powersky tools

[dendi]

loader autoarrioner for powersky 1500 and clones .
in english how to proceed :
1- power off ur receiver
2- with remote control press 74620 then you will see in urreceiver soft and then (end)
3-important you must see END on your receiver otherwise restart from the begin
4- switch off your receiver from back if you don't have it switch it off
5-open your loader auto ariter , choose your file
6- switch on ur receiver
7-you will see on your receiver 8888 and in the loader blue line and it will pass to the red line
8- leave ur receiver till you see 8888 and ur receiver will restart

9- go to ushaia or france 4 wait10 seconds and you ahve tps now open

good luck
any way you could vote for me too if you are satisfied

[mici2]

pack jtag powersky 1900ci

[radium]

DZarion loader the best loader

[las 59]

tout pour powersky 1500 avec tuto tps ok

[radium]

5 outils en 1

Si ce dossier vous as satisfait veuillez cliquer sur la balance située sur la bannière de ce poste approuver et un petit thanks serais gentille



If this file satisfied you want to click on the balance located on the banner of this station to approve and small a thanks would be nice

[radium]

new version for dz_arion_loader_version2_all

Features of this programme (dz_arion_loader_version2_all) -:

1-Sending and withdrawn of soft
2-sending and withdrawn of channelle ird
3-sending and withdrawn of keys irk and auc
4-sending and withdrawn of boot for all hardwer
5-sending for the patsh dvbxtreme ...panel...graphic..gp..
6-Correction automatic for cata size and cheksum and cp
7-send soft Even if not identical for hader
8-search automatic for com
9-Give a lot of information about the file sending or withdrawn
10-and mach mor
11-bye bye download fail


the is the pic for the programme









Si ce dossier vous as satisfait veuillez cliquer sur la balance située sur la bannière de ce poste approuver et un petit thanks serais gentille



If this file satisfied you want to click on the balance located on the banner of this station to approve and small a thanks would be nice

[radium]

2 tuto sbcl french merci a son auteur

[radium]

converter tps BIn in TPS AUC

[radium]

présentation de la procedure de fctionnement de gbox sur arion.

1ère étape: ouvrir un compte sur un site d'ip dynamique tel que no-ip.info (il y en a une infinité), dans notre cas par exp smith.no-ip.info.

2ème étape choisir un mot de passe de 8 caractères (par exp 12345678).

3ème étape: ouvrir un port sur votre routeur en tcp/udp réservé aux connexions gbox (par exp le port 2000) cette procédure n'est pas universelle elle dépend de la marque de votre routeur.

4ème étape: constituer votre fichier de données gbox: cwshare.cfg
les lignes à retenir pour ce fichier sont de deux types (le reste n'est pas essentiel pr le fctionnement de gbox et est initialisé par défaut).

- la ligne M: cette ligne contient vos données de connexion

M: { votre_ip_dynamique { votre_mot_de_passe }}

dans notre cas:

M: { smith.no-ip.info { 12345678 }}

- la ligne D: cette ligne contient les informations du client auquel vous vous connectez:

D: { adresse_ip_dyn_du_client { votre_port son_port { son_mot_de_passe { A6 A6 }}}}

supposons que votre client possède l'adresse dynamique client.no-ip.info, réserve le port 3000 pour gbox, et possède le mot de passe ABCDEFGH alors la ligne D devient:

D: { client.no-ip.info { 2000 3000 { ABCDEFGH { A6 A6 }}}}

5ème étape: télécharger le pack gbox pour dvbxtreme. (ci-joint)

6ème étape décompresser le pack vers un répertoire et y copier le fichier cwshare.cfg ainsi constitué

7ème étape: si votre firm du récepteur ne supporte pas le gbox SSSP, télécharger, charger le firm AF7 de dvbxtreme et activer le protocol gbox SSSP.

8ème étape: ouvrir le firewall pour le programme gboxx86.exe existant dans le répertoire de travail.

9ème étape: lancer gboxx86.exe. bonne vision.

Remarque sur l'échange de dline:

Pour les questions sur la ligne D et comment l'obtenir, pour ça , il vous faut vous débrouiller avec un ami ou moyennant un abonnement mensuel.

cependant il y a plusieurs sites sur lesquels vous pouvez échanger votre dline. la dline à échanger figure comme suit:

D: { votre_adresse_ip_dyn { xxxx votre_port { votre_mot_de_passe { A6 A6 }}}}

l'espace xxxx est réservé à la personne avec laquelle vous faites l'échange (mrx.no-ip.info) et représente son port de communication: dans notre cas:

D: { smith.no-ip.info { xxxx 2000 { 12345678 { A6 A6 }}}}

Important: ne pas confondre cette dline d'échange (la votre) avec celle du client. elle est destinée uniquement à l'échange.

à son tour celui avec qui vous procédez à l'échange vous enverra son dline que vous recopierez dans votre cwshare.cfg après avoir remplacé l'espace xxxx par votre port . supposons que la réponse de mr x est:

D: { mrx.no-ip.info { xxxx 5000 { 98765432 { A6 A6 }}}}

vous remplissez l'espace xxxx par 2000 (votre port de communication) et vous recopiez la dline obtenue, soit

D: { mrx.no-ip.info { 2000 5000 { 98765432 { A6 A6 }}}}

dans votre cwshare.cfg. après cet échange mrx est devenu votre client.

thanks au concepteur , thanks a bootstrap

ps
-le pack est configuré pr le port com1.
-vous devez tjrs garder votre adresse dynamique à jour à travers le site en question ou via un logiciel de màj automatique.
-ne pas remplacer les 3 fichiers ci-joint (gboxx86.exe, cygwin1.dll et gbox_cfg) pr éviter d'éventuelles erreurs de lecture depuis le récepteur.
-A SUIVRE la méthode de forcer le fonctionnement de Mbox sur Arion.

------------------------

DVBxtreme AF7RC7 + gbox client
boot TSR S190CI v20.1


____________________________________
english

presentation of the procedure of fctionnement of gbox on arion.

1st stage:to open an account on a dynamic site of IP such as No-ip.info (there is an infinity of it), in our case by exp smith.no-ip.info.

2nd stage to choose a password of 8 characters (by exp 12345678).

3rd stage:to open a port on your router in tcp/udp reserved with connections gbox (by exp the port 2000) this procedure is not universal it depends on the mark of your router.

4th stage:to constitute your data file gbox:cwshare.cfg
the lines to be retained for this file are of two types (the remainder is not essential Pr fctionnement of gbox and is initialized by defect).

- the line M:¶this line contains your data of connection

M:{votre_ip_dynamic {votre_mot_de_passe}}

in our case:

M:{smith.no-ip.info {12345678}}

- the line D:this line contains information of the customer to which you connect yourselves:

D:{adresse_ip_dyn_du_client {votre_port son_port {son_mot_de_passe {A6 A6}}}}

let us suppose that your customer has the dynamic address client.no-ip.info, reserve port 3000 for gbox, and has the password ABCDEFGH then the line D becomes:

D:{client.no-ip.info {2000 3000 {ABCDEFGH {A6 A6}}}}

5th stage:to download the pack gbox for dvbxtreme. (herewith)

6th stage décompresser the pack towards a repertory and to copy there the file cwshare.cfg thus made up

7th stage:if your firm of the receiver does not support gbox SSSP, to download, charge firm AF7 of dvbxtreme and to activate the protocol gbox SSSP.

8th stage:to open the firewall for the existing program gboxx86.exe in the repertory of work.

9th stage:to launch gboxx86.exe. good vision.

Notice on the exchange of dline:

For the questions about the line D and how to obtain it, for that, it is necessary for you to manage with a friend or with the help of a monthly subscription.

however there are several sites on which you can exchange your dline.the dline to exchange figure as follows:

D:{votre_adresse_ip_dyn {xxxx votre_port {votre_mot_de_passe {A6 A6}}}}

space xxxx is reserved to the person with which you make the exchange (mrx.no-ip.info) and represents her wearing of communication:in our case:

D:{smith.no-ip.info {xxxx 2000 {12345678 {A6 A6}}}}

Significant:not to confuse this dline of exchange (your) with that of the customer it is intended only for the exchange.

in its turn that with which you carry out the exchange will send you its dline that you will recopy in your cwshare.cfg after having replaced space xxxx by your port.let us suppose that the answer of Mr. X is:

D:{mrx.no-ip.info {xxxx 5000 {98765432 {A6 A6}}}}

you fill space xxxx per 2000 (your wearing of communication) and you recopy the dline obtained, that is to say

D:{mrx.no-ip.info {2000 5000 {98765432 {A6 A6}}}}

in your cwshare.cfg. after this mrx exchange became your customer.

thanks with the originator

PS
- the pack is configured Pr the port com1.
- you must tjrs keep your up to date dynamic address through the site in question or via an automatic software of màj.
- not to replace the 3 files attached (gboxx86.exe, cygwin1.dll and gbox_cfg) Pr to avoid possible misreadings since the receiver.
- TO FOLLOW the method to force the operation of Mbox on Arion.



DVBxtreme AF7RC7 + gbox customer
boot TSR S190CI v20.1


M:{smith.no-ip.info {12345678}}

- the line D:this line contains information of the customer to which you connect yourselves:

D:{adresse_ip_dyn_du_client {votre_port son_port {son_mot_de_passe {A6 A6}}}}

let us suppose that your customer has the dynamic address client.no-ip.info, reserve port 3000 for gbox, and has the password ABCDEFGH then the line D becomes:

D:{client.no-ip.info {2000 3000 {ABCDEFGH {A6 A6}}}}

5th stage:to download the pack gbox for dvbxtreme. (herewith)

6th stage décompresser the pack towards a repertory and to copy there the file cwshare.cfg thus made up

7th stage:if your firm of the receiver does not support gbox SSSP, to download, charge firm AF7 of dvbxtreme and to activate the protocol gbox SSSP.

8th stage:to open the firewall for the existing program gboxx86.exe in the repertory of work.

9th stage:to launch gboxx86.exe. good vision.

Notice on the exchange of dline:

For the questions about the line D and how to obtain it, for that, it is necessary for you to manage with a friend or with the help of a monthly subscription.

however there are several sites on which you can exchange your dline.the dline to exchange figure as follows:

D:{votre_adresse_ip_dyn {xxxx votre_port {votre_mot_de_passe {A6 A6}}}}

space xxxx is reserved to the person with which you make the exchange (mrx.no-ip.info) and represents her wearing of communication:in our case:

D:{smith.no-ip.info {xxxx 2000 {12345678 {A6 A6}}}}

Significant:not to confuse this dline of exchange (your) with that of the customer it is intended only for the exchange.

in its turn that with which you carry out the exchange will send you its dline that you will recopy in your cwshare.cfg after having replaced space xxxx by your port.let us suppose that the answer of Mr. X is:

D:{mrx.no-ip.info {xxxx 5000 {98765432 {A6 A6}}}}

you fill space xxxx per 2000 (your wearing of communication) and you recopy the dline obtained, that is to say

D:{mrx.no-ip.info {2000 5000 {98765432 {A6 A6}}}}

in your cwshare.cfg. after this mrx exchange became your customer.



PS
- the pack is configured Pr the port com1.
- you must tjrs keep your up to date dynamic address through the site in question or via an automatic software of màj.
- not to replace the 3 files attached (gboxx86.exe, cygwin1.dll and gbox_cfg) Pr to avoid possible misreadings since the receiver.
- TO FOLLOW the method to force the operation of Mbox on Arion.



DVBxtreme AF7RC7 + gbox customer
boot TSR S190CI v20.1

thanks a bootstrap

[raed_vb]

where is the loader