Re: Clarke-Tech Dr.HD F16 Repair-Reparar Ctech

[CurroHD]

You can return to ct5000cplus after using the firmware dr?

1.yes, with this file [Repair Pack (USB). zip]

also where can I find Dr HD F16 firmware?

2.Here the latter is 215p

There is also a tutorial on how to load and use?

3.here

[benny/9]

many thanks for the info and file i will give it ago as soon as possible
and post the results. to return to 5000cplus software do i load both files in the
repair pack file?

[CurroHD]

many thanks for the info and file i will give it ago as soon as possible
and post the results. to return to 5000cplus software do i load both files in the
repair pack file?

Yes.

Dr.HD F16 to Clarke-Tech:

1: istall using null-modem cable [RS232] or USB firmware: F16_100_USB.STB

2: istall using null-modem cable [RS232] or USB: boot_HTM8000_7109_USB.STB

3: You can istall any fimware of Clarketch.

[benny/9]

this is the results of useing the Dr.HD F16 on the Clarke-Tech5000c plus:
first the firmware loads first class and the menu's are much better and clearer
than the 5000 menu's the only problem i have is i cant get any of the scrambled
chns open and this software does'nt recognise the softcam i tried both with the
loader panel and a memory stick if i use a cam the channels do open very fast and
it gives good quality on all the chns, am i right in thinking the F16_215p. firmware
was a emu patch and not clarke-tech official firmware? as a patch i cant understand
why it does'nt open ie: digi-tv etc. or am i missing something in useing this firmware

[CurroHD]

Pack to convert your Clarke-Tech 5000 HD Combo Plus to Dr.HD F16.

[CurroHD]

Convert your Ctech to Dr.HD F16

[CurroHD]

Pack to convert your Dr.HD F16 to Clarke-Tech 5000 HD Combo Plus.

[CurroHD]

Convert your Ctech to Dr.HD F16

this Firmware is prepared to open the Viaccess channels the 218p not are prepared.

[CurroHD]

benny/9

this is the results of useing the Dr.HD F16 on the Clarke-Tech5000c plus:
first the firmware loads first class and the menu's are much better and clearer
than the 5000 menu's the only problem i have is i cant get any of the scrambled
chns open and this software does'nt recognise the softcam i tried both with the
loader panel and a memory stick if i use a cam the channels do open very fast and
it gives good quality on all the chns, am i right in thinking the F16_215p. firmware
was a emu patch and not clarke-tech official firmware? as a patch i cant understand
why it does'nt open ie: digi-tv etc. or am i missing something in useing this firmware

Hi, test the 217p Firmware.
The new 218p not are prepared to open the Viaccess channels.
greetings.

[benny/9]

many thanks for the extra files help and info
i have now loaded the drhd f16 217 patch on
my ct5000cplus and everything is first class much
better menu's and picture quality the viaccess chns dont open
but all other available chns with the patch are open, my next problem
is finding patches in future for the drhd f16 i cant see them posted anywhere
any info on this would be very helpfull, once again thanks for your help.