Cerebro Premiere Back

[sep]

I Have when i loud the file with a Duolabs 3 the message "NO ATR check Card"
What can I Do?

greetings Sep.

[Ichijoe]

If you have a DragonCAM or simular that can read what your Card is (i.e. Irdeto/Beta typ 1702: Like it should be!) I would like to know if your Card is reported as a Dreamcrypt version. As that's what happend to me lastnight. Beeing in a clamer and clear mood thanks to 007.4 reminding me that the Files themselves were in RSA I thought perhaps that some Arsehole might have renamed the Dream_embeded File. But, lol this fails 'cause:

1) The Dreambox_embeded still retains an ATR.
2) The card would not be recognized not as a Dreamcrypt, but rather as a Conax. So this has me pretty much quakein' right now as to what it pertains. If someons able to crack the RSA to make fake Cerebro Files.

@sep I'm sorry (but, hardly surprised), to hear about your misfortune with this incident. I dnon't know what els to tell you but to try and reflash the last proper Image Files to your Cerebro again. (if you even can),. If you can use CAS Studio 7.4 I'd HIGHLY RECOMEND YOU DO SO! as unlike the Cerebro Loader CAS Studio will let you Erase the Card back to the standard Cerebro ATR.

So Blackbostas that's One strike against you. No make that Two since your Website is non-existant and I'd dare say full of IRC-BOTS! Now I have to run my Adaware again.

Again no matter what there intentions might be I wouldn't trust someone whos Post Count is lower the 50 to come here with credible Cerebro News.
Again if it does NOT look like a prior Cerebro release. I urge you to trash it!
Or else you can likely trash your Card!

[Shadoe]

look guys i try the files are 100% ok
so dont start und come is fake is fake ok
the files are made by Nagra Crew und are 100%
i test my self
stop to say are fake ok
if you dont like to see tv premiere ok your problem
i put im 5 cerebro cards from my friends works perfect

I am using kabel box. i need the 384dz files. the files tat are listed here, DO NOT WORK in my sagem DBOX2 with keyworld image.

greetings
tim

[sep]

Thanks I am trying it again
but witch file I must use Aladin 0383 cz or ?
Gr Sep

[007.4]

try and reflash the last proper Image Files to your Cerebro again. (if you even can),. If you can use CAS Studio 7.4 I'd HIGHLY RECOMEND YOU DO SO! as unlike the Cerebro Loader CAS Studio will let you Erase the Card back to the standard Cerebro ATR.

@sep
If you do not have a CAS interface to use CAS Studio, you can use the "erase_app" script I wrote and posted a little earlier in this thread.

You need a Phoenix interface and WinExplorer.

If you can erase the fake app and get the cerebro ATR back again you should be OK.

@Ichijoe
Did you get no ATR with the fake app or a "Dreamcrypt" ATR?

The former is more likely as any old rubbish in the hex file would cause the card to go into security lock down and give no ATR. After, a while (say an hours rest) the normal ATR should come back (usually after a bit of persuading - by sending many resets and pulling and replacing the card at the same time).

You could try my Didem_ATR_restore.xvb script for this. Original written for Didem card but may well work for others. (attached)

If there was definately a fake ATR from the card, this would be more worrying as this would indicate the RSA keys have been hacked.

007.4

[007.4]

Thanks I am trying it again
but witch file I must use Aladin 0383 cz or ?
Gr Sep

After you get the cerebro ATR back, attempt to write ANY old, but valid, file.
Once you can write to your card again, then you can worry about which is the correct file for your setup.
MFG
007.4

[Ichijoe]

@007.4

I was not able to get a proper ATR to display on my PC though CAS Studio. Perhaps I should have tryed a different App from with-in.
No I got the Dreamcrypt thing by sticking my Card into my T-Rex just to see if I could get it to respond. It was though the 'Smartcard' option there, that my Cerebro dispalyed itself as beeing a 'Dreamcrypt'. So I don't know if the Cerebro Loader in CAS Studio can even display other ATRs' then those of the Cerebro.

Needless to say it didn't decode anything. I was however able to restore my Card with an older Image (known to work!), allthough it took several attempts of pulling the Card in and out till it finally took hold.
IIRC the second File I attempted before I came back to my own good sences + what you said about the 'Trap Time' I tryed a different version. which like the former was 16.6Kb (IIRC), it only had the One 384CZ.hex File. That turned out to be just an Irdeto Card to my T-Rex. Again it didn't decode Mud!

After that I was able to fight with my Card again to get it back to where it is with the Non-Premiere working KDH Image, and have since learnd not to trust noobs bearing Cerebro Files! Assuming that there really is One. I kinda doubt it though. I will trust it will get around. But this really is turining into a Needle in the Haystack type deal. It's a damned shame that it has to end like this though...

[sep]

Thanks again, i have loaded cerebro Fix an than 0383cz but no reply
i have now the ATR back and a lot of numbers but no picture....
what do i wrong?
Gr Sep

[weirdphilo]

Works fine - Prem. & KD working again! Tested on cabel dbox2 with 384dz-file. Thanks a lot!
weirdphilo.

[Ichijoe]

Again you almost have to laugh at this Sh*t!
Why is it that only the noob with less then a handfull
of Posts are the only Ones to get Premiere working again?!

Beleave you me it's not though a lack of trying you keep posting 'em
and I'll eventually try 'em all out should I actually land a 'Hit'.
Youl all can beleave I'll pass that info on to yous' lot.

Sadly I have not found this Golden File yet even with all the happily
pointing Noobs crying here here!!