Latest CerebroCard Files

[jet2web]

this files are ONLY for the CEREBRO CARD !!!

Cerebro_aladin_0383C.hex <- S01 Emulation Irdeto ACS 3.83
Cerebro_aladin_0383CZ.hex <- S02 Emulation Irdeto ACS 3.83
Cerebro_aladin_0383D.hex <- K01 Emulation Irdeto ACS 3.83
Cerebro_aladin_0383DZ.hex <- K02 Emulation Irdeto ACS 3.83
Cerebro_aladin_0384C.hex <- S01 Emulation Irdeto ACS 3.84
Cerebro_aladin_0384CZ.hex <- S02 Emulation Irdeto ACS 3.84
Cerebro_aladin_0384D.hex <- K01 Emulation Irdeto ACS 3.84
Cerebro_aladin_0384DZ.hex <- K02 Emulation Irdeto ACS 3.84

C and CZ for Sat
D and DZ for Cable

[weckmy]

Hello !

sorry , for my maybe silly question :
I use a humax 5400 receiver, wich has Irdeto "on Board"

it seems , that the aladin files from the cerebro card using
the old Irdeto encryption.........

so, do I need a cam , like a joker cam or Magic cam in my Humax ???

or just put the card into the receiver ?

( can not test it , because my card reader is out of order)

[jet2web]

You can use cerebro with your Humax 5400

you need only an patch "ToH patch" !

Humax 5400 ToH Patch is working
Humax 5900 BTCI is working
Humax PR 9800 not working
Humax PR FOX not working

[mjbrunner]

this files are ONLY for the CEREBRO CARD !!!

Cerebro_aladin_0383C.hex <- S01 Emulation Irdeto ACS 3.83
Cerebro_aladin_0383CZ.hex <- S02 Emulation Irdeto ACS 3.83
Cerebro_aladin_0383D.hex <- K01 Emulation Irdeto ACS 3.83
Cerebro_aladin_0383DZ.hex <- K02 Emulation Irdeto ACS 3.83
Cerebro_aladin_0384C.hex <- S01 Emulation Irdeto ACS 3.84
Cerebro_aladin_0384CZ.hex <- S02 Emulation Irdeto ACS 3.84
Cerebro_aladin_0384D.hex <- K01 Emulation Irdeto ACS 3.84
Cerebro_aladin_0384DZ.hex <- K02 Emulation Irdeto ACS 3.84

C and CZ for Sat
D and DZ for Cable

@jet2web

Thank you very much!!!

[skem153]

hi mad max m8 will this file do both d+ and premiere regds skem153 LFC

[joedoe]

re no freeze i have a technomate 1500 with a dragon cam what files should i use plz

[jet2web]

you need the "Cerebro_aladin_0384CZ.hex"

[Payne]

Hi, i tried to use the Programmer via USB->RS232 Adapter. But I think it don´t works :(
Is it possible to programm the Cerebro Card via USB->RS232? I choosed the correct Com Port.

Greetz from Austria

[jet2web]

du brauchst einen programmer der den phönix modus unterstützt (z.B. Infinity USB Unlimited) - oder jeden normalen programmer mit rs232 schnittstelle und mit 3,57MHz (mode 1 mouse 3.57MHz)

wenn dein zebra neu ist, hoffe ich das du OS drauf hast (siehst du am ATR String - sonst läuft nichts)

[mjbrunner]

that's not correct !!!

you can use cas3.


-you have to connect cas3 with the serial-cable.

-start cis-studio 6.6b

-go to utilities

-phoenix mode 3.58
------------------------------
-start cere*ro-loader

-select comport

-load file

-programm card

-have fun



groucho

Maybe, it's a silly question:

Where do I have the smartcard (ce*card) put in?
With the CAS3?
In the slot above (just the card alone) oder in the slot below (with a CI-Module)?

Does the Alphacrypt light module also function? Or just the Alphacrypt?

Thank you