SilverCard viacess 2.6

[finchley]

some quotes from different cam/ receivers used
program hex file as FLASH (eeprom leave empty)

in Diablo configuration turn off Auto PMT, turn Viaccess ON in CAS configuration and insert card.... working all porn channels in 11727 Ver 27500 3/4
thanks it works great even in the card slot of my tm 6800hd, i used a cas3 to program the card with no probs.
DM 800 ccam 2.1.3 works
but work ok on the diablo cam
receiver must read viaccess cards to read this
working in diablo 2 and icecrypt cam

I finally found a working combination for me - silvercard, black via cam and my ancient Nokia 9600.
working here with silvercard
and matrix reloaded,
must work 100% in viaccess red and Diablo 2.3 if you program silver card OK....
Clears in Black Ice and Black viaccess cams & Diablo 2 Cam

working in Diablo 2.3!!!!
just enable Viaccess in CAS setting (this is important.... viaccess card not working if this not enabled)
and turn off AUTO PMT......
Matrix reloaded cam loaded with MR1180 and silver card working 100%

[ik6gzm]

This is how i programmed file open cas 3 (cas studio 8.7) click on smartcards then on card programmer load the file but only load as flash memory dont ask why as i dont know but as i said flash memory then programme .
when you click on card programmer the first time the language may need to be changed as mine came up in italian.
i hope this is of some help to you and just incase your not sure what opens with the file its sct on hotbird ,adult package,s1-7 and sct.

I continue this conversation in english, maybe some other could find interess in it...
I haven't CAS3, I use a simple programmer for pic and eeprom, with a smartcard reader and icprog as software. Everytime I've programmed the PIC with a loader (if it's necessary to program the eeprom too) and after the PIC again with the relative file...
In this case, I've programmed only the PIC, because no other files are presents in the file zip... but cannot see nothing, the cam said "check the card!" only...
I'll try again this evening, maybe with better luck, but would like to know if some others had the same problems.
Thanks again

[ik6gzm]

maybe with no patched cam it's impossible to see anything. I have an original VIACCESS CAM, not a diablo, icecrypt, Matrix or something else...
Perhaps could be there the problem?
Greetings

[finchley]

maybe with no patched cam it's impossible to see anything. I have an original VIACCESS CAM, not a diablo, icecrypt, Matrix or something else...
Perhaps could be there the problem?
Greetings

try the multi prog 2 if you can load as flash only i have not tried with any of card loaders in the zip file but i used them all in the past .(you may have to install on your pc)

[Cdd]

some quotes from different cam/ receivers used
program hex file as FLASH (eeprom leave empty)

in Diablo configuration turn off Auto PMT, turn Viaccess ON in CAS configuration and insert card.... working all porn channels in 11727 Ver 27500 3/4
thanks it works great even in the card slot of my tm 6800hd, i used a cas3 to program the card with no probs.
DM 800 ccam 2.1.3 works

but work ok on the diablo cam
receiver must read viaccess cards to read this
working in diablo 2 and icecrypt cam

I finally found a working combination for me - silvercard, black via cam and my ancient Nokia 9600.
working here with silvercard
and matrix reloaded,
must work 100% in viaccess red and Diablo 2.3 if you program silver card OK....
Clears in Black Ice and Black viaccess cams & Diablo 2 Cam

working in Diablo 2.3!!!!
just enable Viaccess in CAS setting (this is important.... viaccess card not working if this not enabled)
and turn off AUTO PMT......
Matrix reloaded cam loaded with MR1180 and silver card working 100%

DM 800 ccam 2.1.3 works
^^^
You really full of bullshit , this card is NOT recognised by CCcam 2.1.3 in ANY DBOX , so stop writing bullshit (CCcam blocks pic-cards)

[ik6gzm]

Sorry to say that IS NOT a bullshit!
I've programmed the silvercard with another software (not ICPROG) and put it into an old VIACCESS CAM, set the HUMAX in configuration as CARD+EMU and can see all the package.
Maybe in DBOX had to adjust some settings... At the beginning I had also failed all test, after new checks I obtained light!
Greetings

[finchley]

DM 800 ccam 2.1.3 works
^^^
You really full of bullshit , this card is NOT recognised by CCcam 2.1.3 in ANY DBOX , so stop writing bullshit (CCcam blocks pic-cards)

First of all if you open your eyes and read the post it says some quotes onthe top line,which i have copied from elsewhere and posted here to help members like ik6gzm who is now sorted secondly you if you had an inch of brain you would not cuss someone first without putting a proper question on the thread or forum with your problem, like ik6gzm had.

[Grizou0]

In first time, you can say big Thank at Mister Nydadvb for her great work.
Even if he did not give his authorization to distribute her here.
Good to Nokia 9800 demo.

Thank.

[nydadvb]

In first time, you can say big Thank at Mister Nydadvb for her great work.
Even if he did not give his authorization to distribute her here.
Good to Nokia 9800 demo.

Thank.

of course you have ! :)

[reds003]

any chance to includ the bis channels also ??