
Premiere
Digitv
Tps
Sgr
Polsat
and other minor bouquets
Xcam read Nds card Italy and UK

Enjoy the never die XCAM

[buzz777]

I have read a couple of posts about the difference between the xcam with orion processor and the xcam with angel processor.

Unfortunately I have the angel processor!

I have a question or two which would settle my doubts forever

1. Is it possible to load the new bootloader in the Block 0 of the Xcam with angel processor, and would it make any difference?

2. If I use the latest keys available for the Xcam 1.50 in block 14, what bouquets would not be in the dark?

3. Is there a possibility that the Xcam with angel processor is once more supported? Or do I find a nice place in the basement store for it?

Thanks for all the support and hard work.

[Dias1]

i did the procedure above.
It seems now that i cannot upload nothing from pcmcia ????
why? Isn't this bootload support pcmcia ?

[-=OursO=-]

Hello,

redlight Itali and redlight XXX its ok with this firmware ?

Thanks

[benjito_ecb]

redlight Itali and redlight XXX (mix)

freeze after 1 o 2 min whit my x-cam

[-=OursO=-]

redlight Itali and redlight XXX (mix)

freeze after 1 o 2 min whit my x-cam

Yes freeze after 1 or 2 min !!!!!

[-=OursO=-]

i did the procedure above.
It seems now that i cannot upload nothing from pcmcia ????
why? Isn't this bootload support pcmcia ?

Use only CAS 3 !!!

[-=OursO=-]

Xcam is back under the old Gagliostro support
Great news for this release; we have also TPS in XCAM.
We have used a new bootloader smaller than the old one; so now the cam OWN more flash space for the big TSP key Bundle.
HOW TO UPDATE:
Use the Orion serial loader inside the zip;

1) select block 1
2) cancel the 1 of block 1 with the mouse button and write instead 0
3) so now you have the block zero
4) select the new bootloader xcloader.xcr
5) then connect and update the bootloader to the block 0
6) After updated at the restart select block 2 and update the software Orion 320.bix
7) as needed update softcamkey at block 14

Xcam open now:
Premiere
Digitv
Tps
Sgr
Polsat
and other minor bouquets
Xcam read Nds card Italy and UK

Enjoy the never die XCAM

TPS and Multi is Out with this Bundle!!!
have you a new softcam.key or a files.bix ?

[setrixdigital]

Still freezeeeeeeeeeeeeeeeeeeeeeeee

[morino]

ciao a tutti io ho fatto i quel modo con il dualab 3 ma dopo messo il load.rom nello 0 non la ri conoscie piu come posso rimediare per far rivivere la mia xcam platinum grazie a tutti