Barry Allen Latest Version

[fushkrujs]

Barry Allen 6.2.3

Barry Allen Kit 6.2 veröffentlicht & Support Thema
Hier Ist Das Changelog for the Version 6.2.3 von Barry Allen.

* Das Ist Eine releaste Version wieder in der bekannten Bugs Alle Höhle aus früheren versionen gefixed seins sollten, Womit Alle früheren versionen NICHT MEHR unterstützten Sindh.

* Das Abbrechen klicken des Backups IST jetzt wieder gefixed

Auch der Wally West-Support scheint jetzt stabil zu Sein und IST DAMIT freigegeben. Infos und DAZU Den WW-Kit Findet Ihr im WW Thread:

Wally West für Barry Allen 6,2 6,2

* This Version Läuft NUR POUVOIR ursprünglichen Loader # 84 von DMM (bei der 7025 Kann man es DAHER NUR mehr mit Loader und 83 DM für Schummel ipk Loder 84 benutzen available Das hier anhängt). Ausnahme IST sterben DM7020HD, da MUSS jetzt bereits Loader # 86 Auf der Box seins

* Beim BA 6,2 WIRD der Loop-Device Treiber NICHT MEHR nachladen, Weil der BA 6,2-Kit für IST-Bilder> = 3.2.2 Den Release-Images Gedacht Wo der Loop-Device Treiber im Kernel Schon fix IST. WENN KEIN Mann aktuelles Bild mit Loop-Gerät Treiber im Kernel WIRD IM Flash Hut der BA 6,2-Kit sterben Einbau DAHER verweigern!

* Der / MB_Images Link deutet ab jetzt auf / media / hdd / backup oder / media / ba / backup

* Das BA WebIF Geht jetzt NUR mehr mit aktuellem ImageWebIF DAFÜR IST ES Aber bei Dortmund Höhle Extras zu Finden. Direkter aufruf mit http://ip.deiner.dream.box/barryallen Geht NATÜRLICH weiterhin.

* Der Geräte-Etikett des BA-Geräte jetzt IST NICHT MEHR BA und BA - stirbt WIRD Beim updaten Auf 6,2 Automatisch adapted.

* For the Leute Denen sterben im Layout 3 / media/ba/ba/1..8 Mounts Verloren gegangen Sind aus irgendwelchen Grunden (chroot, ...) Habe ICH jetzt Noch ein bainit 900 reingemacht Das Nür Alle Imagepartitionen remountet

* Der Bootmanager Hut jetzt WENN Mann WW mit FAT für Höhle Imagekernel verwendet (egal ob Layout 2 oder 3) und NEBEN enable deaktivieren Noch Éinen 3. Zustand: Wobble

Das Funktioniert so das Man WENN Mann WW mit FAT verwendet Den Bootmanager aufgedreht Hut und TROTZDEM der Imagekernel verwendet WIRD DEM Flashkernel statt.

Dann fällt der Mensch im Bootmanager Ein Anderes Bild auswählt ALS Das zuletzt gebootete (Dessen Kernel liegt im FAT) Dann WIRD Noch Schnell Das FAT POUVOIR Neuen Kernel und Bootlogo befüllt, ABER sterben Box sofort neugestartet und Das neue Bild Gleich Einmal ohne Bootmanager gebootet hat mit seinem eigenen Kernel Aus dem FAT. Beim Nachsten Boot ist der BootManger Aber wieder ein und so fort.

Betriebsräte von EADS Namen der Wobble

Und Die Anleitung von romeo-golf 6 für Barry Allen is also available es hier:

Barry Allen Anleitung

LG
gutemine

[fushkrujs]

Barry Allen 6.2.4

Barry Allen Kit 6.2 Released & Support Thread
Here is the changelog for version 6.2.4 of Barry Allen.

* This again is a releaste version in which all known bugs from previous versions should be now fixed, so all previous versions are no longer supported.

* Canceling the backup is now fixed again

* You can now for the first time just to test the resolution of the boot menu of boot manager in the BA switch settings

Also the support Wally West now seems to be stable and is Released. Information and to find the kit WW WW in your thread:

Wally West 6.2 for Barry Allen 6.2

* This version is compatible ONLY with the original loader # 84 of DMM (on the 7025 so it can be more ONLY with loader 83 and the ipk for cheating 84 Loder also use the append here). An exception is the DM7020HD because now MUST be already Loader # 86 on the Box

* The BA 6.2 is the loop device driver will NOT recharge, because of BA's Kit 6.2 for Images> = 3.2.2 release of the images meant where the loop device driver has already been fixed in the kernel. If you have NO current image with loop device driver in the kernel in the flash of BA 6.2 is therefore refuse to install kit!

* The / MB_Images link now points to / media / hdd / backup or / media / ba / backup

*, The BA is now ONLY WebIF with more current ImageWebIF but it is there to be found in the extras. Direct call with http://ip.deiner.dream.box/barryallen of course continue.

* Label the device of the devices is now ba BA and BA no longer - this will be adjusted automatically when updating to 6.2.

* For those people who are in Layout 3 / mounts media/ba/ba/1..8 gone lost for any reason (chroot, ...), I have now made a purely bainit 900 remounted the only all image partitions

* The boot manager has now if you use WW with FAT for the kernel image (either layout 2 or 3) in addition to enable and disable even a 3rd Condition: wobble

It works like the one when WW with the FAT boot manager used has turned up and STILL the kernel image is used instead of the flash kernel.

If you then boot manager for a new image selects as the last booted (its kernel in the FAT is) then is filled or quickly the FAT with the new kernel and boot logos, BUT reboot the box immediately and the new image the same once booted without a boot manager with his own kernel from the FAT. The next time you boot the boot manager is back on and so forth.

Hence the name wobble

And the guidance of Barry Allen romeo-golf there are 6 here:

Barry Allen instruction

LG
gutemine

[fushkrujs]

Barry Allen 6.2.5

Barry Allen Kit 6.2 Released & Support Thread
Here is the changelog for version 6.2.5 of Barry Allen.

* This again is a releaste version in which all known bugs from previous versions should be now fixed, so all previous versions are no longer supported.

* Canceling the backup is now fixed again

* The patch for the software update fstab should work stable

* You can now for the first time just to test the resolution of the boot menu of boot manager in the BA switch settings

Also the support Wally West now seems to be stable and is Released. Information and to find the kit WW WW in your thread:

Wally West 6.2 for Barry Allen 6.2

* This version is compatible ONLY with the original loader # 84 of DMM (on the 7025 so it can be more ONLY with loader 83 and the ipk for cheating 84 Loder also use the append here). An exception is the DM7020HD because now MUST be already Loader # 86 on the Box

* The BA 6.2 is the loop device driver will NOT recharge, because of BA's Kit 6.2 for Images> = 3.2.2 release of the images meant where the loop device driver has already been fixed in the kernel. If you have NO current image with loop device driver in the kernel in the flash of BA 6.2 is therefore refuse to install kit!

* The / MB_Images link now points to / media / hdd / backup or / media / ba / backup

*, The BA is now ONLY WebIF with more current ImageWebIF but it is there to be found in the extras. Direct call with http://ip.deiner.dream.box/barryallen of course continue.

* Label the device of the devices is now ba BA and BA no longer - this will be adjusted automatically when updating to 6.2.

* For those people who are in Layout 3 / mounts media/ba/ba/1..8 gone lost for any reason (chroot, ...), I have now made a purely bainit 900 remounted the only all image partitions

* The boot manager has now if you use WW with FAT for the kernel image (either layout 2 or 3) in addition to enable and disable even a 3rd Condition: wobble

It works like the one when WW with the FAT boot manager used has turned up and STILL the kernel image is used instead of the flash kernel.

If you then boot manager for a new image selects as the last booted (its kernel in the FAT is) then is filled or quickly the FAT with the new kernel and boot logos, BUT reboot the box immediately and the new image the same once booted without a boot manager with his own kernel from the FAT. The next time you boot the boot manager is back on and so forth.

Hence the name wobble

And the guidance of Barry Allen romeo-golf there are 6 here:

Barry Allen instruction

LG
gutemine

[keno135]

Barry Allen 6.2.6

Hier ist das Changelog für die Version 6.2.6 von Barry Allen.

* Das ist wieder eine releaste Version in der alle bekannten Bugs aus den früheren Versionen gefixed sein sollten, womit alle früheren Versionen nicht mehr supported sind.* die Probleme mit manchen Sprachversionen sollten jetzt wieder gefixed sein* das Abbrechen des Backups ist jetzt wieder gefixed* das patchen der fstab für Softwareupdates sollte jetzt stabiler funktionieren* man kann jetzt erstmals nur zum Testen die Auflösung des Bootmenus des Bootmanagers in den BA Einstellungen umstellenAuch der Wally West Support scheint jetzt stabil zu sein und ist damit Released. Infos dazu und den WW kit findet Ihr im WW Thread:Wally West 6.2 für Barry Allen 6.2* Diese Version läuft NUR mit dem original Loader #84 von DMM (bei der 7025 kann man es daher NUR mehr mit Loader 83 und dem Schummel ipk für Loder 84 benutzen das auch hier anhängt). Ausnahme ist die dm7020HD, da MUSS jetzt bereits Loader #86 auf der Box sein* Beim BA 6.2 wird der loop device Treiber NICHT mehr nachladen, weil der BA 6.2 kit ist für Images >= den 3.2.2 release Images gedacht wo der loop device Treiber schon fix im Kernel ist. Wenn man KEIN aktuelles Image mit Loop device Treiber im Kernel im Flash hat wird der BA 6.2 kit die Installation daher verweigern !* der /MB_Images link deutet ab jetzt auf /media/hdd/backup oder /media/ba/backup* das BA WebIF geht jetzt NUR mehr mit aktuellem ImageWebIF dafür ist es aber dort bei den Extras zu finden. Direkter Aufruf mit http://ip.deiner.dream.box/barryallen geht natürlich weiterhin.* der Device Label des BA devices ist jetzt ba und nicht mehr BA - dies wird beim Updaten auf 6.2 automatisch angepasst.* für die Leute denen im Layout 3 die /media/ba/ba/1..8 mounts verloren gegangen sind aus irgendwelchen Gründen (chroot,...) habe ich jetzt noch ein bainit 900 reingemacht das nur alle Imagepartitionen remountet* der Bootmanager hat jetzt wenn man WW mit FAT für den Imagekernel verwendet (egal ob Layout 2 oder 3) neben enable und disable noch einen 3. Zustand: wobbleDas funktioniert so das man wenn man WW mit FAT verwendet den bootmanager aufgedreht hat und TROTZDEM der Imagekernel verwendet wird statt dem Flashkernel.Falls man dann im Bootmanager ein anderes Image auswählt als das zuletzt gebootete (dessen Kernel im FAT liegt) dann wird noch schnell das FAT mit dem neuen Kernel und Bootlogos befüllt, ABER die Box sofort rebootet und das neue Image gleich einmal ohne Bootmanager gebootet mit seinem eigenen Kernel aus dem FAT. Beim nächsten Boot ist der Bootmanger aber wieder an und so fort.Daher der Name wobble LG

gutemine

[fushkrujs]

Barry Allen 6.2.7

Barry Allen Kit 6.2 Released & Support Thread
Here is the changelog for version 6.2.7 of Barry Allen.

* This again is a releaste version in which all known bugs from previous versions should be now fixed, so all previous versions are no longer supported.

* Problems with some language versions should now be back to gefixed

* Canceling the backup is now fixed again

* The patch for the software update fstab should work stable

* You can now for the first time just to test the resolution of the boot menu of boot manager in the BA switch settings

Also the support Wally West now seems to be stable and is Released. Information and to find the kit WW WW in your thread:

Wally West 6.2 for Barry Allen 6.2

* This version is compatible ONLY with the original loader # 84 of DMM (on the 7025 so it can be more ONLY with loader 83 and the ipk for cheating 84 Loder also use the append here). An exception is the DM7020HD because now MUST be already Loader # 86 on the Box

* The BA 6.2 is the loop device driver will NOT recharge, because of BA's Kit 6.2 for Images> = 3.2.2 release of the images meant where the loop device driver has already been fixed in the kernel. If you have NO current image with loop device driver in the kernel in the flash of BA 6.2 is therefore refuse to install kit!

* The / MB_Images link now points to / media / hdd / backup or / media / ba / backup

*, The BA is now ONLY WebIF with more current ImageWebIF but it is there to be found in the extras. Direct call with http://ip.deiner.dream.box/barryallen of course continue.

* Label the device of the devices is now ba BA and BA no longer - this will be adjusted automatically when updating to 6.2.

* For those people who are in Layout 3 / mounts media/ba/ba/1..8 gone lost for any reason (chroot, ...), I have now made a purely bainit 900 remounted the only all image partitions

* The boot manager has now if you use WW with FAT for the kernel image (either layout 2 or 3) in addition to enable and disable even a 3rd Condition: wobble

It works like the one when WW with the FAT boot manager used has turned up and STILL the kernel image is used instead of the flash kernel.

If you then boot manager for a new image selects as the last booted (its kernel in the FAT is) then is filled or quickly the FAT with the new kernel and boot logos, BUT reboot the box immediately and the new image the same once booted without a boot manager with his own kernel from the FAT. The next time you boot the boot manager is back on and so forth.

Hence the name wobble

And the guidance of Barry Allen romeo-golf there are 6 here:

Barry Allen instruction

LG
gutemine

[ALFAJAY]

Barryallen 6.2.7-sim2

installation as any ipkg or easily from TSpanel-addons-sim2 addons-sim2 barryallen

[fushkrujs]

Barry Allen 6.2.8

Barry Allen Kit 6.2 Released & Support Thread
Here is the changelog for version 6.2.8 of Barry Allen.

* This is a releaste version in which all known bugs from previous versions should be now fixed, so all previous versions are no longer supported!

* Also support the Wally West now seems to be stable and is Released. Information and to find the kit WW WW in your thread:

Wally West 6.2 for Barry Allen 6.2

* This version is compatible ONLY with the current original loader # 84 of DMM (on the 7025 so it can be more ONLY with loader 83 and the ipk for cheating 84 Loder also use the append here). An exception is the DM7020HD because now MUST be already Loader # 86 on the Box

* The BA 6.2 is the loop device driver will NOT recharge, because of BA's Kit 6.2 for Images> = 3.2.2 release of the images meant where the loop device driver has already been fixed in the kernel. If you have NO current image with loop device driver in the kernel in the flash of BA 6.2 is therefore refuse to install kit!

* The / MB_Images link now points to / media / hdd / backup or / media / ba / backup

*, The BA is now ONLY WebIF with more current ImageWebIF but it is there to be found in the extras. Direct call with http://ip.deiner.dream.box/barryallen of course continue.

* For those people who are in Layout 3 / mounts media/ba/ba/1..8 gone lost for any reason (chroot, ...), I have now made a purely bainit 900 remounted the only all image partitions

* The boot manager has now if you use WW with FAT for the kernel image (either layout 2 or 3) in addition to enable and disable even a 3rd Condition: wobble

It works like the one when WW with the FAT boot manager used has turned up and STILL the kernel image is used instead of the flash kernel.

If you then boot manager for a new image selects as the last booted (its kernel in the FAT is) then is filled or quickly the FAT with the new kernel and boot logos, BUT reboot the box immediately and the new image the same once booted without a boot manager with his own kernel from the FAT. The next time you boot the boot manager is back on and so forth.

Hence the name wobble

And the guidance of Barry Allen romeo-golf there are 6 here:

Barry Allen instruction

LG
gutemine

Thanks gutemine

[powercisco]

Barry Allen 6.3.0

Hier ist das Changelog für die Version 6.3.0 von Barry Allen.

* Das ist eine releaste Version in der alle bekannten Bugs aus den früheren Versionen gefixed sein sollten, womit alle früheren Versionen nicht mehr supported sind!

* Auch der Wally West Support scheint jetzt stabil zu sein und ist damit Released. Infos dazu und den WW kit findet Ihr im WW Thread:

* Diese Version läuft NUR mit dem aktuellen Original Loader #84 von DMM (bei der 7025 kann man es daher NUR mehr mit Loader 83 und dem Schummel ipk für Loder 84 benutzen das auch hier anhängt). Ausnahme ist die dm7020HD, da MUSS jetzt bereits Loader #86 auf der Box sein

* BA 6.3 unterstützt KEINE Images mehr die den Loop device Treiber nicht im Kernel haben und ohne so ein Image im Flash hat wird der BA 6.3 kit sogar die installation verweigern.

* der /MB_Images link deutet ab jetzt auf /media/hdd/backup oder /media/ba/backup

* das BA WebIF geht jetzt NUR mehr mit aktuellem ImageWebIF, dafür ist es aber dort bei den Extras zu finden. Direkter Aufruf mit geht natürlich weiterhin.

* für die Leute denen im Layout 3 die /media/ba/ba/1..8 mounts verloren gegangen sind aus irgendwelchen Gründen (chroot,...) habe ich jetzt noch ein bainit 900 reingemacht das nur alle Imagepartitionen remountet

* der Bootmanager hat jetzt wenn man WW mit FAT für den Imagekernel verwendet (egal ob Layout 2 oder 3) neben enable und disable noch einen 3. Zustand: wobble

Das funktioniert so das man wenn man WW mit FAT verwendet den bootmanager aufgedreht hat und TROTZDEM der Imagekernel verwendet wird statt dem Flashkernel.

Falls man dann im Bootmanager ein anderes Image auswählt als das zuletzt gebootete (dessen Kernel im FAT liegt) dann wird noch schnell das FAT mit dem neuen Kernel und Bootlogos befüllt, ABER die Box sofort rebootet und das neue Image gleich einmal ohne Bootmanager gebootet mit seinem eigenen Kernel aus dem FAT. Beim nächsten Boot ist der Bootmanger aber wieder an und so fort.

Daher der Name wobble

Und die Anleitung von romeo-golf für Barry Allen 6 gibt es hier:

LG
gutemine

[fushkrujs]

Barry Allen 6.3.3

Barry Allen Kit 6.3 Released & Support Thread
Here is the changelog for version 6.3.3 of Barry Allen.

* This is a releaste version in which all known bugs from previous versions should be now fixed, so all previous versions are no longer supported!

* Also support the Wally West now seems to be stable and is Released. Information and to find the kit WW WW in your thread:

Wally West 6.3 for Barry Allen 6.3

* This version is compatible ONLY with the current original loader # 84 of DMM (on the 7025 so it can be more ONLY with loader 83 and the ipk for cheating 84 Loder also use the append here). An exception is the DM7020HD because now MUST be already Loader # 86 on the Box

* 6.3 is not supported BA NO more images to the loop device driver in the kernel and does not have such an image in the flash of the BA kit will refuse even the 3.6 installation.

* Boot Manager now has an option with a bar indicating how much longer time has an image to select boot. The display of the bar but you can boot into the BA options in the plugin turn again.

* There you can now boot from mvi logos and images (bmp and jpg format but only in 600x576 with 24 bit colors are now supported) as background to change the boot manager.

* The / MB_Images link now points to / media / hdd / backup or / media / ba / backup

*, The BA is now ONLY WebIF with more current ImageWebIF, but it is there to find in the extras. Direct call with http://ip.deiner.dream.box/barryallen of course continue.

* For those people who are in Layout 3 / mounts media/ba/ba/1..8 gone lost for any reason (chroot, ...), I have now made a purely bainit 900 remounted the only all image partitions

* The boot manager has now if you use WW with FAT for the kernel image (either layout 2 or 3) in addition to enable and disable even a 3rd Condition: wobble

It works like the one when WW with the FAT boot manager used has turned up and STILL the kernel image is used instead of the flash kernel.

If you then boot manager for a new image selects as the last booted (its kernel in the FAT is) then is filled or quickly the FAT with the new kernel and boot logos, BUT reboot the box immediately and the new image the same once booted without a boot manager with his own kernel from the FAT. The next time you boot the boot manager is back on and so forth.

Hence the name wobble

And the guidance of Barry Allen romeo-golf there are 6 here:

Barry Allen instruction

LG
gutemine

[fushkrujs]

Barry Allen 6.4.1

Barry Allen Kit 4.6 Released & Support Thread
Here is the changelog for version 6.4.1 of Barry Allen.

* This is a releaste version in which all known bugs from previous versions should be now fixed, so all previous versions are no longer supported!

* While this is a minor release, but where the BA plugin has been completely revised, in particular, all the settings and the boot logo selection are now all together in one screen.

* The confirmation prompt before running the shell script commands in the plugin is now only optional, it may be desirable if in the settings but turned back.

* The date for Himzufügen Image name is now also adjustable.

* The * MB_. Tar files are now called simply *. Bar

However, it has only changed its name, are still simple tar files, simple enough to Umbenenenen therefore migrate to the new format.

* Also support the Wally West is released. Information and to find the kit WW WW in your thread:

* This version is compatible ONLY with the current original loader # 84 of DMM (on the 7025 so it can be more ONLY with loader 83 and the ipk for cheating 84 Loder also use the append here). An exception is the DM7020HD because now MUST be already Loader # 86 on the Box

* BA 6.4 supports no more images NOT the loop device driver in the kernel and does not have such an image in the flash of the BA kit will refuse even the 6.4 installation.

* Boot Manager now has an option with a bar indicating how much longer time has an image to select boot. The display of the bar but you can boot into the BA options in the plugin turn again.

* There you can now boot from mvi logos and images (bmp and jpg format but only in 600x576 with 24 bit colors are now supported) as background to change the boot manager.

* The boot manager can now also return the Dreambox to force the flash mode by / delete boot - simply press TEXT button on the remote.

* The / MB_Images link is NOT used anymore, but it is easy / used media / hdd / backup and ONLY if it is not this used to / media / ba / backup.

*, The BA is now ONLY WebIF with more current ImageWebIF, but it is there to find in the extras. Direct call with http://ip.deiner.dream.box/barryallen of course continue.

* For those people who are in Layout 3 / mounts media/ba/ba/1..8 gone lost for any reason (chroot, ...), I have now made a purely bainit 900 remounted the only all image partitions

* The boot manager has now if you use WW with FAT for the kernel image (either layout 2 or 3) in addition to enable and disable even a 3rd Condition: wobble

It works like the one when WW with the FAT boot manager used has turned up and STILL the kernel image is used instead of the flash kernel.

If you then boot manager for a new image selects as the last booted (its kernel in the FAT is) then is filled or quickly the FAT with the new kernel and boot logos, BUT reboot the box immediately and the new image the same once booted without a boot manager with his own kernel from the FAT. The next time you boot the boot manager is back on and so forth.

Hence the name wobble

And the guidance of Barry Allen romeo-golf there are 6 here:

Barry Allen instruction

LG
gutemine