Carte TNT sat fonctionne avec dreambox

[thatave]

bonjour


pour "msirda"

peut tu poster ici ton newcs.xml de newenigma2 qui tourne en tntsat...

il se trouve en var/tubox/config

( en cachant ton port et tes pass bien entendu..)


Merci d'avance..

[msirda]

Salut,

Avec l'image newenigma2 c'est déjà tout préparé d'avance y a rien a faire d'autres ....

Le premier c'est pour la 800HD et j'ai remarqué que ça passe par Newcamd

Je vous met le CCcam.cfg modifié a remplacer

A vos test

<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface.
<listening-ip>127.0.0.1</listening-ip> -->
</globals>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>
<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>

<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>general</type>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>

<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>mpcs</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>No</enabled>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig><?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
-->
<newCSconfig>
<globals>
<!-- valid value for listening-ip are:
IPv4 adress of local interface.
<listening-ip>127.0.0.1</listening-ip> -->
</globals>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 0000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
Yes, No - Enable or Disable radegast server. -->
<enabled>No</enabled>
<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10001</port>
<allow>
<!-- valid value for hostname are:
all, IP-address or DNS-name. -->
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<!-- valid value for emm are:
0-255 - Number of EMM's to cache. -->
<emm>20</emm>
<!-- valid value for ecm are:
0-255 - Number of ECM's to cache.
-1 - Dynamic ECM Cache. -->
<ecm>-1</ecm>
</cache>
<httpd>
<server> <!-- Port to accept connections on -->
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for browser to logon (its case sensitive). -->
<name>newcs</name>

<!-- valid value for password are:
Any password you'd like - Used for browser to logon (its case sensitive). -->
<password>newcs</password>

<!-- valid value for accesslevel are:
admin, stats - Define what rights the user has in the web-console -->
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<!-- valid value for password:
Max 25 characters and minimum 8, this is case-sensitive. -->
<password>NewCSpwd</password>
<!-- valid value for mode:
simple, advanced - Set TCP-Console to advanced mode to get access to
potentially dangerous features.-->
<mode>simple</mode>

<!-- valid value for level are:
normal, verbose, spam - How extensive debug should be. -->
<level>normal</level>
<!-- valid value for type are:
Init, general, ecm, emm, net, all - Section of debug that should be displayed. -->
<type>general</type>
<!-- valid value for output are:
Console, udp, tcp, file, all - Where to show debug. -->
<output>console,tcp</output>
<!-- console_options are so you can set own loglevel/type for console-logger:
Should hold level and type-tags like above. -->
<console_options>normal,init</console_options>
<!-- valid value for logfile are:
Path and filename - Where to write debug logs if file or all is chosed in output. -->
<logfile>/hdd/newcs.txt</logfile>
<!-- file_options are so you can set own loglevel/type for file-logger:
Should hold level and type-tags like above. -->
<file_options>spam,all</file_options>
<!-- valid value for udp_host are:
IP-address or DNS-name - Where to send debug if udp or all is chosed in output. -->
<udp_host>192.168.1.10</udp_host>
<!-- valid value for udp_port are:
0,65535 - Which port to send the udp packets. -->
<udp_port>1000</udp_port>
<!-- udp_options are so you can set own loglevel/type for udp-logger:
Should hold level and type-tags like above. -->
<udp_options>normal,init</udp_options>

<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<tcp_port>1001</tcp_port>
<!-- tcp_options are so you can set own loglevel/type for tcp-logger:
Should hold level and type-tags like above. -->
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<!-- valid value for enabled are:
Yes, No - Enable or Disable newcamd server. -->
<enabled>Yes</enabled>
<!-- valid value for name are:
Any name - Used to identify server to remote clients,
if the remote client isnt newcamd, this field have no purpouse. -->
<name>newcs</name>
<!-- valid value for deskey are:
any 14x2 numbers - Used to encrypt the communication between
the client and the server. -->
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<!-- Notes about users:
The first user doesnt have au without beeing it set to on (unlike newcamd cardserver).
You can add as many user-sections as you want, just put them under eachother. -->
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>dummy</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>mpcs</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>dummy</password>
<!-- valid value for hostname are:
IP-address or DNS-name - Used for reverse login to the client.
<hostname>127.0.0.1</hostname> -->
<!-- valid value for port are:
0-65535 - Which port reverse login to the client. -->
<port>21000</port>
<!-- valid value for au are:
On,Off - Wheather the client are allowed to send EMM to the server. -->
<au>on</au>
<!-- valid value for sidoverride are:
On,Off - Wheather the client are allowed to override the SID-filter. -->
<sidoverride>off</sidoverride>
<!-- valid value for readers are device name,
if one <allow> present, other readers will be disabled!
<readers>
<allow>Cardreader</allow>
</readers>
-->
<!-- valid value for spider are:
Yes,No - Wheather the client are allowed to be newcamd Cardspider. -->
<spider>No</spider>
<!-- valid value for rate are:
1-60 - number of seconds between each ecm -->
<rate>2</rate>
<!-- valid value for cardlevel are:
1 - If its set Mgcamd will use all cards over the same port. -->
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- enable or disable the server, valid values are yes/no -->
<enabled>No</enabled>
</server>
<peer> <!-- Connect to remote Chamelon server with the below credentials -->
<hostname>localhost</hostname>
<!-- valid value for tcp_port are:
0,65535 - Which port to listen for incomming tcp connections. -->
<port>1234</port>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</peer>
<user>
<!-- valid value for userfile are:
Any username you'd like - Used for client to logon (its case sensitive). -->
<name>myname</name>
<!-- valid value for password are:
Any password you'd like - Used for client to logon (its case sensitive). -->
<password>mypassword</password>
<!-- Not yet implemented, this will be how chameleon will connect to more than one network -->
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>

CCcam.cfg

# uper slot with newcs
N: 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# lower slot with newcs
N: 127.0.0.1 34000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
# mpcs for 1833to1702
N: 127.0.0.1 15000 mpcs dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

#Smargo USB Support
SERIAL READER : /dev/usb/tts/0 smartreader+
#SERIAL READER : /dev/usb/tts/1 smartreader+

@+

[Tokosu]

Bonsoir à tous,


Attention il y a des versions CCcam 2.1.1 et NewCS 1.66 nommées avec les mêmes noms et mêmes dates, seuls les CRC32 peuvent différenciés les versions et aussi les infos dans les readme des auteurs.


Version compatible avec Gemini2 v4.20, CRC32 B7474AE0 :
e2-mipsel-CCcam_2.1.1_090503.tar.gz

Version compatible avec Gemini2 v3.x à v4.10, CRC32 EF805E9D :
e2-mipsel-CCcam_2.1.1_090503.tar.gz

Aucun problème de compatibilité avec images Gemini2 :
e2-CCcam-Config_2.1.0_090327.tar.gz


Version compatible avec Gemini2 v4.20, CRC32 689D3F30 :
e2-mipsel-newcs_1.66_090522.tar.gz

Version compatible avec Gemini2 v2.x à v4.10, CRC32 878A42DC :
e2-mipsel-newcs_1.66_090522.tar.gz

Aucun problème de compatibilité avec images Gemini2 :
e2-NewCS-Config_1.62_081110.tar.gz


Tous ces logiciels CAM et CAM Config sont compatibles avec les Dreambox 7025 / 800 / 8000.

[Tokosu]

Les répertoires des fichiers de configuration de logiciel CAM.


DM7025, DM800, DM8000 :

/etc/ CCcam.cfg (CCcamd)
/etc/scam/ config (Scam)
/etc/tuxbox/config/ newcs.xml (NewCS)
/usr/keys/ mg_cfg (MGCamd)
/usr/tuxbox/config/ newcamd.conf (MGCamd avec NewCS)
/usr/keys/ mbox.cfg (Mbox)
/usr/keys/ camd3.config (Camd3.xxx)
/usr/keys/ camd_cfg (Evocamd)


DM500, DM56xx, DM600, DM7000, DM7020 :

/var/etc/ CCcam.cfg (CCcamd)
/var/scam/ config (Scam)
/var/tuxbox/config/ newcs.xml (NewCS)
/var/keys/ mg_cfg (MGCamd)
/var/tuxbox/config/ newcamd.conf (MGCamd avec NewCS)
/var/keys/ mbox.cfg (Mbox)
/var/keys/ camd3.config (Camd3.xxx)
/var/keys/ camd_cfg (Evocamd)
/var/bin/ Hypercam.cfg (Hypercam)

[pmike]

salut a tous

comment installer hypercam sur une dm800


Merci a tous

[rve0033]

Bonsoir à tous,


Attention il y a des versions CCcam 2.1.1 et NewCS 1.66 nommées avec les mêmes noms et mêmes dates, seuls les CRC32 peuvent différenciés les versions et aussi les infos dans les readme des auteurs.


Version compatible avec Gemini2 v4.20, CRC32 B7474AE0 :
e2-mipsel-CCcam_2.1.1_090503.tar.gz

Version compatible avec Gemini2 v3.x à v4.10, CRC32 EF805E9D :
e2-mipsel-CCcam_2.1.1_090503.tar.gz

Aucun problème de compatibilité avec images Gemini2 :
e2-CCcam-Config_2.1.0_090327.tar.gz


Version compatible avec Gemini2 v4.20, CRC32 689D3F30 :
e2-mipsel-newcs_1.66_090522.tar.gz

Version compatible avec Gemini2 v2.x à v4.10, CRC32 878A42DC :
e2-mipsel-newcs_1.66_090522.tar.gz

Aucun problème de compatibilité avec images Gemini2 :
e2-NewCS-Config_1.62_081110.tar.gz


Tous ces logiciels CAM et CAM Config sont compatibles avec les Dreambox 7025 / 800 / 8000.

Salut Tokosu
celà veut-il dire que ça fonctionne chez toi avec gemini2 ??
Et si oui, as tu modifié quelque chose dans tes fichiers cfg ?
Merci l'ami

[Tokosu]

Salut,


Rve0033

Désolé je n'ai jamais testé la TNTSAT, c'est juste une liste de compatibilité et identification des fichiers.


Pmike

Désolé aucune version Hypercam compatibles DM7025, DM800, DM8000.

[rve0033]

Salut,


Rve0033

Désolé je n'ai jamais testé la TNTSAT, c'est juste une liste de compatibilité et identification des fichiers.

Slt,
merci
A+

[kaon2300]

Bonjour,

Est-ce que quelqu’un peut me confirmer que si j’achète un terminal TNTSAT non HD, que je prends cette carte pour la mettre dans ma dreambox 800, j’aurais alors accès aux chaines HD ?
Ou alors faut-il acheter un terminal TNTsat HD pour avoir une carte avec des droits supplémentaires et décoder ainsi les chaines HD avec le dreambox.

Les cartes tntsat sont propriétaires mais sont elles différentes entre les tntsat sd et tntsat hd ?

Merci à vous.
http://www.satsupreme.com/images/smilies/smile.gif

[ppdj]

Bonjour,

Est-ce que quelqu’un peut me confirmer que si j’achète un terminal TNTSAT non HD, que je prends cette carte pour la mettre dans ma dreambox 800, j’aurais alors accès aux chaines HD ?
Ou alors faut-il acheter un terminal TNTsat HD pour avoir une carte avec des droits supplémentaires et décoder ainsi les chaines HD avec le dreambox.

Les cartes tntsat sont propriétaires mais sont elles différentes entre les tntsat sd et tntsat hd ?

Merci à vous.
http://www.satsupreme.com/images/smilies/smile.gif

bjr: pour l'instant on reçoit les chaînes HD avec la carte fourni avec un récepteur sd sur une dreambox mais pour l'avenir !!!