γιατι μπαν ο γιαννακης ρε παιδια εχασα επεισοδεια??:-d τα sd απο τουρκο παιζουν μια χαρα στις 7
γιατι μπαν ο γιαννακης ρε παιδια εχασα επεισοδεια??:-d τα sd απο τουρκο παιζουν μια χαρα στις 7
Καλησπέρα και από εμένα είμαι εντελώς άσχετος και μου ήρθε στα χέρια μου ένας δέκτης EDISION Argus Picollo ip hd και έχω βάλει την τελευταία έκδοση του σερβιτόρου αλλά το θέμα μου είναι ότι ρύθμισα το internet αλλά δεν ξέρω τί πρέπει να βαλώ στους servers Βοηθήστε με σας παρακαλώ !!!
αν εχεις server περασε το χειροκινητα???δοκιμασες το ip tv παιζει καλα η κολαει σαν τον highspeed????Originally Posted by krispos
exw valei xeirokinhta tis ip alla den mou anoigei ta kodikopoihmena kanalia prepei na exw kapoia sindromi auto einai to thema gt exw enan server sto grafeio alla einai small businiss gia na travaw backup apo tous allous ipologistes
Καλησπέρα σε όλους . Σας έχω μία ερώτηση . Γιατί δεν μου ανοίγουν τα γαλλικά πακέτα στον Άστρα με mgcamd ενώ με oscam παίζουν κανονικά ? Μου παρουσιάζετατ και στον pingulux αλλά και στον xtrend 10000 που έχω. Attach έχω και τo cfg.
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 02 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 00
# network ecm timeout in seconds
K: { 02 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 newcamd, camd3, radegast, cccamd, gbox
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 14711
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
#L: { 03 } 192.168.0.101 514 /tmp/mgcamd.log
L: { 01 } 127.0.0.1 514 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
An ennoeis ta TNT ( Viaccess ) anoigoun (ektos tou oscam) mono me cccam 2.30.Ta seca (0100) anoigoun kai me mgcamd .Sto pingulux to B: (11),sto xtrent (07).
To pingulux den exei cccam.
Euxaristw gia tin apantisi . Ta kanalia ta pairnw apo servitor. Sto pingulux ennoousa me enigma2 to douleuw me ena vix4 image.
μετα απο αναβαθμιση απο σατ σοφτ το progresive hd c δεν βγαζει σημα.περασα με rs232 γνησιο λειτουργικο πανω παλι τα ιδια.ολα λειτουργουν κανονικα ,σημα υπαρχει μ αλλο κουτι δοκιμασμενα.ξερει κανεις τιποτα.,,,
Κάνε μια επαναφορά εργοστασιακών ρυθμίσεων μπας και...
Βγαλ' το και για λιγο απο το ρευμα μηπως..
Posting Permissions
Reply With Quote