Manually Enter BISS - HIVION HV 9090x II

[mingle]

Hi everyone,

I have a HIVION HV 9090X II receiver with a USB port and two card slots.

I want to manually enter BISS keys or load them through the USB interface.
I have read many post that speak on a hidden menu, but I cannot access it via the instructions given.

however, I have been able to transfer the channel info and software from the receiver onto my USB thumb drive, but the channel info is not ASCII format so I can not edit it.

Any help would be appreciated. Below is my menu.

My menu structure is as follows...

Menu -
1)
Installation -----------------> "000" --->
Service organization
STB Setting
STB Status
CAS

2)
Antenna Setting
Auto Sat Search
Manual TP Search
Blind Scan
Transfer Data -------------->
Reset factory Settings
USALS Setup

3)
Transfer Main S/W
Transfer Channel Data
USB Transfer -------------->

4)
Channels
Main S/W

[mingle]

Here is some additional information that may help.

HIVION HV 9090X II USB
Model: 07E0A126
H/W Ver: 2.16.00
S/W Ver: 1.09.6A

Thanks

[mingle]

I have tried "1234" , "0000", "9999" and every other possible combination I have found posted and nothing works.

Help....

[affsilva]

Have you tried : Menu / stb setting / 1234 ?

[hmjk]

Menu ---> CAS ---> red key in R. C.

[mingle]

Have you tried : Menu / stb setting / 1234 ?

Yes I did. Nothing happens....

[mingle]

Menu ---> CAS ---> red key in R. C.

This does not work either....

[mingle]

I'm I missing something really obvious here???

I'm assuming these BISS codes are stored internal to the receiver. Do you need a Smart Card?

Also, when I use the USB feature to download the channel data "_CH_DATA.SGN" it is encrypted. Does this file contain the BISS keys? I read in another post that a file named "_K_DATA.SGN" contains the BISS Keys. It advised renaming a key file to "_K_DATA.SGN" and loading it via the USB feature, but the USB load did not recognize that it was on my thumb drive.

[zeid25]

we have hivion 9090x
Menu / stb setting / 1234

[mingle]

we have hivion 9090x
Menu / stb setting / 1234

I tried that and it does not work. what h/w and s/w version does your box have?

Mine is..
Model ID 07E0A126
H/W 2.16.00
S/W 1.09.6A

Thanks