A hapet digigoldi me ccam ne Dm E2 , pasi pash qe digigold ish falas per ata qe kan abonim aktiv ,po pati mundsi ndonjeri ta regjistroj filmin Planes (2013) i dubluar shqip, me lajmroni ne pm.
A hapet digigoldi me ccam ne Dm E2 , pasi pash qe digigold ish falas per ata qe kan abonim aktiv ,po pati mundsi ndonjeri ta regjistroj filmin Planes (2013) i dubluar shqip, me lajmroni ne pm.
pershendetje cuna, po postoj configuracionin e mgcamd dhe nje foto te mgcamditOriginally Posted by QIRI
sotfcam,key e kam shkarkuar me hacking sat, keshtu qe celsat jan ne rregull
nuk po arij te kuptoj se ku kam gabuar,
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
kaq e veshtir eshte per tu kuptuar ?pershendetje cuna, po postoj configuracionin e mgcamd dhe nje foto te mgcamdit
sotfcam,key e kam shkarkuar me hacking sat, keshtu qe celsat jan ne rregull
nuk po arij te kuptoj se ku kam gabuar,
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }
Eshte B: { 00 } duhet B: { 06 }
kam instaluar oscam omod ymod t18v49 po nuk po hap dot digiturk. i kam hedhur oscam.key te fundit po nuk jep rezultat. nuk e di tani a e ka fain oscam ymod apo oscam.key . nqs ka mundsi ndonjeri te me postoje nje oscam.key te testuar per tehap digiturk.flm
rrofsh per sugjerimin por perseri e njejta gje
pershendetje di ndonjeri si mund ta instaloj ne menyre manuale oscamin ne dreambox 500s ????
cfare imagi perdore
Pli Jade e perdor
Po deshe me tregon ku i shkarkon ato softcam keys.....? flm
Per PliJade thjesht e ke:
Gjen oscamin qe deshiron per E1(s'ka rendesi se kujt imazhi i perket) dhe pasi i ben unzip merr emulatorin oscam qe zakonisht gjendet ne var/bin.
Permes prog DCC ne /var/bin/ fut emulatorin oscam dhe i jep Atributet 755.
Duhet edhe nje file tjeter qe e krijon vete keshtu: Hap nje notaped dhe brenda tij shkruan psh ymodv18_t49(ne varesi te oscamit qe do te hedhesh) i jep 'save' dhe e emerton oscam. Kete file qe krijove e hedh permes DCC ne /var/etc/plimgr/cams/. Perpara se ta hedhesh duhet ti heqesh prapashtesen .txt, pra nga oscam.txt do ta kthesh thjesht oscam dhe pasi ta hedhesh jepi Atributet 644.
Ndersa ne /var/tuxbox/config/ do futesh filet e tjera:
oscam.server
oscam.conf
oscam.user etj (te gjitha atributet 644)
PS: brenda files oscam qe krijove me notaped nuk eshte e detyrueshme te shkruash gje sic kam permendur me larte. Pra mund ta lesh edhe bosh, thjesht kur ta aktivizosh oscamin nuk do lexoj psh oscam-ymodv18_t49, por vetem oscam. Pra nuk eshte ndonje gje me rendesi si te shkruash ne te si jo. E rendesishme eshte file ne vetvete.
Po keshtu veprohet edhe me emulatore te tjere per PliJade. Pra thjesht merret emulatori qe mund te jete per imazhe te tjere qe e fusim ne /var/bin/ Krijojme vete nje file per mgcamd, cccam etj duke e emertuar ne varesi te emulatorit dhe duke i futur ne /var/etc/plimgr/cams/
KLM
Posting Permissions
