Diablo light - Diablo WI-FI - Diablo 2 - Fausto etj

[igius12]

i kam provuar te gjithe programet deri tani per matrix cam air dhe :
versioni 3.51 nuk me lidhet me oscam
3.39 lidhet dhe do 3 min te ndizet
xmas gjermani me 3.39 lidhet per 90 sec dhe kur nderron kanalet ngec dhe spunon me.

kush eshte versioni me i mire ju lutem qe eshte me stable?????

cas interfase te duhet vetem per te programuar dhe futur keys emu dhe cline ne diablo cam wifi

ndersa per matrix cam air te duhet vetem nje pc programi dhe guida qe po ti vendos me poshte

[benardi]

i kam provuar te gjithe programet deri tani per matrix cam air dhe :
versioni 3.51 nuk me lidhet me oscam
3.39 lidhet dhe do 3 min te ndizet
xmas gjermani me 3.39 lidhet per 90 sec dhe kur nderron kanalet ngec dhe spunon me.

kush eshte versioni me i mire ju lutem qe eshte me stable?????

versioni me i mire eshte ai qe te ben pune ty

problemi eshte se ky modul ka pasur pak suport,krahasuar me diablo cam wifi ka vetem nje te mire qe nuk nxehet shume

[igius12]

kur kaloj kanalet nga njeri te tjetri pas kalimit te 20 kanaleve oscam ngec me te gjithe versionet e firmware per modulin.
mos duhet gje update i oscam apo nuk ka lidhje. nese duhet version tjeter i oscam, une kam shkarkuar disa versione por nuk di si ti bej update....
nese ka njeri qe di si behet ju lutem me ndihmoni.
faleminderit per suportin

[igius12]

Ndonje ndihme do ishte e mirepritur :)

[stv2008]

	
	
Description
Changelog MCA_NG (C) mrweb, dirty harry 123
0.2.2-XMAS-339
- CAM Firmware:
- Supported caïds: 1801 1802 1803 1810 1830 1833 1834 1835 1843 1880 1702 1722 1838
0D03 0D05 0D95 0D96 09C4 09C7 098C 0963 0648 0626 0500 0100 0B01
0.2.1-XMAS-339
- CAM Firmware:
- Supported caïds: 1803 1835 1838 1722 0D05 09C4 1702 1801 1802 0500 0648 0963 098C
09C7 0626 0B01 0D95 0D03 0D96 1830 1833 1834 1843 1880 1810 0627
0.2-XMAS-339
- Boot procedure (initramfs + rootfs) completely revised -> Boot time about 1:30 min
- Flash / SD Update revised -> memory sparing, less flash error
- MCAM Binary Patches:
- Hidden sharing client (TNet) disabled.
- Superfluous features (twitter, gmail, etc.) removed from the menu.
- Delays / Sleeps reduced in many places. -> Faster switching / Faster response
- Oscam-1.20-unstable_svn7963:
- Remove Duplicate CAIDs / ECM PIDs -> Shorter switchover times
- "Locking" functioning CAIDs -> less Freezer
- Web interface on port 90, userassword = oscamscam
- CAM Firmware:
- Supported caïds: 0626 0627 0628 0648 093B 0500 0963 09C4 09C7 0B01 0D00 0D03 0D05
0D95 0D96 1702 1722 1801 1803 1830 1833 1834 1835 1838 1843 1880
- No downgrade longer necessary.
- Mio / SCI1-fix:
- Kernelhook to reduce the CPU load by "SCI1" kernel thread -> Faster response of the module
- Telnet / SSH:
- Telnet on default port (23).
- SSH (dropbear 00:52) on default port (22).
- SSH login without an error message.
- Userassword = root: root
- Busybox:
- New busybox (v1.20.2) with many other tools.

[stv2008]

Mesa lexova nuk eshte shume stabil me kete modul Cardsharing

Manual to update by ftp with Filezilla Server (only for PC)

[stv2008]

Here is the official instructions for upgrading the MCA via SD Card

[stv2008]

Oscam for Matrix Cam Air 1.20 #11006

[stv2008]

Last "Unofficial" update for the Matrix Air Module 3.51
EasyUpdate.

Gbox unter oscam

oscam.server:
[reader]
protocol = gbox
group = 1
device = 192.168..XXX.XXX,3820
password = XXX
user = gbox_client

http://www.streamboard.tv/wiki/OSCam...am.server#gbox

[benardi]

Ndonje ndihme do ishte e mirepritur :)

materjalet qe te ka sjelle lapraksi shpresoj te bejne pune

nese nuk te bejne pune me bej nje mp ne privat qe te afroj nje zgjidhje tjeter

kalofsh mire