DM7025+ kai Gamma kai Infinity USB Smart

[creta]

Pos doulevei seiriako kai usb me cccam:

Seiriako1
SERIAL READER : /dev/ttyS0
Seiriako2
SERIAL READER : /dev/ttyS1
USB
SERIAL READER : /dev/ttyUSB0

Sto image tis Dreambox gia seiriako -> Don't open serial port = YES
Sto image tis Dreambox gia usb -> install drivers

To Reader sta 6MHz

Sto cccam.cfg an einai seiriako
SERIAL READER : /dev/tts/0
TRY ALL CHIDS : /dev/tts/0
DISABLE EMM : no
EXTRA EMM LEVEL : yes
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

An einai usb
SERIAL READER : /dev/ttyUSB0
TRY ALL CHIDS : /dev/ttyUSB0
DISABLE EMM : no
EXTRA EMM LEVEL : yes
CAMKEY: /dev/ttyUSB0 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

[creta]

Οταν βαζετε το infinity στην θυρα usb του dreambox, μπειτε στο cccam server (http//ip dreambox:16001) και πηγενεται στο entitlements να δειτε αν την βλεπει το μηχανημα.

Ta entitlements apo cccam ehoun arketa lathakia kai den deihnoun
ta panta. Opoios thelei na dei an to reader diavazei tin karta
kalytera na dokimasei me to programmataki cardexplorer tou
mrtoolate.

[nicosx]

gia sas kai sas efharisto olous gia ta post pou grapsate, alla akomi fos den ida!!!

O kataskevastis lei auta

========================================
Infinity USB Smart (Smart VCP module) guide for Linux

It is possible to use the Infinity USB Smart (Smart VCP module) directly on Linux, a DreamBox or other Linux based embedded systems. A serial port ('/dev/ttyusb0' or '/dev/usb/tts/0') will be created as soon as the Infinity USB Smart is connected to the USB port on the Linux based system.

This guide explains how to install the Smart VCP module and connect the Infinity USB Smart on a Linux based PC, a DreamBox or any other Linux based embedded system, for instance a set-top box (STB).


1.Set the switch on the bottom of the device to the "NORMAL" position.

2.Connect the Infinity USB Smart to a Windows PC.

3.Default drivers for Infinity USB Smart will install automatically if needed.

4.Install the Infinity USB Smart software, and run the software when done.

5.From the menu select "Tools->Install module".

6.Select the "Smart VCP 3.58MHz Smartmouse" module.

7.Press "Update".

8.A few seconds later the module will be installed.

9.Close the software and disconnect the Infinity USB Smart from the PC.

10.Set the switch on the bottom of the device to "MODULE".


Most Linux distributions and DreamBox images have USB serial drivers included. Simply connect the USB cable to the STB or PC and a serial port will be available as either '/dev/usb/tts/0' or '/dev/ttyusb0'.

======================================== =====
Ola auta ta exo kani kata lexi!!!

autos o programer ehi apokato ena switch (normal kai module).

ton programatizo opos lei o kataskevastis ton enoono stin usb tou db7025+ kai anavi to lampaki tou.

pos mporo na elexo to device id tou pire apo to linux? '/dev/usb/tts/0' or '/dev/ttyusb0'

As me voithisi kapios na do fos re pedia!!!

kai kati akomi exo gemini 4.1 gia DM7025+

[kahkon]

gia sas kai sas efharisto olous gia ta post pou grapsate, alla akomi fos den ida!!!

O kataskevastis lei auta

========================================
Infinity USB Smart (Smart VCP module) guide for Linux

It is possible to use the Infinity USB Smart (Smart VCP module) directly on Linux, a DreamBox or other Linux based embedded systems. A serial port ('/dev/ttyusb0' or '/dev/usb/tts/0') will be created as soon as the Infinity USB Smart is connected to the USB port on the Linux based system.

This guide explains how to install the Smart VCP module and connect the Infinity USB Smart on a Linux based PC, a DreamBox or any other Linux based embedded system, for instance a set-top box (STB).


1.Set the switch on the bottom of the device to the "NORMAL" position.

2.Connect the Infinity USB Smart to a Windows PC.

3.Default drivers for Infinity USB Smart will install automatically if needed.

4.Install the Infinity USB Smart software, and run the software when done.

5.From the menu select "Tools->Install module".

6.Select the "Smart VCP 3.58MHz Smartmouse" module.

7.Press "Update".

8.A few seconds later the module will be installed.

9.Close the software and disconnect the Infinity USB Smart from the PC.

10.Set the switch on the bottom of the device to "MODULE".


Most Linux distributions and DreamBox images have USB serial drivers included. Simply connect the USB cable to the STB or PC and a serial port will be available as either '/dev/usb/tts/0' or '/dev/ttyusb0'.

======================================== =====
Ola auta ta exo kani kata lexi!!!

autos o programer ehi apokato ena switch (normal kai module).

ton programatizo opos lei o kataskevastis ton enoono stin usb tou db7025+ kai anavi to lampaki tou.

pos mporo na elexo to device id tou pire apo to linux? '/dev/usb/tts/0' or '/dev/ttyusb0'

As me voithisi kapios na do fos re pedia!!!

kai kati akomi exo gemini 4.1 gia DM7025+

kalispera .1 kane check tin gamma se dekti patatasat ean paizei
2. kane chek to cccam ean ehei to sosto configuration
3.sidese ton programmer sto P.C kai sto phonic vale 6mhz ohi smart-usb gable
4.to serial kalodio prepei na einai to sosto kai sindedemeno sto dekti kai sto reader-programmer
good etertainment :)
p.s simera kano polla orthografika lathi sorry

[xaniaras]

pedes ego exo ena infinity usb apo ta ksevrakota mono
plaketa x0ris kapakia an katalavate .. epoxes funcard
exo kani ta pada ...exo kani oles tis ru8miseis pou vrika sta
forum kai sto net...alla arnite na doulepsi ston 7020 den
katexo ti ginete ston 7025...kai apo ti katalava
arketoi ksenoi kai ellines malon paidevonte akomh..
opiadipote lysh einai dekth ...episis kai me pio image
to kataferate einai shmantiko

[xaniaras]

ston 7020 douleuei teleia.....
Ali8eia pou 8imikes tin func**d ?????????

nomizo oti to programer afto htan ka8ara gia fun

3 erotisis

1-isxyoun oi ru8misis tou filou pio pano gia to cccam.config?
2-me pio software fortoni gamma ?(exo kairo na psakso sto net)
3-ti ginete me ta mhz ..nomizo oti 8elei to software na paei 6mhz h oxi?
ante na doume aurio pou exoume xrono ti psaria pianh to infinity
to exo kapou petameno ..to 8eorousa AXRHSTO

[pantnick]

ego afou akousa oti den doulevei to phoenix me ton 7025 pareigeila ena smago usb reader... Mi mou peite oti k afto den doulevei giati to kano mantalaki gia ta rouxa.
A k kati allo... me ta parakato tha einai ok?

################## smartreader+ ##################
SERIAL READER : /dev/usb/tts/0 smartreader+
TRY ALL CHIDS : /dev/usb/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6800000
######################################## ########

[creta]

* xaniaras
kane install ta analoga .ipk paketa gia usb kai tha deis oti
to phoenix doulevei

* pantnick
to idio kai esy gia to smargo
6,8Mhz mono an einai skoteino sta 6Mhz
des kai tis allages sto boot file pou to vriskeis sta arheia tou smargo
-- ksehasa..
oi 3 grammes sou einai ok an kai to sosto
gia 6,8 ston smargo einai 6860002 alla katalavainei kai to 6800000

[xaniaras]

* xaniaras
kane install ta analoga .ipk paketa gia usb kai tha deis oti
to phoenix doulevei

kana link me etoima .ipk
an 8es edo h me pm.

[creta]

sou esteila to link gia 7020 kai 7025

me telnet sto dream
run "ipkg install kernel-module-ftdi-sio"
kleise to telnet
metonomase to original bootup sto /etc/init.d/ gia sigouria
perase to bootup sto /etc/init.d/
reboot
syndese to reader kai tin karta
allaxe kai to cfg tis cccam

kali tyhi!