Diablo light - Diablo WI-FI - Diablo 2 - Fausto etj

[ELISGJYLAMETI]

cfare kanalesh mund te shikoj me ket cam

ne
eutelsat w2

dhe hotbird 13

[turizem2002]

O njerez, sot ne disa site pashe se ekzistonte nje programues i cili mund te progromonte disa cam te ndryshem poashtu dhe karta te ndryshme dhe shum prestigjoze, poashtu dhe cmimi ishte interesant me i lire se diablo cam3, me ate qe pashe un dhe kuptova mund te hapje me shum kriptime.
Ka mundesi ndonjeri nga ju te me jape info me te thella per kete progamer???




Super GAP EVOLUTION


SuperGap Evolution

Here comes one of the best and most complete SmartCard programmer in the market. This powerful tools allows the user to make all the functions a SmartCard programmer can do.
It connects to the Serial COM Port of your PC but can work even with an USB2COM converter.
It supports the following Emulations:
Phoenix/SmartMouse at 3,579 Mhz and 6,00 Mhz. You can set them using the function buttons.
Ludipipo PIC and EEProm programmer. You can program a PIC 16 family (PIC 16F84/A or PIC 16F876/877) directly from the SmartCard connector or simply using the programming sockets. You can even program a Microchip's 12 Family like 12C508/A or 12C509/A from the Dip sockets. This emulations works great with ICprog software.
SuperGap Mode. Using this emulations you can program most of the SmartCard, Microchip's PIC based or Atmel's AVR based.
Clony and Clony Prog. Using this Emulation you can clone (copy in Stand Alone mode) one of the supported SmartCard. You need the Copier Module to alloe the programmer to work in stand-alone mode. You can even program a SmartCard you want to copy directly into the copier using the "Clony Prog" function.

Using the SuperGap mode you can program the following SmartCard:

- Wafer Card/Gold Card (PIC16F84A+24LC16)
- Blue Card (PIC16F84A+24LC64)
- PicCard 628 (PIC16F628)
- PicCard 2 (PIC16F876)
- PicCard 2 + EEProm 24LC32 (PIC16F876+24LC32)
- Silver Card/PicCard 2 + EEProm 24LC64 (PIC16F876+24LC64)
- Green Card (PIC16F876+24LC128)
- Purple Card/FunCard (AT90S8515+24LC64/65)
- Fun Card 3 (AT90S8515+24LC128)
- Fun Card 4 (AT90S8515+24LC256)
- Fun Card 5(AT90S8515+24LC512)

* This list might be uptaded. To check all the available and supported SmartCard you'd better download the latest version of Microprog software.

Here comes some more interesting features of this SmartCard Programmer.

- Multifunctional 16x2 backlighted display with contrast regulation.
- 2 Multifunction buttons to help you in choosing the modality.
- Buzzer. Acustical Buzzer that advises you on each operation the programmer is working at.
- External 9 Volts Power supply. you can make the programmer working even with a 9 Volts battery.
- 6 Leds to make you see the Data Trasmission/Receiving and much more.
- Optional Copier Module.
- DIP programming Sockets that supports the Microchip's 16 and 12 PIC families.
- ISP - In circuit Serial Programming Strip Pin board. you can program your chips directly in your board without removing them. There a simple and market Strip Pin Board to make this feture user friendly.






Flm per interesimin!!!

[tironci]

Sa te dush.Tek eutelsati ke digitalbin bashke me Digi gold dhe supersport
Ne hotbird ke sexview te gjith kanalet,hapen nga i her ca kanale tjera si french lover,etj

[tironci]

Diablo2.3 key.bin without the KabelKiosk Control Words as whole KabelKiosk package opens with Conax keys on 2.3 version

19/01/09 Al Jazeera Sports +1 +2 & +4 13E CCWs - thx Sofien72tu/Ramzen
19/01/09 Euro1080 HD 7°E (data.bin 19/1, UW156) - thx UW Team
12/01/09 SexView 13°E (data.bin 12/1) - thx UW Team
12/01/09 Cys Feed 42°E Radio Biss Key (12476H 27500) - thx absat

NB Recommended settings CAIDs [MAIN] or [MTV_LTD], AutoPMT [OFF],Fixed CW [ON] (for MTV Unlimited channels use CAIDs [MTV_LTD] for Canal+ NL channels TRACETV, MEZZO, MOTORS & YACHT/SAIL CH on 19.2E use [MAIN]. Reason Seca CAID conflicts with Conax CAID on 19.2E MTV Unlimited). 13E RAI & 4W Mediatech use Fausto Emulator or 8W KabelKiosk RAI or use the Seca Gold/Fun Cards included in the zip - thx toredo

Constant Control Words: Turn Fixed CW [ON] also in most cases turn Auto PMT [OFF] Unless Control Word CAID not in CAID file
- Equidia Pro P1 12380V 27500 - Hotbird 13E (CAID 0100 *Seca only work with "MAIN" or other CAID file with Seca 0100 presant)
- JSC+1, JSC+2 11179H 27500 - Hotbird 13E (CAID 0500)
- JSC+4 11296H 27500 - Hotbird 13E (CAID 0500)

*Not tested by myself (only have Diablo Light2.3 myself) Under Fausto/Season interface but now Cryptoworks Card Key06 added to Cryptoworks providers and all Betacrypt Tuneled Nagra2 idents now added (shamelessly taken from Saoud007's key.bin), advised to work ok with Fausto Emulator, please let me know if any problems - thx Saoud007.

Note: File is named after last update done, this does not (especially in the case of channels opened with Control Words {CCWs}) mean the channel/package named will open, please read info in this thread and on the forum as to what is currently open

[Fiku75]

Cfare kanalesh mund te shikoj me ket cam

ne eutelsat w2
dhe
ne hotbird

Me ndihmoni me frekuenca

ju faleminderit

egziston kjo teme atje mund ti shofesh.

ktu; http://www.satsupreme.com/showthread.php?t=61193&page=3

[Fiku75]

O njerez, sot ne disa site pashe se ekzistonte nje programues i cili mund te progromonte disa cam te ndryshem poashtu dhe karta te ndryshme dhe shum prestigjoze, poashtu dhe cmimi ishte interesant me i lire se diablo cam3, me ate qe pashe un dhe kuptova mund te hapje me shum kriptime.
Ka mundesi ndonjeri nga ju te me jape info me te thella per kete progamer???




Super GAP EVOLUTION


SuperGap Evolution

Here comes one of the best and most complete SmartCard programmer in the market. This powerful tools allows the user to make all the functions a SmartCard programmer can do.
It connects to the Serial COM Port of your PC but can work even with an USB2COM converter.
It supports the following Emulations:
Phoenix/SmartMouse at 3,579 Mhz and 6,00 Mhz. You can set them using the function buttons.
Ludipipo PIC and EEProm programmer. You can program a PIC 16 family (PIC 16F84/A or PIC 16F876/877) directly from the SmartCard connector or simply using the programming sockets. You can even program a Microchip's 12 Family like 12C508/A or 12C509/A from the Dip sockets. This emulations works great with ICprog software.
SuperGap Mode. Using this emulations you can program most of the SmartCard, Microchip's PIC based or Atmel's AVR based.
Clony and Clony Prog. Using this Emulation you can clone (copy in Stand Alone mode) one of the supported SmartCard. You need the Copier Module to alloe the programmer to work in stand-alone mode. You can even program a SmartCard you want to copy directly into the copier using the "Clony Prog" function.

Using the SuperGap mode you can program the following SmartCard:

- Wafer Card/Gold Card (PIC16F84A+24LC16)
- Blue Card (PIC16F84A+24LC64)
- PicCard 628 (PIC16F628)
- PicCard 2 (PIC16F876)
- PicCard 2 + EEProm 24LC32 (PIC16F876+24LC32)
- Silver Card/PicCard 2 + EEProm 24LC64 (PIC16F876+24LC64)
- Green Card (PIC16F876+24LC128)
- Purple Card/FunCard (AT90S8515+24LC64/65)
- Fun Card 3 (AT90S8515+24LC128)
- Fun Card 4 (AT90S8515+24LC256)
- Fun Card 5(AT90S8515+24LC512)

* This list might be uptaded. To check all the available and supported SmartCard you'd better download the latest version of Microprog software.

Here comes some more interesting features of this SmartCard Programmer.

- Multifunctional 16x2 backlighted display with contrast regulation.
- 2 Multifunction buttons to help you in choosing the modality.
- Buzzer. Acustical Buzzer that advises you on each operation the programmer is working at.
- External 9 Volts Power supply. you can make the programmer working even with a 9 Volts battery.
- 6 Leds to make you see the Data Trasmission/Receiving and much more.
- Optional Copier Module.
- DIP programming Sockets that supports the Microchip's 16 and 12 PIC families.
- ISP - In circuit Serial Programming Strip Pin board. you can program your chips directly in your board without removing them. There a simple and market Strip Pin Board to make this feture user friendly.






Flm per interesimin!!!

nuk je içik si jasht teme? ai programues ka egzistu qysh kur ka qene gjall skenderbeu.
ato smartcard qe programon ai jane aq te vjetra sa s'thuhet.

po te interesoi ky aparat hape ne nje teme te vecante, se ktu jemi jasht teme dhe qe pastaj ta fshij kte mesazh.

[benardi]

kam blere nje diablo cam 2.3 dhe neser me vjen nje programues Cas Interface 3 Plus

por une nuk di si ta perdor ,a ka mundesi te me ndihmoje njeri ketu se jam fillestar ne kete fushe

rrespekte per te gjithe ata qe do me ofrojne ndihme

[ELISGJYLAMETI]

plako fute ne aparat se duhet te jete i karikuar.
nqs jo duhet te presesh

[Fiku75]

kam blere nje diablo cam 2.3 dhe neser me vjen nje programues Cas Interface 3 Plus

por une nuk di si ta perdor ,a ka mundesi te me ndihmoje njeri ketu se jam fillestar ne kete fushe

rrespekte per te gjithe ata qe do me ofrojne ndihme

ktu http://www.satsupreme.com/showthread.php?t=61193&page=3

ke firmware te fundit per diablo cam.

1. istalo cas studio 8.6b merre ktu
2. lidh cas3 me pc
3. hape tek seksioni diablo cam dhe lidh diablon me aparatin cas3 bashke me skeden dummy card qe ka aparati. shif figuren "dummy2"
4. futi firmwarin me emer "Underworld157.dup" qe do e gjesh ktu
5. kliko "start update" dhe prit qe te mbaroje.
6. merr ca pop korn dhe shif nej film te bukur ke digigold se programimi mbaroi.

[benardi]

fiku shume grazie per ndihmen tani sapo i shkarkova ato qe me the ti