hello, is it possible to receive hotbird 13e eutelsat w2 16e and astra 19e with a dish with multi lnb (gt sat)?
Thank you
hello, is it possible to receive hotbird 13e eutelsat w2 16e and astra 19e with a dish with multi lnb (gt sat)?
Thank you
Yes it is possible.
It best to use 1m dish you also need a treble lnb holder for 19E, 16E, 13E
If you explain to the dealer what you want he will help you.
With 1 M dish you could have more satellites if you wish.
The other option it is to have a motorised dish, it will get all you want for now and in the future.
seadiver
hi seadiver.
i have a 1m dish with focus on 13e and receiving 19e and 28.2e i recive all three satellite with good signal, i have been trying to ad orther lnbs to recieve 9e,5eand 1w.
But with the lnb placed at 9e when sanning i am receiving signals from astra 23.5 and with lnb placed at 5e i receiving 28.2 does this mean that my lnb is either too low or a little high.
your veiws welcome.
thank you.
[QUOTE=shakyA23;657201]hi seadiver.
i have a 1m dish with focus on 13e and receiving 19e and 28.2e i recive all three satellite with good signal, i have been trying to ad orther lnbs to recieve 9e,5eand 1w.
But with the lnb placed at 9e when sanning i am receiving signals from astra 23.5 and with lnb placed at 5e i receiving 28.2 does this mean that my lnb is either too low or a little high.
your veiws welcome.
hi,
If your using a toroidal t90 you have to align the lnb on position 0 on the black lnb suport, direction of the lnb is the center of its support, if you see what I mean.
Also control your connection to the diseqc switch and compare with the config in your receiver!
The best conbination and cheaper also for 13e 16e 19e is a triax 88cm with a triax multi lnb support (4 lnb support are included in the kit), use inverto black ultra lnb for the best performance.
yes you can...you will need an arm to hold more than 1 lnb. but you will also need a diseqc switch