new cerebro file for premiere.15-06-06

[cascade]

here you go working 100%.enjoy.

[cb3hn]

here you go working 100%.enjoy.

!!! This Files are faked or expired !!!

Testet with: Duolabs CAS3 Interface + Cerebro card on Humax 5400Z (ToH 3.4 Hot 7.5).

Regards to all...

[passete]

here you go working 100%.enjoy.

Very big thanks to you cb3hn ,

Files tested and working 100% !

[Nordmann]

Tested 384dz with Premiere Cable...

Does not work!!


Files are identically to the fake 2032_Cerebro_Update_15062006.zip wich you can find on all ULC since this early morning.


Greetz,
Nord

[passete]

Tested 384dz with Premiere Cable...

Does not work!!


Files are identically to the fake 2032_Cerebro_Update_15062006.zip wich you can find on all ULC since this early morning.


Greetz,
Nord

Sorry mate, is maybe not working for you !
Don't tell is FAKE, because it's working fine for me !
I will post a photo from premiere right now !
maybe this way, you can see with your own EYES well open.
Cheers !

[Nordmann]

np mate, i just read that the files from this early morning where fakes and compared it to the uploaded files!!

I now read that the files only work for cerebro cards with Bios version higher than 1.01 :'(

So propably thats my problem :(


Could you check wich Bios Version your card has?
I also tried with 384cz, no luck :(

KDHome still works....

Greetz,
Nord

[cb3hn]

!!! This Files are faked or expired !!!

Testet with: Duolabs CAS3 Interface + Cerebro card on Humax 5400Z (ToH 3.4 Hot 7.5).

Regards to all...

Sorry for the Message....

but i bought a second cerebro card. Now it works. I guess that my first one was a timebomb inside or a bullet signal from the Provider. All other EMU's work's with the first, ecxept Pre***Wor**. Have no idea why that happen, it died at 9:15 AM today.

best regards to all !!!

[passete]

np mate, i just read that the files from this early morning where fakes and compared it to the uploaded files!!

I now read that the files only work for cerebro cards with Bios version higher than 1.01 :'(

So propably thats my problem :(


Could you check wich Bios Version your card has?
I also tried with 384cz, no luck :(

KDHome still works....

Greetz,
Nord

I just use the cerebro loader v1.06 to check my card, and after that the card is not working anymore !
I have to reset the card and reprogram it again with my cas interface 3,
ouf now it's working again !
The bios of my card is like yours 01.01, so is not a bios problem but a loader problem!
Don't use cerebro loader v1.06 to update your card, because is not working.
Good luck !

[Partyanne]

i've programmed the card with "old" loaderfixed - and the c*card doesn't works! (loader v106 not used before)

my bios 1.01 (tested at second step)

[xbmAsTeR]

hi :)
i´ve programmed my card with the old original loader without timebomb... it still works fine :)

thanx for the files !