(Azbox HD Emu) MultiCAS

[iacovides]

Can you connect to a CCcam server with multicas?

[nickman9271]

yes my friend , multicas can connect up to 16 cccam servers simultaneously .
u can use multicasedit v1.5 to edit your config .
it can also connect to newcamd servers .

[aguda]

New Unofficial Multicas 1.62E-D0x

Whats New?
-Austria-Sat KeyFix ,ok!

[philippe146]

MultiCAS-v162E-D01B


MultiCAS-v162E-D01B

Code:
Azbox Cabo 11/03/2010

http://www.4shared.com/file/1EYi8UsN...162E-D01B.html

[aguda]

MultiCAS
-DATE : 2011/03/23
-Version : v1.62E-D01C
-----------------------------------------------
MOD : More improvement about Found Best Server for CCcam
ADD : Added mode 'CCCAM_NEWCAMD_WORK_TOGETHER = 2' it's using for Local Server Client + CCcam + Newcamd

[ylvi]

MultiCAS
-DATE : 2011/04/20
-Version : v1.63
-----------------------------------------------
MOD : More improvement about NDZ card (Part of EMM and initialize)
ADD : Added BISS key (See include new_biss.key and below)
- Turner, Globecast feed (Cartoon Network Arabic) @ 13E
- Opap Tv (13.0°E)
- Monitor Games (13.0°E)
- CNN Turk (42.0°E) TURKSAT 2A (42.0°E)

[ALFAJAY]

MultiCAS
-DATE : 2011/04/28
-Version : v1.63A
-----------------------------------------------
ADD : Added option about EMM Blocker for Cryptoworks card
: See 'example-cardkeydata.txt' possible to control by cws_emm_blocker = 0 or 1
ADD : Added BISS key (See include new_biss.key and below)
- NBA TV (EutelsatW2A @ 10°E)
MOD : More improvement about Irdeto Card

[philippe146]

Multicas v-1.70

Quote:
MultiCAS
-DATE : 2011/05/18
-Version : v1.70
-----------------------------------------------
ADD : Added BISS key (See include new_biss.key and below)
- Al Jazeera Channel (Eutelsat W4/7 @ 36°E)


ADD : Added Re-Sharing (CCcam via Local Share, see as below)

--- How to use Re-Sharing of CCcam share ---

Use one CCcam account for more Azboxes with MultiCAS

1. Azbox connected to CCcam server

a. Get CCcam account.
b. Go to Plug-Ins->OpenXCAS->MultiCAS and smart Card Splitter & CS Menu
c. Select Mode as Server and set the sub-menu as follows ;
- My IP Address : this is the IP adres of your Azbox. This will be the server IP address in the client.
- Port : 3000 (default value) - Please set the value between 1000 and 9000.
- Time Out : 2.0 sec (default value). If you use more clients this time-out value must be higher. Please keep it below 4.0 seconds.

- Save the changed values by pressing RED button on RCU.

2. Client Azbox


a. Go to Plug-Ins->OpenXCAS->MultiCAS and Smart Card Splitter & CS Menu
b. and select Mode as Client and set the sub-menu as follows ;
- Server Domain Name Use : OFF (or ON if you use DNS.)
- Server IP Address : Set the IP address of the Server STB.
- Server Domain Name : If the Server Domain Name Use is ON, put the domain name.
(if you use local share between Azboxes in your house the Server IP Address will be like 192.168.xxx.xxx)
- Port : 3000 (default value) - Please set the same value with that of Server STB.
- Time Out : 1.0 sec (default value will 1.0 sec, but 3.0sec will be better)
- Check Server : Press OK button for checking the Server STB. If the server information is correct, you will see Server CAS ID : 0x0000.


- Save the changed values by pressing RED button on RCU.
- Go to TV and check the channel is working well.
- If you would have more sets to use Client please follow the above procedure again.
- If the TV channel on Client STB is not working please try to adjust the value of Time Out.

http://www.4shared.com/file/9KrO3flv/MultiCAS-v170.html 

[ALFAJAY]

Multicas v-1.70b

MultiCAS
-DATE : 2011/06/10
-Version : v1.70B
-----------------------------------------------
MOD : More improvement about Hops control for NDZ (CCcam)
ADD : Add support Timeout limit control for CCcam, this for Found Best Server or Found Best ShareID (see example-timelimitcaid.cfg)
ADD : Show Entitlement for NDZ card (can found at /tmp/card_slot.info)

[ALFAJAY]

Multicas v-1.70d

-Version : v1.70D
-----------------------------------------------
FIX : Fixed about Nagra for CCcam
FIX : Fixed about DRE for Newcamd (between Platform*HD and Triocol*TV)
MOD : Improvement about read and write proccess for CCcam