Dm7025 +smargo reader with g@mm@ card problem...

[pantnick]

After alot of effort and many hours i managed to convince my dm that i have a smargo usb smartreader. The problem is that even if it displays a message that the server is smartcard and the ecm time is xxx the picture stays black.
I ve tried many different cfg lines many drivers install/unistall, i did the whole process in 3 different images but still no luck... I checked the kernel info from Gemini`s menu and i get these lines

usb1-1 ccam2.1.1 timed out on ep0out len=0/0
drivers/usb/serial/ftdi_sio.c:ftdi_set_termios failed to s...
drivers/usb/serial/ftdi_sio.c: urb failed to clear flow control
drivers/usb/serial/ftdi_sio.c:ftdi_open Error from DTR HIGH
drivers/usb/serial/ftdi_sio.c:ftdi_open Error from RTS HIGH

I ve attached a log (open with notepad) if anyone knows something more..

[Owenski]

It looks like your drivers are messed up but these files will help you below. You will also need (DCC) Dreambox control center By berny R installed on your computer. I put together a How I did it file to help others. You will also need to use DCC 290 or above to install smartreader_103 7025 drivers on your dreambox.

Also when your following my how I did it readme just use 7025 drivers instead of 7020 listed as both 7020 and 7025 drivers are in the smartreader_103 zip

[Terminator1]

Hi m8

A gamma wont work in a Smargo reader so they all say. I have tried a Gamma in a smargo reader on a server and it wont open the card.

Regards