Barryallen 4.8.14 mipsel.ipk
By Gutemine
Barryallen 4.8.14 mipsel.ipk
By Gutemine
Barry Allen 4.8 .15
By Gutemine 13.06.2009
Barry Allen 4.8.16 for Dreambox 7025, 800, 8000
Barry Allen 4.8.17 for Dreambox 7025, 800, 8000
Code:Barry Allen for Dreambox 7025, 800, 8000 2) Installation First boot from Flash and then copy the file enigma2-plugin-extensions-barryallen*.ipk to /tmp with ftp (TCP/IP must be working already). If you have an image in Flash that offers a Blue Pannel Manual Addon Install, then you can use this functionality to install the ipk file. If not, then install Barry Allen by entering the following commands in a Telnet session: cd / ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk Then restart enigma2 and the Barry Allen Plugin shoudl show up under Games / Plugins. In the Images installed by Barry Allen you don't have to install the Barry Allen Plugin anymore. The Barry Allen Plugin integrates himself into then automatically during the image extract. And you can remove Barry Allen if you are booted from Flash: ipkg remove enigma2-plugin-extensions-barryallen 3) Usage There is now the enigma2 Plugin of Barry Allen included under Games / Plugins of the enigma2 menu, which offers the full functionality of Barry Allen. For extracting of nfi images in Barry Allen copy the image files to /MB_Images (normally a link to /media/hdd/MB_Images created during Barry Allen installation) If there are Problems with image extraction or other tasks with the enigma2 plugin try doing it in telnet: cd /media/ba ba.sh extract nameoftheimage On the next reboot this new Image should be available in the bootmanager for choosing to boot it and then it can be customized and used as usual. The Bootmanager now should remember the last booted image and hence recordings from Deepstandby should work now. ==================================================== Have Fun using Barry Allen on the Dreambox !!!! ====================================================
Barry Allen 4.8.18 for Dreambox 7025, 800, 8000
Code:Ich denke das mit den Link wurde schon kreuz & quer diskutiert ... sind dann die Fälle wie keine interne HDD, nur ext USB HDD oder NAS etc. ... Wie auch immer stelle ich hier jetzt eine BA 4.8.18 rein, wo der - Filesystemcheck CF / USB / HDD wieder geht dabei sind am Ende auch die Netzwerkmounts wieder Einsatzbereit, also man muss nicht mehr unbedingt Neustarten Natürlich geht der Filesystemcheck nur vom Flashimage aus. Falls das überhaupt noch gebraucht wird : - das Formatieren des CF & USB (BA) devices und zuletzt das "bainit 110 / 120" : dumpen tut es wieder ... Getestet habe ich auf 8c und 8k mit OoZooN & Gemini2 4.30.
Barry Allen 4.8.20 for Dreambox 7025, 800, 8000
Code:In the 4.8.20 is in / media / ba / bin now also tune2fs is binary (so that you can convert ext2 to ext3 and vice versa, filesystemcheck off, and even the file a label type) BA and the other commands in Webif should now even a little better against the danger Kinesiche secured Thx gutemine
Barry Allen 4.8.21 for Dreambox 7025, 800, 8000
Barry Allen 4.8.22 for Dreambox 7025, 800, 8000
Barry Allen 4.8.22 for Dreambox 7020 and 600
Barry Allen 4.8.23
Code:Barry Allen for Dreambox 7025, 800, 8000 2) Installation First boot from Flash and then copy the file enigma2-plugin-extensions-barryallen*.ipk to /tmp with ftp (TCP/IP must be working already). If you have an image in Flash that offers a Blue Pannel Manual Addon Install, then you can use this functionality to install the ipk file. If not, then install Barry Allen by entering the following commands in a Telnet session: cd / ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk Then restart enigma2 and the Barry Allen Plugin shoudl show up under Games / Plugins. In the Images installed by Barry Allen you don't have to install the Barry Allen Plugin anymore. The Barry Allen Plugin integrates himself into then automatically during the image extract. And you can remove Barry Allen if you are booted from Flash: ipkg remove enigma2-plugin-extensions-barryallen 3) Usage There is now the enigma2 Plugin of Barry Allen included under Games / Plugins of the enigma2 menu, which offers the full functionality of Barry Allen. For extracting of nfi images in Barry Allen copy the image files to /MB_Images (normally a link to /media/hdd/MB_Images created during Barry Allen installation) If there are Problems with image extraction or other tasks with the enigma2 plugin try doing it in telnet: cd /media/ba ba.sh extract nameoftheimage On the next reboot this new Image should be available in the bootmanager for choosing to boot it and then it can be customized and used as usual. The Bootmanager now should remember the last booted image and hence recordings from Deepstandby should work now.