Please help :( gemini 4.6 to PLi

[srood123]

My Dm 500s just went black when i tried to change a image via router. I had gemini 4.6 and I wanted change it to Pli image, it erased and upload the new image then went black.
Now the Dm just black nothing happen, the power is on just 5 min and then off:(. I cant access my Dm anymore via router, what is the solution ???
PLEASE need your help. I have just laptop at home I dont think I can use the null modem cable to my laptop, if there any way that i can reflash my Dm500 pplease let me know ,,
thank you

[RED B.]

Try to flash your DM again via COM port.

Good luck!

[srood123]

I cant use null modem cable to my laptop, because my laptop is a new version so the null modem from DM doesnt fit to my laptop. It there any other way to flash my dm again?

[chouchou]

Use usb-com cable

[marusha]

hello

It is your only Chance with the Com Port.

Jou must Bye an USB to Com adapter.

Ans then via Dreamup load the Pli Images not via Router.

Good luck,

[srood123]

If I by Use usb-com cable when i connect the usb to my laptop does it need to find the harddrive before i use dreamup?

Because if you put any usb in pc it will ask if you want to install the driver or not.

When I use the dreamup program do I use com 3 , com 4 or com 5? how do i know I have choosen right Com when I use usb???

Thank you for your help guys

[RED B.]

It depends on the model of USB -> COM port adapter (cable) but you will probably need to install some drivers.
After that - make the setup of the adapter (COM port setup 1 or 2 or 3 or...)
Then check in device manager of the computer if is everything settuped correctly.
Start dreamup and use the com port that you settuped for the usb-com port adapter.
That's it.

[srood123]

Thank you guys my Dm is back and I flashed with Pli :). I had Gemini I didnt liked :) ,,, Thank u all :)