mg_cfg στο /usr/keys/
Code:
M: { 01 }
C: { 01 }
A: { 01 }
U: { 01 } 0x12c0
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 00 }
O: { 020} username password
S: { 03 } 80
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }
F: { 01 }
newcamd.list στο /usr/keys/
Code:
#
CWS = localhost 15000 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
#
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_KEEPALIVE = yes
#
newcs.xml στο /etc/tuxbox/config/
Code:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>none</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>no</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>wbnewcs</name>
<password>wbnewcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>debugpw</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>user1</name>
<password>pass1</password>
<au>on</au>
<sidoverride>on</sidoverride>
<spider>No</spider>
</user>
</newcamdserver>
</newCSconfig>
Απλά πράγματα. MgCamd 1.35a + NewCS1.67 σε DM500HD Enigma2 image.
Originally Posted by Roulitsas
Posting Permissions
