Gbox Server under windows

[abg1979]

Hello

I'm trying to install a Gbox server on a windows PC.

I'm using an infinity USB unlimited and a vi@cce$s card. The infinity is in phoenix mode running on a virtual COM2 port.

Here is the gbox_cfg file I'm using :

W: { 00 00 } 9600
G: { 03 }
C: { 01 }
M: { 01}
A: { 02 }
U: { 02 }
H: { 01 }
T: { 00 }
O: { 00 } 192.168.2.2
L: { 00 } 192.168.2.2
Z: { 01 10 } 192.168.2.2 XXXX
V: { 00 02 }

I'm using Gbox Control V1.9j on windows XP.

When I start the gbox, it can't see my card. Here is the log I get :

Installing ioperm driver...

Starting Gbox, please wait...
Seasonport=0 speed=9600
OSD (dbox2) IP = 192.168.2.2

gbox 2.1B/Windows&DOS@X86 ( Dec 2 2005, 02:46:51 )
mode 03
AU:02/update:02/KeyFile:00 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00
could not open ./irdeto
could not open ./seca
could not open ./via
could not open ./nagra
could not open ./conax
My IP 192.168.002.002 ID 444C (192.168.2.2) pass XXXXXXXX, we are online
IP 192.168.002.102 Port XXXX-XXXX ID C444 pass YYYYYYYY sharelevel 5/5 (192.168.2.102)
enx_conf = 3 ; reset on zap=0
Total 1 ports to monitor
monitoring port: XXXX
CPU 80X86 compatible
TPSCrypt 1 PTS 1/1
/dev/ttyS1 opened with 1 multicam(s)
mode: any pid
have to init card 11
entering main loop
ReRead pmt.tmp
->HelloL to 192.168.2.102 (192.168.002.102:XXXX)
ReRead pmt.tmp
ReRead pmt.tmp
<-Hello from 192.168.2.102 port XXXX
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****
ReRead pmt.tmp
->HelloL to 192.168.2.102 (192.168.002.102:XXXX)
**** hashTableECM 0 elements ****
**** hashTableEMM 0 elements ****

Could you please help me ? I was searching and reading forums for the last two weeks, I can't figure it out.

Thanks in advance;

[tombrate]

try this V: { 01 0F }

[lhaj18]

try this v: { 01 0f }

can someone give me all tools for sharing, with a starsat 4200 d or a 6300 cu super.
Thanks for advance

[abg1979]

try this V: { 01 0F }

I changed the V line like that and here is what I get :

enx_conf = 3 ; reset on zap=0
Total 1 ports to monitor
monitoring port: 5555
CPU 80X86 compatible
TPSCrypt 1 PTS 1/1
Could not open rs232 port /dev/ttyS0 (No such file or directory)
/dev/ttyS1 opened with 1 multicam(s)
mode: any pid
entering main loop
ReRead pmt.tmp

Still not working

[ovidiumarius]

You must use newcs + cs2gbox + gbox and the card will work 100%.
Gbox don't handle usb device.

[abg1979]

You must use newcs + cs2gbox + gbox and the card will work 100%.
Gbox don't handle usb device.

Could you please help me configuring newcs + cs2gbox + gbox ?

I tried that, but I don't think I'm configuring well the files.

I'm always using gbox control, as it has gbox, newcs and cs2gbox. If I start newcs and cs2gbox first, gbox won't start, and when I start gbox first, newcs and cs2gbox won't start.

Can you give me a the good configuration ?
I'm doing all this on a lan :
- IP of server : 192.168.2.2
- IP of client : 192.168.2.102
- port : anyone
- Infinity USB unlimited is in mode virtual com port COM2
- I have a local vi@cce$s card
- gboxwell as a client (advise me if I should use another one)

PS. : I already succeeded to make newcs alone read the card, but the problem was making client connect to it (says "unknown user tryed to login").

[brippi68]

The advice that I give to you is to change version of gbox.
You use a corrupted version.
You test version 1.9 h!

[abg1979]

The advice that I give to you is to change version of gbox.
You use a corrupted version.
You test version 1.9 h!

Hi, I'm not sure that I understand.

are you advising me to use 1.9h or are you saying that I'm using the version 1.9h which is corrupted ?

Actually I'm using gbox version 2.1b (and now switched to 2.25) and I'm using gbox control version 1.9j.

Still the same problem with these versions.

[Rupi_Droupi]

I changed the V line like that and here is what I get :

enx_conf = 3 ; reset on zap=0
Total 1 ports to monitor
monitoring port: 5555
CPU 80X86 compatible
TPSCrypt 1 PTS 1/1
Could not open rs232 port /dev/ttyS0 (No such file or directory)
/dev/ttyS1 opened with 1 multicam(s)
mode: any pid
entering main loop
ReRead pmt.tmp

Still not working

I have the same config (approximatly) ...
I use :
V: { 00 05 }
AND configure your Phoenix mode on 6 Mhz

[serenadefinance]

u mean without Newcs and cs2gbox?