Oscam sh4 компилация от svn

[frz]

Не успявам да компилирам за sh4. Свалям от gfto/oscam в github, после библиотеката за stapi, после ​http://streamboard.de.vu/wbb2/tut-pics/toolchains/toolchain-sh4-tuxbox.bz2.

make sh4 CROSS=../devkit_sh4/tdt/tdt/tufsbox/devkit/sh4/bin/sh4-linux-" EXTRA_CFLAGS=" -I ../devkit_sh4/tdt/tdt/tufsbox/cdkroot/usr/include" EXTRA_LIBS=" -B ../devkit_sh4/tdt/tdt/tufsbox/cdkroot/usr/lib -B ../devkit_sh4/tdt/tdt/tufsbox/cdkroot/lib"

При линкването стигам до cannot find /lib/ld-linux.so.2

И не успявам да намеря начин да я преодолея?

Моля за помощ!

Благодаря!

[ceco2000]

мисля че с това http://www.streamboard.tv/wbb2/threa...d=37367&page=1 ще ти е по-лесно. обърни внимание и на тази тема http://www.streamboard.tv/wbb2/threa...ht=Simplebuild

[frz]

Благодаря! Със този скрипт стана бързо. Гледах да не ползвам скриптове, нито се бях регистрирал във streamboard.

[ceco2000]

то затова човека го е направил,само и единствено за удобство. пък и същия участва активно в развитието на кама, къде за добро къде за лошо.

[rotation]

Що се мъчите?

1. Сваляте си крос компилатор за sh4 - например http://streamboard.gmc.to/wbb2/tut-p...sh4-tuxbox.bz2
2. разархивирате си го
3. изпълнявате в директорията където е оскам `make CROSS=/path/to/where/the/sh4-toolchain-is/bin/sh4-linux-`

това е.

Не се занимавайте с тия cmake тъпотии, губите си времето.

Пък пуснете и `make help` има достатъчно примери как се ползва build системата.

Аз си свалих bz2 крос-компилатора от streambord.tv, разархивирах си го, но има доста файлове, не е само един бин. Трябва да се компилират всички, за да стане един бин или не?

[turbopower]

Изпълняваш както е дал за пример Жоро. Не е един bin в make файла си е описано кой да използва, важното е да си написал правилно префикса на файловете.

[rotation]

[rotation@localhost ~]$ cd /usr/src
[rotation@localhost src]$ cd oscam-svn
[rotation@localhost oscam-svn]$ make CROSS=/home/rotation/Downloads/devkit_sh4/tdt/tdt/tufsbox/devkit/sh4/bin/sh4-linux-
./config.sh: line 365: build/sh4-linux/config.mak: No such file or directory
./config.sh: line 366: build/sh4-linux/config.c: No such file or directory
mkdir: cannot create directory ‘build/sh4-linux’: Permission denied
mkdir: cannot create directory ‘build/sh4-linux’: Permission denied
mkdir: cannot create directory ‘build/sh4-linux’: Permission denied
mkdir: cannot create directory ‘build/sh4-linux’: Permission denied
make: [all] Error 1 (ignored)
+-------------------------------------------------------------------------------
| OSCam ver: 1.20-unstable_svn rev: 10642 target: sh4-linux
| Tools:
|  CROSS    = /home/rotation/Downloads/devkit_sh4/tdt/tdt/tufsbox/devkit/sh4/bin/sh4-linux-
|  CC       = /home/rotation/Downloads/devkit_sh4/tdt/tdt/tufsbox/devkit/sh4/bin/sh4-linux-gcc
| Settings:
|  CONF_DIR = /usr/local/etc
|  CC_OPTS  = -O2 -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
|  CFLAGS   = 
|  LDFLAGS  = -Wl,--gc-sections
|  LIBS     = -lpthread -ldl -lrt
|  UseFlags = 
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH HAVE_DVBAPI IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK CLOCKFIX
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
|  Readers  : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
|  CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI STINGER
|  Compiler : sh4-linux-gcc (GCC) 4.1.1 (STMicroelectronics/Linux Base 4.1.1-23)
|  Config   : build/sh4-linux/config.mak
|  Binary   : Distribution/oscam-1.20-unstable_svn10642-sh4-linux
+-------------------------------------------------------------------------------
cc1: fatal error: opening output file build/sh4-linux/cscrypt/md5.d: No such file or directory
compilation terminated.
make[1]: *** [build/sh4-linux/cscrypt/md5.o] Error 1
make: *** [all] Error 2
[rotation@localhost oscam-svn]$ su root
502Password: 
su: Authentication failure
[rotation@localhost oscam-svn]$ su root
Password: 
[root@localhost oscam-svn]# make CROSS=/home/rotation/Downloads/devkit_sh4/tdt/tdt/tufsbox/devkit/sh4/bin/sh4-linux-
+-------------------------------------------------------------------------------
| OSCam ver: 1.20-unstable_svn rev: 10642 target: sh4-linux
| Tools:
|  CROSS    = /home/rotation/Downloads/devkit_sh4/tdt/tdt/tufsbox/devkit/sh4/bin/sh4-linux-
|  CC       = /home/rotation/Downloads/devkit_sh4/tdt/tdt/tufsbox/devkit/sh4/bin/sh4-linux-gcc
| Settings:
|  CONF_DIR = /usr/local/etc
|  CC_OPTS  = -O2 -ggdb -pipe -ffunction-sections -fdata-sections
|  CC_WARN  = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
|  CFLAGS   = 
|  LDFLAGS  = -Wl,--gc-sections
|  LIBS     = -lpthread -ldl -lrt
|  UseFlags = 
| Config:
|  Addons   : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH HAVE_DVBAPI IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK CLOCKFIX
|  Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
|  Readers  : NAGRA IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
|  CardRdrs : PHOENIX INTERNAL SC8IN1 MP35 SMARGO DB2COM STAPI STINGER
|  Compiler : sh4-linux-gcc (GCC) 4.1.1 (STMicroelectronics/Linux Base 4.1.1-23)
|  Config   : build/sh4-linux/config.mak
|  Binary   : Distribution/oscam-1.20-unstable_svn10642-sh4-linux
+-------------------------------------------------------------------------------
CC    cscrypt/aes.c
In file included from cscrypt/aes.c:1:
cscrypt/aes.h:18:20: error: stdint.h: No such file or directory
In file included from cscrypt/aes.c:1:
cscrypt/aes.h:30: error: expected specifier-qualifier-list before ‘uint32_t’
cscrypt/aes.c:5:20: error: assert.h: No such file or directory
cscrypt/aes.c:6:20: error: stdlib.h: No such file or directory
cscrypt/aes.c:7:20: error: string.h: No such file or directory
cscrypt/aes.c:10: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Te0’
cscrypt/aes.c:77: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Te1’
cscrypt/aes.c:144: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Te2’
cscrypt/aes.c:211: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Te3’
cscrypt/aes.c:279: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Te4’
cscrypt/aes.c:346: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Td0’
cscrypt/aes.c:413: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Td1’
cscrypt/aes.c:480: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Td2’
cscrypt/aes.c:548: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Td3’
cscrypt/aes.c:615: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘Td4’
cscrypt/aes.c:682: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘rcon’
cscrypt/aes.c: In function ‘AES_set_encrypt_key’:
cscrypt/aes.c:696: error: ‘uint32_t’ undeclared (first use in this function)
cscrypt/aes.c:696: error: (Each undeclared identifier is reported only once
cscrypt/aes.c:696: error: for each function it appears in.)
cscrypt/aes.c:696: error: ‘rk’ undeclared (first use in this function)
cscrypt/aes.c:698: error: expected ‘;’ before ‘temp’
cscrypt/aes.c:705: error: ‘AES_KEY’ has no member named ‘rd_key’
cscrypt/aes.c:708: error: ‘AES_KEY’ has no member named ‘rounds’
cscrypt/aes.c:710: error: ‘AES_KEY’ has no member named ‘rounds’
cscrypt/aes.c:712: error: ‘AES_KEY’ has no member named ‘rounds’
cscrypt/aes.c:722: error: ‘temp’ undeclared (first use in this function)
cscrypt/aes.c:724: error: ‘Te4’ undeclared (first use in this function)
cscrypt/aes.c:728: error: ‘rcon’ undeclared (first use in this function)
cscrypt/aes.c: In function ‘AES_set_decrypt_key’:
cscrypt/aes.c:807: error: ‘uint32_t’ undeclared (first use in this function)
cscrypt/aes.c:807: error: ‘rk’ undeclared (first use in this function)
cscrypt/aes.c:809: error: expected ‘;’ before ‘temp’
cscrypt/aes.c:816: error: ‘AES_KEY’ has no member named ‘rd_key’
cscrypt/aes.c:819: error: ‘AES_KEY’ has no member named ‘rounds’
cscrypt/aes.c:821: error: ‘temp’ undeclared (first use in this function)
cscrypt/aes.c:835: error: ‘AES_KEY’ has no member named ‘rounds’
cscrypt/aes.c:839: error: ‘Td0’ undeclared (first use in this function)
cscrypt/aes.c:839: error: ‘Te4’ undeclared (first use in this function)
cscrypt/aes.c:840: error: ‘Td1’ undeclared (first use in this function)
cscrypt/aes.c:841: error: ‘Td2’ undeclared (first use in this function)
cscrypt/aes.c:842: error: ‘Td3’ undeclared (first use in this function)
cscrypt/aes.c: In function ‘AES_encrypt’:
cscrypt/aes.c:870: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
cscrypt/aes.c:870: error: ‘rk’ undeclared (first use in this function)
cscrypt/aes.c:871: error: ‘uint32_t’ undeclared (first use in this function)
cscrypt/aes.c:876: warning: implicit declaration of function ‘assert’
cscrypt/aes.c:877: error: ‘AES_KEY’ has no member named ‘rd_key’
cscrypt/aes.c:883: error: ‘s0’ undeclared (first use in this function)
cscrypt/aes.c:884: error: ‘s1’ undeclared (first use in this function)
cscrypt/aes.c:885: error: ‘s2’ undeclared (first use in this function)
cscrypt/aes.c:886: error: ‘s3’ undeclared (first use in this function)
cscrypt/aes.c:964: error: ‘AES_KEY’ has no member named ‘rounds’
cscrypt/aes.c:967: error: ‘t0’ undeclared (first use in this function)
cscrypt/aes.c:968: error: ‘Te0’ undeclared (first use in this function)
cscrypt/aes.c:969: error: ‘Te1’ undeclared (first use in this function)
cscrypt/aes.c:970: error: ‘Te2’ undeclared (first use in this function)
cscrypt/aes.c:971: error: ‘Te3’ undeclared (first use in this function)
cscrypt/aes.c:973: error: ‘t1’ undeclared (first use in this function)
cscrypt/aes.c:979: error: ‘t2’ undeclared (first use in this function)
cscrypt/aes.c:985: error: ‘t3’ undeclared (first use in this function)
cscrypt/aes.c:1029: error: ‘Te4’ undeclared (first use in this function)
cscrypt/aes.c:1034: error: ‘uint8_t’ undeclared (first use in this function)
cscrypt/aes.c: In function ‘AES_decrypt’:
cscrypt/aes.c:1066: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token
cscrypt/aes.c:1066: error: ‘rk’ undeclared (first use in this function)
cscrypt/aes.c:1067: error: ‘uint32_t’ undeclared (first use in this function)
cscrypt/aes.c:1073: error: ‘AES_KEY’ has no member named ‘rd_key’
cscrypt/aes.c:1079: error: ‘s0’ undeclared (first use in this function)
cscrypt/aes.c:1080: error: ‘s1’ undeclared (first use in this function)
cscrypt/aes.c:1081: error: ‘s2’ undeclared (first use in this function)
cscrypt/aes.c:1082: error: ‘s3’ undeclared (first use in this function)
cscrypt/aes.c:1160: error: ‘AES_KEY’ has no member named ‘rounds’
cscrypt/aes.c:1163: error: ‘t0’ undeclared (first use in this function)
cscrypt/aes.c:1164: error: ‘Td0’ undeclared (first use in this function)
cscrypt/aes.c:1165: error: ‘Td1’ undeclared (first use in this function)
cscrypt/aes.c:1166: error: ‘Td2’ undeclared (first use in this function)
cscrypt/aes.c:1167: error: ‘Td3’ undeclared (first use in this function)
cscrypt/aes.c:1169: error: ‘t1’ undeclared (first use in this function)
cscrypt/aes.c:1175: error: ‘t2’ undeclared (first use in this function)
cscrypt/aes.c:1181: error: ‘t3’ undeclared (first use in this function)
cscrypt/aes.c:1225: error: ‘Td4’ undeclared (first use in this function)
cscrypt/aes.c:1230: error: ‘uint8_t’ undeclared (first use in this function)
make[1]: *** [build/sh4-linux/cscrypt/aes.o] Error 1
make: *** [all] Error 2
[root@localhost oscam-svn]#

Не правя нещо като хората или не съм си изтеглил правилният компилатор?

[woooow]

Заппочни като за начало със симпълбилд скрипта. Ако все пак не искаш да го използваш отиваме на варианта с инсталиране на stlinux и ползване не неговия компилатор.
Успех!

[turbopower]

Цял stlinux за един oscam ще е загуба на време. Прав си ако не му се чете simplebuild е най-лесното решение в случая.
Ето пример как аз правя cross compilation на oscam за телевизора ми. За целта съм си инсталирал едно ubuntu чрез docker. Dockerfile съм го прикачил по долу.

export PATH=$PATH:/opt/toolchain/VDLinux-armv7a8/VDLinux-v7a8/bin
make CROSS=/opt/toolchain/VDLinux-armv7a8/bin/arm-v7a8-linux-gnueabi-

[rotation]

Заппочни като за начало със симпълбилд скрипта. Ако все пак не искаш да го използваш отиваме на варианта с инсталиране на stlinux и ползване не неговия компилатор.
Успех!

Питам какво не е наред с това, което правя, копирах и грешките от конзолата, тъй като следвах указанията на колегата gfto.
Бъркам ли нещо, доколкото стоплям всичко си правя по трите стъпки на колегата gfto, обаче нещо не се получава.

Колкото до STLinux, инсталирал съм си компилатора, проблемчето е че не ми дебъгва сорса, трябва ми развойна среда, ама тя не се продава на всеки, за съжаление не съм от избраните :)