Συζητήσεις BD cart

[siafari]

Kαι οταν λεω εχω δοκιμασει ενοοω ειμαι σε 5 διαφορετικους ταυτοχρονα εγω σε 1 ο ξαδερφος στον 2 ο ανιψιος στον 3 και παει λεγοντας ecm time 0.175 εως 0.500 και οι 5!Απλα ο 5ος Δινει και τα HD spesial διχως κανενα κολημμα

opios pidai polla paloukia na prosexi na min tou kathisi kanena pouthena
ego se enan eime ke pezoun astamatita apo perisi ta HD xoris kolimata ktlp oso gia tous xronous file ke 1,5 na pai spasimata den kani opote i 0.1 i 1.5 to idio prama eine
as ta metaferi kapios pedia giati ,edo eimaste stin BLD alla milame gia garsonia ,pali ksefigane merikoi xexexe

[akis70]

βρηκα αυτο: BDC_ATR_Restorer , αλλα δεν εχω πλεον καρτα για δοκιμη

BDC_ATR_Restorer changes to my BDC_ATR_Restorer WinExplorer script.
This will NOT resurrect a card that has been killed with a killer BDC file.
However, it wants to restore the ATR to a BDC Which is stuck in application mode and the Dragon Loader can not erase or detect it.
You must use a Phoenix interface, initially at 6:00 MHz, ideally in a 'real' rs232 comport. Then, when prompted, change to 3:57 Mhz and run the script again. It works fine for me with a CAS3 interface.
Please give feedback on any success or not.

[/ Original_]

This script is used to a no longer existing ATR restore a blue dragon card.
This script does not help if the card has been described with a so-called killer BDC file.

instructions:
- Card in a Phoenix Programmer, ideally with a real RS232 Com port, not usb
- Set to 6 MHz
- Script can be run
- When asked to move to 3.57 MHz
- And let the script run through again
Should work with a CAS3 wundertbar.

[manous]

βρηκα αυτο: BDC_ATR_Restorer , αλλα δεν εχω πλεον καρτα για δοκιμη

This will NOT resurrect a card that has been killed with a killer BDC file.

Οποτε δεν την επαναφερει αν εχει φαει την φολα!

[kurt4000]

βρηκα αυτο: BDC_ATR_Restorer , αλλα δεν εχω πλεον καρτα για δοκιμη

BDC_ATR_Restorer changes to my BDC_ATR_Restorer WinExplorer script.
This will NOT resurrect a card that has been killed with a killer BDC file.
However, it wants to restore the ATR to a BDC Which is stuck in application mode and the Dragon Loader can not erase or detect it.
You must use a Phoenix interface, initially at 6:00 MHz, ideally in a 'real' rs232 comport. Then, when prompted, change to 3:57 Mhz and run the script again. It works fine for me with a CAS3 interface.
Please give feedback on any success or not.

[/ Original_]

This script is used to a no longer existing ATR restore a blue dragon card.
This script does not help if the card has been described with a so-called killer BDC file.

instructions:
- Card in a Phoenix Programmer, ideally with a real RS232 Com port, not usb
- Set to 6 MHz
- Script can be run
- When asked to move to 3.57 MHz
- And let the script run through again
Should work with a CAS3 wundertbar.

Το συγκεκριμενο script φιλαρακι υπαρχει στο satuniverse εδω και 1 χρονο και φυσικα δεν κανει τιποτα εντελως φιλικα

[csbulservice]

kalispera.... Yparxei dynatotita na antigrafei karta tis nova Kappa eite pantremeni eite mi pantremeni, wste na vgoun polles BD kartes kai na paizoun ok?

[siafari]

ola mporoun na ´ginoun!!!

[nikolas021292]

ola mporoun na ´ginoun!!!

afou o novas leei den ginetai esi ti epimeneis? kati tha kserei perisotero, aloste to leei kai to onama tou novas

[manous]

pare ena dreambox na kanis thn douliasou.

....και μετα θα σε δεσουμε!!

[HOBSAT]

....και μετα θα σε δεσουμε!!

θα σε δεσουμε ή θα σε δέσουνε.!!!

[xaris36]

kalispera.... Yparxei dynatotita na antigrafei karta tis nova Kappa eite pantremeni eite mi pantremeni, wste na vgoun polles BD kartes kai na paizoun ok?

den mporo na katalavo pos den skeftonte to ti grafoun exei olokliro thema edo pera kai den mpenoun kan ston kopo na diavasoun kai ligo eleos!!! kai apefthias sto psaxno